Search found 20 matches

by firtzbrau
Tue Oct 16, 2012 4:42 pm
Forum: [D] Support
Topic: ua40 d5003 restarting after factory reset
Replies: 7
Views: 4740

Re: ua40 d5003 restarting after factory reset

I already successfully unbricked my TV using this method several times. BTW it seems to be your last option before you send it for repair :-(
by firtzbrau
Mon Oct 15, 2012 9:52 pm
Forum: [D] Firmware
Topic: Hotel hack for Smarthub-less TVs?
Replies: 29
Views: 22408

Re: Hotel hack for Smarthub-less TVs?

Update : there is actually a version 1005.1
I read elsewhere on the forum that some versions of T-MSV4DEUC the have shell unlocked but I dunno on which ones. If someone knows I'm interested.
by firtzbrau
Mon Oct 15, 2012 8:21 am
Forum: [D] Hardware
Topic: EX-Link Cable don't work
Replies: 9
Views: 6744

Re: EX-Link Cable don't work

the pin 4 ( TX on the TV side ) has a pull up resistor to the 3.3v line , but the pin 11 does'nt. Anyway data is always present on pin 4 at startup. Maybe is it a level compatibility problem ?
by firtzbrau
Sat Oct 13, 2012 5:40 pm
Forum: [D] Brainstorm
Topic: TV sound over DLNA
Replies: 5
Views: 11200

Re: TV sound over DLNA

interesting question ! Could the TV be both client and server ?
If you get root access to the shell it may be possible to compile a DLNA server , stuff it into the TV and start it. Am I wrong ?
by firtzbrau
Sat Oct 13, 2012 5:13 pm
Forum: [D] Hardware
Topic: EX-Link Cable don't work
Replies: 9
Views: 6744

Re: EX-Link Cable don't work

ah right , sorry :D BTW i'm a technician in electronics and i keep on swapping TX and RX lines :-)
If my memory's correct there's no pull up resistor on RX pin.
So the problem is that you get no data from the TV ?
by firtzbrau
Sat Oct 13, 2012 4:28 pm
Forum: [D] Support
Topic: Ex-link cable issues - Samsung UE40D6530
Replies: 17
Views: 12449

Re: Ex-link cable issues - Samsung UE40D6530

You'll get no echo of what you type in unless you entered the proper codes to unlock the TDM. maybe your cable is ok ?

@neil75 : you have to use the ex link cable , PC vga output is useless in this case
by firtzbrau
Sat Oct 13, 2012 3:23 pm
Forum: [D] Hardware
Topic: EX-Link Cable don't work
Replies: 9
Views: 6744

Re: EX-Link Cable don't work

Stupid question , but did try to swap TX and RX lines ?
On the tv that have a VGA input the Ex link is wired to it . otherwise you should find a "service" jack socket
by firtzbrau
Sat Oct 13, 2012 2:39 pm
Forum: [D] Support
Topic: MAC adress on a PS51D490
Replies: 12
Views: 10811

Re: MAC adress on a PS51D490

Here is the MAC address: ============================== [ TDsEEPROMStore Debug Menu ] ------------------------------ 0x01 : Create 0x02 : Destroy 0x03 : FlagCreate 0x04 : Read 0x06 : Physical Read 0x09 : Nvram Crash Verify ------------------------------ 0x99 : Exit Debug ----------------------------...
by firtzbrau
Sat Oct 13, 2012 1:26 pm
Forum: [D] Support
Topic: MAC adress on a PS51D490
Replies: 12
Views: 10811

Re: MAC adress on a PS51D490

i added wired LAN. Some D490 main boards are fitted with SEMS23 ( not all of them tho) which has full embedded LAN controller , so it doesn't need the external Realtek controller. I just had to solder the missing ethernet socket and a few jumpers to get the hardware ready. I'll take some photos as s...
by firtzbrau
Fri Oct 12, 2012 11:36 am
Forum: [D] Firmware
Topic: Hotel hack for Smarthub-less TVs?
Replies: 29
Views: 22408

Re: Hotel hack for Smarthub-less TVs?

on T-MSV4DEUC 1006 The shell is locked for defs :-( this firmware is pretty tightly locked by many ways... and it seems there is no earlier version

Go to advanced search