Search found 32 matches

by aimaim
Fri Dec 07, 2018 11:48 pm
Forum: [F] Support
Topic: TV silently turns on in the background
Replies: 4
Views: 293

Re: TV silently turns on in the background

The last couple of weeks I used these settings: OTN = ON, OTA = OFF I realized that the tv does still turn on silently, yet it turns back off shortly afterwards. It seems, that the tv attempts an update, fails (because the urls are blocked by the router) and then shuts down. When OTN is OFF the tv s...
by aimaim
Wed Dec 05, 2018 12:17 pm
Forum: [F] Support
Topic: TV silently turns on in the background
Replies: 4
Views: 293

Re: TV silently turns on in the background

sectroyer wrote:
Fri Nov 30, 2018 10:37 am
with OTN ON it is GUARANTEED that tv will "silently turn on" :) You might think it doesn't do it but it will :) Sooner or later it will boot and update :)
I blocked the samsung update servers in my router, so this should not happen right? Or does otn refer to the tv-network such as dvb-s?
by aimaim
Fri Nov 16, 2018 7:11 pm
Forum: [H] Software
Topic: [App] libAmbiLight E/F/H (MST-only)
Replies: 119
Views: 9112

Re: [App] libAmbiLight E/F/H (MST-only)

Since there are problems with many V_LEDS and H_LEDS value combinations I decided on using exactly adonis' values in my 99_100_AmbiLight.init (H_LEDS=36 V_LEDS=18). I have a 55" tv and a 60 led/m strip. That's why I tweaked the sketch to use each color value it receives for two leds. Since the ratio...
by aimaim
Wed Nov 14, 2018 8:59 am
Forum: [F] Support
Topic: TV silently turns on in the background
Replies: 4
Views: 293

Re: TV silently turns on in the background

When I set OTN back ON and OTA back to GENERAL, the tv does not power on secretly. Now I've set OTA back OFF and kept OTN ON to see what happens then. (Of course I blocked updates using my router.) I've tested all four combinations of OTA/OTN settings: OTN = OFF, OTA = OFF --> silent boots OTN = ON,...
by aimaim
Mon Nov 12, 2018 11:09 am
Forum: [F] Support
Topic: TV silently turns on in the background
Replies: 4
Views: 293

TV silently turns on in the background

Hello everybody, my UE55F6770 (MST) recently had a problem, which caused me to perform a factory reset and reroot. Probem solved (so I thought). After resetting and rerooting everything worked like it should except, that after turning the tv off via ir-remote, it silently restarts itself sometimes. ...
by aimaim
Thu Nov 08, 2018 6:36 pm
Forum: [H] Software
Topic: [App] libAmbiLight E/F/H (MST-only)
Replies: 119
Views: 9112

Re: [App] libAmbiLight E/F/H (MST-only)

I noticed that I need different color orders when using the REVERSE parameter vs not using it. Without REVERSE I need GBR With REVERSE GRB results in the right colors. But I discovered another issue: samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libAmbiLight.so H_LEDS:35 V_LEDS:19 SERVER_IP:192....
by aimaim
Wed Nov 07, 2018 10:02 pm
Forum: [H] Software
Topic: [App] libAmbiLight E/F/H (MST-only)
Replies: 119
Views: 9112

Re: [App] libAmbiLight E/F/H (MST-only)

I think I got it sorted out. The COLOR option seems to have caused the flashing (dunno why). When I turned it off the colors were mixed up, but not flashing any more. Then I just had to find the right color order for the sketch, that fixes the color-mix-up from libScreenshot aswell as the one from t...
by aimaim
Wed Nov 07, 2018 9:27 pm
Forum: [H] Software
Topic: [App] libAmbiLight E/F/H (MST-only)
Replies: 119
Views: 9112

Re: [App] libAmbiLight E/F/H (MST-only)

The flashing between two colors is strange. Can you test with different color-orders, like GBR, GRB... etc... and see what happens? I tested all six possible color orders and wrote them down using the following scheme: <color order> <test color red on tv> --> <color(s) on led-strip> <test color gre...
by aimaim
Wed Nov 07, 2018 8:17 am
Forum: [H] Software
Topic: [App] libAmbiLight E/F/H (MST-only)
Replies: 119
Views: 9112

Re: [App] libAmbiLight E/F/H (MST-only)

Since the log-outputs do writing-operations to the TV, which cause a huge load to the system, I disabled them by default. They're only visible when using TEST parameter. The flashing between two colors is strange. Can you test with different color-orders, like GBR, GRB... etc... and see what happen...
by aimaim
Tue Nov 06, 2018 11:11 pm
Forum: [H] Software
Topic: [App] libAmbiLight E/F/H (MST-only)
Replies: 119
Views: 9112

Re: [App] libAmbiLight E/F/H (MST-only)

Apart from the crashing problem when using different led numbers, I have a blinking problem. In this example I'm using: samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libAmbiLight.so H_LEDS:36 V_LEDS:18 SERVER_IP:192.168.1.131 SERVER_PORT:5050 OFFSET:17 REVERSE COLOR This can be seen best when I ...

Go to advanced search