any and all responses related to my questions would be much appreciated.
can anybody tell me if this is accurate so far?
T-CHEAUSC firmware exists on both TVs. Also the answer to first post: firmware indicates it is CI model.
I don`t know if here is a way to resolve your video sync problem, might DCA module with updated codecs might help here, but i can`t be 100% sure...
Regarding the PN58B850, the reason I assumed I could not use FFB is because the firmware listed under it's compatibilty list for PNxxB8XXX, is T-CHE7AUSC on this page
http://forum.samygo.tv/viewtopic.php?f=5&t=2038 please correct me if I am wrong.
P.s. it would'nt let me put the xttp:// in front of the urls, because of some strange error that I am a new user and that it looked too spammy using offsite urls even though the urls are onsite, please somebody fix that. I was referencing this sites pages.
it won't let me put in http
Firmware is important, not model...
To be sure, you could make dumps with SG Dump maker lite and give me for inspection.
what model tv do you have juuso? do you have problems with .mpg files?
the reason I ask if samyGo apps and hacks can fix my video playback issues is because on this page vww.samygo.tv/ I see on the fifth line down on the tv screen in the video of the samsung booting this is written "checking MPEG TS playback fix.. OK".
IS THIS THE ANSWER TO THE .MPG PLAYBACK ISSUE?
telnet-enabler.tar.gz file in the fully automatic way, nor could I copy over the telnet enabler "SamyGo telnet enabler Trojan" in the partially automatic way (both of these links are here ttp://wiki.samygo.tv/index.php5/Forced_revert_back_to_older_firmware). In either case I would get "an unknown error has occured" when I tried to copy over the trojan. (*please put an h at the beggining of the link, the board will not allow me to post a full web link*)
I guess samsung had not figured out the loophole in firmware 1017.2 which was on the PN58B650, but they patched it right up on firmware 1018.2 which is on the PN58B850.
So since I cannot enable telnet access, does that mean my only choice now is to use FFB?
I'm also guessing that I can not use the telnet enabler on this page ttp://wiki.samygo.tv/index.php5/How_to_enable_Telnet_on_samsung_TV%27s until I have firmware that supports SamyGO apps? (*please put an h at the beggining of the link, the board will not allow me to post a full web link)
PN58B850, but I have three questions to ask of you first.
1. what version FFB should I use, v0.5.9 or v0.6.2 ?
2. what unrestricted original firmware is best for PN58B850?
3.where can I find the image files for PNxxB8XX that are supposed to be here ttp://forum.samygo.tv/viewtopic.php?f=5&t=2038?
(Don't forget to put the h on the link above)