I noticed under the libraries part of 90_90_injectso.init I currently have the below string but when I ftp to the tv and check the location they look different to the string (pic below) do I have to change anything in 90_90_Injectso.init??
My current string:
Code: Select all
libraries="/mtd_tlib/GGame/SamyApp/loader.so" # add your libraries here
I can't seem to FTP correctly into the tv anymore. When I do I get this.
I add that I added ftp to libraries list in injectso have I screwed up? I have the virtual usb mounting automatically now but need to set the dca app to load automatically and remove ftp. Please helps.... :S
Got samygo extensions to start auto + DCA module to load auto through injectso. Thank you juuso for all your help and thanks for this project
I'll update further later on
I was just watching an mkv and have had some pretty bad lag while watching :/
Was wondering what the cause of this could be. My network is:
UE40B7000 --->--- CAT5e --->--- 1GbE Router
Synology DS413 --->--- 1GbE Router
If I connect my laptop to the router via CAT5e and transfer a file from the Synology DS413 (5GB MKV) the transfer rate is 100MB per second so I know the network is running fast enough.
I only have samygo and the DCA module running on the tv and even with no other devices connected to the network I still seem to get lag while watching MKV's. I'm also using NFS to connect the TV to the NAS.
I was wondering if the speed of the USB stick I'm using could have an impact? It's a PNY Micro Attache, not the fastest out there :/
Would I be able to do the same if I purchase a 4gb transcend and format it as fat16? I was doing a bit of research and found that a fat16 drive would be faster. Was thinking of test playing a 4gb+ mkv to see if everything would be ok with this?
tested a 16GB Kingston DTSE9 last night to see if it would stop some of the lag, worked ok but after a while started to get lag again.
trying a transcend 330 4GB usb formatted as FAT16 to see if it makes any distance.
I don't understand the why it lags from time to time, my network is more than quick enough and the nas can operate at 100MB per second am I on the wrong track with the usb drive being the problem?
could it be that the processor in the tv or maybe network processor can't put up with the DCA app module + playing mkv's?
any ideas? still going to keep everything the way it is but just wondering if there is anything I can do to improve it
Who is online
Users browsing this forum: No registered users and 2 guests