[How-To] Hacking C series TV. Models with Internet@TV only

Here is information about customize your C series firmware..:!:This forum is NOT FOR DUMMY USERS questions or problems but DEVELOPER.

User avatar
decix
Posts: 95
Joined: Thu Dec 30, 2010 11:18 pm
Location: Germany

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by decix » Sat Apr 30, 2011 8:05 pm

1) no
2) no
3) no. and btw... you really don't need ssh, telnet fits all your needs.

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by juusso » Thu May 26, 2011 9:06 am

Sometimes it is good to spend time and read on forum/wiki instead of asking the questions. :roll:
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by juusso » Mon Jun 13, 2011 12:12 pm

probutus
AFAIK this is technical info - errors and so on. Arris69 can explane better.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by arris69 » Mon Jun 13, 2011 2:26 pm

probutus wrote:

Code: Select all

recorder share not mounted!
sendmail: Cannot open mail.zsolttech.com:32628
Why is the SamyGO-Toolchain trying to send mails to mail.zsoltech.com
because it can
and what is their content?
http://wiki.samygo.tv/index.php?title=S ... _Structure

as example:

Code: Select all

/.version
Emulated T-GAPDUMMY
/sys/selp/vd/lspinfo/*
cat: /sys/selp/vd/lspinfo/*: No such file or directory
/proc/modules
nfs 116980 0 - Live 0xbf0d3000
lockd 49716 1 nfs, Live 0xbf0c1000
sunrpc 135100 2 nfs,lockd, Live 0xbf09b000
fuse 40896 2 - Live 0xbf08c000
g_file_storage 19052 0 - Live 0xbf082000
dummy_hcd 11264 1 g_file_storage, Live 0xbf07a000
usbhid 18268 0 - Live 0xbf070000
hid 29332 1 usbhid, Live 0xbf063000
evdev 5632 0 - Live 0xbf05c000
mc44s803 2048 0 - Live 0xbf059000
dvb_usb_vp702x 7240 0 - Live 0xbf052000
dvb_usb 13076 1 dvb_usb_vp702x, Live 0xbf04c000
dvb_core 63592 1 dvb_usb, Live 0xbf037000
i2c_core 11996 2 mc44s803,dvb_usb, Live 0xbf02f000
firmware_class 3880 1 dvb_usb, Live 0xbf029000
ohci_hcd 25756 0 - Live 0xbf01d000
usbcore 97312 6 dummy_hcd,usbhid,dvb_usb_vp702x,dvb_usb,ohci_hcd, Live 0xbf000000
/proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext3 rw,relatime,data=writeback 0 0
none /proc proc rw,relatime 0 0
none /sys sysfs rw,relatime 0 0
none /dev/sam tmpfs rw,relatime 0 0
none /dtv tmpfs rw,relatime,size=20480k 0 0
none /mtd_ram tmpfs rw,relatime 0 0
none /mtd_rwarea tmpfs rw,relatime,size=20480k 0 0
none /etc/passwd tmpfs rw,relatime,size=20480k 0 0
none /etc/profile tmpfs rw,relatime,size=20480k 0 0
vfat /dtv/usb/sda1/upnp fuse ro,nosuid,nodev,relatime,user_id=0,group_id=0 0 0
/proc/version
Linux version 2.6.30.9 (zsolt@crius.zsolttech.com) (gcc version 4.2.0 20070413 (prerelease)) #1 PREEMPT Mon Jun 13 13:16:38 CEST 2011
/proc/cpuinfo
Processor       : ARMv7 Processor rev 0 (v7l)
BogoMIPS        : 319.48
Features        : swp half thumb fastmult vfp edsp neon vfpv3 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc08
CPU revision    : 0

Hardware        : SGemu-ARMv7a pb Samsung SDP1002 Evaluation board
Revision        : 0000
Serial          : 0000000000000000
/proc/bus/usb/devices
cat: /proc/bus/usb/devices: No such file or directory
/dtv/SGO.env
SYSROOT="/mtd_tlib/SamyGO"
MOUNT_PATH="/dtv/usb/sda1"
export MOD_DIR=/mtd_tlib/SamyGO/lib/modules/2.6.30.9
export TMPDIR=/dtv
export HOME=/mtd_wiselink
export SMB_CONF_PATH="/mtd_tlib/SamyGO/etc/samba/smb.conf"
LOGFILE="/mtd_tlib/SamyGO/samygo.log"
LD_LIBRARY_PATH="/mtd_tlib/SamyGO/opt/privateer/lib:/mtd_tlib/SamyGO/opt/privateer/usr/lib:/mtd_tlib/SamyGO/lib:/mtd_tlib/SamyGO/usr/lib::/mtd_exe/Comp_LIB:/mtd_exe/li"
PATH="/mtd_tlib/SamyGO/opt/privateer/sbin:/mtd_tlib/SamyGO/opt/privateer/bin:/mtd_tlib/SamyGO/opt/privateer/usr/bin:/mtd_tlib/SamyGO/opt/privateer/usr/sbin:/mtd_tlib/SamyGO/sbin:/mtd_tlib/SamyGO/bin:/mtd_tlib/SamyGO/usr/bin:/mtd_tlib/SamyGO/usr/sbin:/bin:/usr/bin:/sbin:/usr/sbin"
export ENV="/dtv/.ashrc"
export FRAMEBUFFER="/dev/sam/fb0"
export DISTROOT="/mtd_tlib/SamyGO/opt/privateer"
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: QEMU     Model: QEMU HARDDISK    Rev: 0.14
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi0 Channel: 00 Id: 02 Lun: 00
  Vendor: QEMU     Model: QEMU CD-ROM      Rev: 0.14
  Type:   CD-ROM                           ANSI  SCSI revision: 05
/mtd_tlib/SamyGO/*
-rw-rw-r-- 1 root 0    0 Jun 11  2011 /mtd_tlib/SamyGO/clmeta.dat
-rwxrwxr-x 1 root 0 3779 Mar 28  2011 /mtd_tlib/SamyGO/rcSGO

/mtd_tlib/SamyGO/bin:
total 705
-rwxr-xr-x 1 root 0 715980 Jun  8  2011 busybox
-rwxrwxr-x 1 root 0    226 Jun 11  2011 mc.sh

/mtd_tlib/SamyGO/doc:
total 2
drwxr-xr-x 2 root 0 1024 May 28  2011 base-files-samygo-3.0.14
drwxrwxr-x 2 root 0 1024 Jun 11  2011 common-licenses

/mtd_tlib/SamyGO/etc:
total 26
drwxrwxr-x 3 root 0 1024 May 28  2011 Wireless
drwxrwxr-x 4 root 0 1024 Jan  1 00:00 apache2
-rw-r--r-- 1 root 0 3045 Jun  8  2011 busybox.links
-rw-r--r-- 1 root 0  225 Nov 24  2010 fb.modes
drwxrwxr-x 2 root 0 1024 Jun 11  2011 init.d
drwxr-xr-x 3 root 0 1024 Jan  1 00:00 php
-rwxrwxr-x 1 root 0 2618 Jun  7  2011 rc.sysinit
-rw-rw-r-- 1 root 0   32 Jun 11  2011 release
drwxrwxr-x 3 root 0 1024 Jun 11  2011 samba
drwxrwxr-x 2 root 0 1024 Jun 11  2011 ssmtp
-rw-r--r-- 1 root 0 2049 Nov 23  2010 sysctl.conf
drwxrwxr-x 9 root 0 1024 Jun 11  2011 terminfo
-rw-rw-r-- 1 root 0   13 Jun 11  2011 timestamp
-rw-rw-r-- 1 root 0   13 Jun 11  2011 version
-rwxr-xr-x 1 root 0 1915 Nov 23  2010 vsftpd.conf
-rw-r--r-- 1 root 0 4022 Nov 23  2010 wgetrc

/mtd_tlib/SamyGO/firmware:
total 342
-rw-r--r-- 1 root 0 306816 Jun 11  2011 AF15BDA.sys
-rw-r--r-- 1 root 0    252 Jun 11  2011 AF15IRTBL-Skymaster_044.bin
-rwxr-xr-x 1 root 0    126 Jun 11  2011 AF15IRTBL.bin
-rw-rw-r-- 1 root 0    185 Jun 11  2011 README
-rw-r--r-- 1 root 0  12700 Jun 11  2011 dvb-usb-af9015.fw
-rw-r--r-- 1 root 0  10752 Jun 11  2011 dvb-usb-vp702x-01.fw
-rw-r--r-- 1 root 0  10752 Jun 11  2011 dvb-usb-vp7045-01.fw

/mtd_tlib/SamyGO/lib:
total 2
drwxrwxr-x 3 root 0 1024 Jun 10  2011 firmware
drwxrwxr-x 3 root 0 1024 Jun  9  2011 modules

/mtd_tlib/SamyGO/mc:
total 171
drwxrwxr-x 2 root 0   1024 Jun 11  2011 bin
-rw-r--r-- 1 root 0  12278 Nov 23  2010 cedit.menu
-rw-r--r-- 1 root 0    788 Nov 23  2010 edit.indent.rc
-rw-r--r-- 1 root 0    247 Nov 23  2010 edit.spell.rc
drwxrwxr-x 2 root 0   1024 Jun 11  2011 extfs
-rw-r--r-- 1 root 0    213 Nov 23  2010 mc.charsets
-rw-r--r-- 1 root 0  14135 Nov 23  2010 mc.ext
-rw-r--r-- 1 root 0   2979 Nov 23  2010 mc.hint
-rw-r--r-- 1 root 0 124702 Nov 23  2010 mc.hlp
-rw-r--r-- 1 root 0   2205 Nov 23  2010 mc.lib
-rw-r--r-- 1 root 0   8014 Nov 23  2010 mc.menu
drwxrwxr-x 2 root 0   2048 Jun 11  2011 syntax

/mtd_tlib/SamyGO/opt:
total 1
drwxrwxr-x 6 root 0 1024 Jun 11  2011 privateer

/mtd_tlib/SamyGO/phpsysinfo:
total 28
-rw-r--r--  1 root 0  4257 Jun 11  2011 config.php
-rw-r--r--  1 root 0  1490 Jan  3  2011 distros.ini
-rw-r--r--  1 root 0  1357 Aug 19  2007 distros.ini~
drwxr-xr-x  2 root 0  1024 Aug 19  2007 gfx
drwxr-xr-x  2 root 0  1024 Jan  2  2011 images
drwxr-xr-x  6 root 0  1024 Jan  2  2011 includes
-rw-r--r--  1 root 0 11674 Jun 11  2011 index.php
-rw-r--r--  1 root 0  2979 Aug 19  2007 phpsysinfo.dtd
drwxr-xr-x 14 root 0  1024 Jan  2  2011 templates

/mtd_tlib/SamyGO/sbin:
total 0

/mtd_tlib/SamyGO/usr:
total 0
/dtv/*
-rw-r--r-- 1 root 0      807 Jan  1 00:00 /dtv/SGO.env
-rw-r--r-- 1 root 0       96 Jan  1 00:00 /dtv/apache_error_log
crw-r--r-- 1 root 0  13,  64 Jan  1 00:00 /dtv/event0
crw-r--r-- 1 root 0  13,  65 Jan  1 00:00 /dtv/event1
crw-r--r-- 1 root 0  13,  66 Jan  1 00:00 /dtv/event2
crw-r--r-- 1 root 0  13,  67 Jan  1 00:00 /dtv/event3
crw-r--r-- 1 root 0  13,  68 Jan  1 00:00 /dtv/event4
lrwxrwxrwx 1 root 0       25 Jan  1 00:00 /dtv/firmware -> /mtd_tlib/SamyGO/firmware
crw-rw-rw- 1 root 0  10, 229 Jan  1 00:00 /dtv/fuse
crw-r--r-- 1 root 0 251,   0 Jan  1 00:00 /dtv/hidraw0
crw-r--r-- 1 root 0 251,   1 Jan  1 00:00 /dtv/hidraw1
crw-r--r-- 1 root 0 251,   2 Jan  1 00:00 /dtv/hidraw2
crw-r--r-- 1 root 0 251,   3 Jan  1 00:00 /dtv/hidraw3
crw-r--r-- 1 root 0 251,   4 Jan  1 00:00 /dtv/hidraw4
-rw-r--r-- 1 root 0     6108 Jan  1 00:01 /dtv/info
lrwxrwxrwx 1 root 0       26 Jan  1 00:00 /dtv/ssmtp -> /mtd_tlib/SamyGO/etc/ssmtp
-rw-r--r-- 1 root 0   512000 Jan  1 00:00 /dtv/vusb

/dtv/cgi-bin:
total 4
-rwxr-xr-x 1 root 0 698 Jan  1 00:00 test.cgi

/dtv/input:
total 0
crw-r--r-- 1 root 0 13, 64 Jan  1 00:00 event0
crw-r--r-- 1 root 0 13, 65 Jan  1 00:00 event1
crw-r--r-- 1 root 0 13, 66 Jan  1 00:00 event2
crw-r--r-- 1 root 0 13, 67 Jan  1 00:00 event3
crw-r--r-- 1 root 0 13, 68 Jan  1 00:00 event4
crw-r--r-- 1 root 0 13, 63 Jan  1 00:00 mice
crw-r--r-- 1 root 0 13, 32 Jan  1 00:00 mouse0
crw-r--r-- 1 root 0 13, 33 Jan  1 00:00 mouse1
crw-r--r-- 1 root 0 13, 34 Jan  1 00:00 mouse2
crw-r--r-- 1 root 0 13, 35 Jan  1 00:00 mouse3
crw-r--r-- 1 root 0 13, 36 Jan  1 00:00 mouse4

/dtv/usb:
total 0
crw-r--r-- 1 root 0 180, 96 Jan  1 00:00 hiddev0
drwxr-xr-x 4 root 0      80 Jan  1 00:00 sda1

/dtv/www:
total 4
-rw-r--r-- 1 root 0  17 Jan  1 00:00 index.php
drwxr-xr-x 6 root 0 220 Jun 11  2011 phpsysinfo
ifconfig
eth0      Link encap:Ethernet  HWaddr 52:54:00:12:34:56  
          inet addr:10.0.2.15  Bcast:0.0.0.0  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:92 errors:0 dropped:0 overruns:0 frame:0
          TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:15082 (14.7 KiB)  TX bytes:8563 (8.3 KiB)
          Interrupt:25 Base address:0xe000 DMA chan:ff 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

env
DISTROOT=/mtd_tlib/SamyGO/opt/privateer
CONSOLE=/dev/console
LD_LIBRARY_PATH=/mtd_tlib/SamyGO/opt/privateer/lib:/mtd_tlib/SamyGO/opt/privateer/usr/lib:/mtd_tlib/SamyGO/lib:/mtd_tlib/SamyGO/usr/lib::/mtd_exe/Comp_LIB:/mtd_exe/li
OLDPWD=/
HOME=/mtd_wiselink
SELP_EANBLE=11111111
ENV=/dtv/.ashrc
FRAMEBUFFER=/dev/sam/fb0
TMPDIR=/dtv
INIT_VERSION=sysvinit-2.86
TERM=linux
MOD_DIR=/mtd_tlib/SamyGO/lib/modules/2.6.30.9
PATH=/mtd_tlib/SamyGO/opt/privateer/sbin:/mtd_tlib/SamyGO/opt/privateer/bin:/mtd_tlib/SamyGO/opt/privateer/usr/bin:/mtd_tlib/SamyGO/opt/privateer/usr/sbin:/mtd_tlib/SamyGO/sbin:/mtd_tlib/SamyGO/bin:/mtd_tlib/SamyGO/usr/bin:/mtd_tlib/SamyGO/usr/sbin:/bin:/usr/bin:/sbin:/usr/sbin
RUNLEVEL=S
PREVLEVEL=N
PWD=/mtd_tlib/SamyGO
SMB_CONF_PATH=/mtd_tlib/SamyGO/etc/samba/smb.conf
ps
ps: invalid option -- 'e'
BusyBox v1.18.3 (2011-06-12 21:45:50 CEST) multi-call binary.

Usage: ps 

Show list of processes

Options:
        w       Wide output

netstat
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 *:49152                     *:*                         LISTEN      
tcp        0      0 *:80                        *:*                         LISTEN      
udp        0      0 *:55176                     *:*                                     
udp        0      0 localhost:42600             *:*                                     
udp        0      0 *:1900                      *:*                                     
dmesg
Linux version 2.6.30.9 (zsolt@crius.zsolttech.com) (gcc version 4.2.0 20070413 (prerelease)) #1 PREEMPT Mon Jun 13 13:16:38 CEST 2011
CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SGemu-ARMv7a pb Samsung SDP1002 Evaluation board
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c03474f4, node_mem_map c037a000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyS0 root=/dev/sda rw vmalloc=256m SELP_EANBLE=11111111 nodtvlog
NR_IRQS:64
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 256128KB available (3112K code, 317K data, 84K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[SELP] preset_lpj manual setting 1597440
Calibrating delay loop (skipped) preset value.. 319.48 BogoMIPS (lpj=1597440)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 496 bytes
NET: Registered protocol family 16
PCI core found (slot 11)
pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:0d.0: reg 10 io port: [0x00-0xff]
pci 0000:00:0d.0: reg 14 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:0d.0: reg 18 32bit mmio: [0x000000-0x001fff]
PCI: bus0: Fast back to back transfers disabled
PCI map irq: slot 0, pin 1, devslot 12, irq: 27
PCI map irq: slot 0, pin 1, devslot 13, irq: 27
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
SGI XFS with security attributes, no debug enabled
msgmni has been set to 500
alg: No test for stdrng (krng)
io scheduler noop registered (default)
io scheduler deadline registered
Serial: AMBA PL011 UART driver
dev:f1: ttyS0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
console [ttyS0] enabled
dev:f2: ttyS1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
dev:f3: ttyS2 at MMIO 0x101f3000 (irq = 14) is a AMBA/PL011
fpga:09: ttyS3 at MMIO 0x10009000 (irq = 38) is a AMBA/PL011
brd: module loaded
loop: module loaded
PCI: enabling device 0000:00:0d.0 (0100 -> 0103)
sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 27
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
sym0: unknown interrupt(s) ignored, ISTAT=0x5 DSTAT=0x80 SIST=0x0
scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.14 PQ: 0 ANSI: 5
scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
scsi 0:0:2:0: CD-ROM            QEMU     QEMU CD-ROM      0.14 PQ: 0 ANSI: 5
scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
Driver 'sd' needs updating - please use bus_type methods
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
IRQ 25/eth%d: IRQF_DISABLED is not guaranteed on shared IRQs
eth0: SMC91C11xFD (rev 1) at d08ce000 IRQ 25 [nowait]
eth0: Ethernet addr: 52:54:00:12:34:56
eth0: No PHY found
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
LinuStoreIII_TERR: fsr_init[182] Tiny BML_Init: error (90060000)

LinuStoreIII_TERR: fsr_init[183] Check the PAM module

mice: PS/2 mouse device common for all mice
sd 0:0:0:0: [sda] 1077784 512-byte hardware sectors: (551 MB/526 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 0
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) on device 8:0.
Freeing init memory: 84K
================================================================================
 SAMSUNG Genoa-P Kernel
 Version : 1010_223 RELEASE
================================================================================
eth0: link up
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
====================================================================
[SELP] usbcore module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
PCI: enabling device 0000:00:0c.0 (0100 -> 0102)
ohci_hcd 0000:00:0c.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0c.0: created debug files
ohci_hcd 0000:00:0c.0: irq 27, io mem 0x50002400
ohci_hcd 0000:00:0c.0: OHCI controller state
ohci_hcd 0000:00:0c.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:0c.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:0c.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:0c.0: intrstatus 0x00000000
ohci_hcd 0000:00:0c.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:0c.0: hcca frame #0000
ohci_hcd 0000:00:0c.0: roothub.a 00000203 POTPGT=0 NPS NDP=3(3)
ohci_hcd 0000:00:0c.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:0c.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:0c.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:0c.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:0c.0: roothub.portstatus [2] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30.9 ohci_hcd
usb usb1: SerialNumber: 0000:00:0c.0
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 0ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
====================================================================
[SELP] ohci_hcd module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
 ##### call default signal (17) handler
hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
 ##### call default signal (17) handler
====================================================================
[SELP] firmware_class module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] i2c_core module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] dvb_core module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] dvb_usb module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
usbcore: registered new interface driver dvb_usb_vp702x
====================================================================
[SELP] dvb_usb_vp702x module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] mc44s803 module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] evdev module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] hid module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
====================================================================
[SELP] usbhid module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
dummy_hcd dummy_hcd: USB Host+Gadget Emulator, driver 02 May 2005
dummy_hcd dummy_hcd: Dummy host controller
drivers/usb/core/inode.c: creating file '002'
dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 2
usb usb2: default language 0x0409
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Dummy host controller
usb usb2: Manufacturer: Linux 2.6.30.9 dummy_hcd
usb usb2: SerialNumber: dummy_hcd
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: individual port power switching
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 0ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '001'
====================================================================
[SELP] dummy_hcd module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
g_file_storage gadget: File-backed for SamyGO, version: 20 November 2008
g_file_storage gadget: Number of LUNs=1
g_file_storage gadget-lun0: ro=0, file: /dtv/vusb
hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
====================================================================
[SELP] g_file_storage module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 2-1: new high speed USB device using dummy_hcd and address 2
usb 2-1: default language 0x0409
usb 2-1: New USB device found, idVendor=0525, idProduct=a4a5
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: File-backed for SamyGO
usb 2-1: Manufacturer: SamyGO
usb 2-1: SerialNumber: 3230204E6F76
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
g_file_storage gadget: high speed config #1
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
drivers/usb/core/inode.c: creating file '002'
hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
[CIP_KERNEL] /dev/sda
[CIP_KERNEL] 0 is authuld length : file open success(rootfs)  
[CIP_KERNEL] /bin/authuld can read  (after=0)
[CIP_KERNEL] /bin/authuld size is wrong (pre:0, real:38328)
[CIP_KERNEL] >>> (/bin/authuld) file is illegally modified!! <<< 
[CIP_KERNEL] authuld authentication failed
[CIP_KERNEL] [init/main.c::Exception_from_authuld::864]auth failed in kernel. Arris says: don't care.
[CIP_KERNEL] [init/main.c::Exception_from_authuld::864]auth failed in kernel. Arris says: don't care.
[CIP_KERNEL] [init/main.c::Exception_from_authuld::864]auth failed in kernel. Arris says: don't care.
 ##### call default signal (17) handler
fuse init (API version 7.11)
====================================================================
[SELP] fuse module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
====================================================================
[SELP] sunrpc module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] lockd module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] nfs module load!!(2.6.30.9 preempt mod_unload ARMv7 )
====================================================================
 ##### call default signal (17) handler
busybox test
/etc
/etc/inputrc
/etc/modutils
/etc/modutils/rfcomm
/etc/modutils/hidp
/etc/nsswitch.conf
/etc/host.conf
/etc/motd
/etc/mdev.conf
/etc/issue
/etc/profile
/etc/hostname
/etc/init.d
/etc/init.d/mdev
/etc/init.d/hwclock.sh
/etc/init.d/rcS
/etc/init.d/gpm
/etc/init.d/rc
/etc/issue.net
/etc/mdev
/etc/passwd
/etc/filesystems
/etc/terminfo
/etc/terminfo/x
/etc/terminfo/x/xterm
/etc/terminfo/x/xterm-color
/etc/terminfo/x/xterm-xfree86
/etc/terminfo/l
/etc/terminfo/l/linux
/etc/terminfo/v
/etc/terminfo/v/vt200
/etc/terminfo/v/vt52
/etc/terminfo/v/vt100
/etc/terminfo/v/vt102
/etc/terminfo/v/vt220
/etc/terminfo/a
/etc/terminfo/a/ansi
/etc/terminfo/s
/etc/terminfo/s/screen
/etc/terminfo/s/sun
/etc/terminfo/d
/etc/terminfo/d/dumb
/etc/terminfo/r
/etc/terminfo/r/rxvt-unicode
/etc/terminfo/r/rxvt
/etc/udhcpc.d
/etc/udhcpc.d/50default
/etc/default
/etc/default/usbd
/etc/default/rcS
/etc/mtab
/etc/busybox.links
/etc/version
/etc/modprobe.d
/etc/modprobe.d/l2cap.conf
/etc/modprobe.d/sco.conf
/etc/modprobe.d/rfcomm.conf
/etc/modprobe.d/bnep.conf
/etc/resolv.conf
/etc/inittab
/etc/fstab
/etc/inittab.bb
init scripts versions
/mtd_tlib/SamyGO/etc/init.d/01_03_hotplug.init:#       Version: SamyGO svn $Id: 01_03_hotplug.init.dis 1120 2011-04-08 13:13:49Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/01_05_framebuffer.init.dis:#       Version: SamyGO svn $Id: 01_05_framebuffer.init.dis 1119 2011-04-08 13:12:43Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/01_05_hiddev.init:#       Version: SamyGO svn $Id: 01_05_hiddev.init 1080 2011-01-10 15:31:59Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/02_04_replace_wifi_mod.init.dis:#       Version: $Id: 02_04_replace_wifi_mod.init.dis 1099 2011-03-08 10:59:18Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/02_04_vusb.init:#       Version: SamyGO svn $Id: 02_04_vusb.init 1090 2011-01-27 18:37:07Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/02_10_wakelan.init.dis:#       Version: $Id: 02_10_wakelan.init.dis 797 2010-07-27 15:41:59Z arris $
/mtd_tlib/SamyGO/etc/init.d/03_01_fuse.init:#       Version: SamyGO svn $Id: 03_01_fuse.init 1036 2010-11-05 18:47:15Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/03_03_djmount.init:#       Version: SamyGO svn $Id: 03_03_djmount.init 1048 2010-12-10 18:14:44Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/03_03_nfsmount.init:#       Version: SamyGO svn $Id: 03_03_nfsmount.init 1069 2011-01-03 16:47:24Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/03_03_sshd.init:#       Version: SamyGO svn $Id: 03_03_sshd.init 1069 2011-01-03 16:47:24Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/04_04_fusesmb.init.dis:#       Version: SamyGO svn $Id: 04_04_fusesmb.init 1089 2010-11-05 18:55:01Z arris $
/mtd_tlib/SamyGO/etc/init.d/04_04_samba.init.dis:#       Version: SamyGO svn $Id: 04_04_samba.init 1069 2011-01-03 16:47:24Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/06_05_apache.init:#       Version: SamyGO svn $Id: 06_05_apache.init 1117 2011-03-29 22:36:22Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/06_05_bb_httpd.init.dis:#       Version: SamyGO svn $Id: 06_05_bb_httpd.init.dis 1121 2011-04-08 13:15:22Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/06_05_vsftp.init.dis:#       Version: SamyGO svn $Id: 06_05_vsftp.init.dis 1069 2011-01-03 16:47:24Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/06_06_obexpush.init.dis:#       Version: SamyGO svn $Id: 06_06_obexpush.init.dis 1036 2010-11-05 18:47:15Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/70_70_arfix-sh.init.dis:#       Version: SamyGO svn $Id: 70_70_arfix-sh.init.dis 1117 2011-03-29 22:36:22Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/90_90_injectso.init.dis:#       Version: SamyGO svn $Id: 90_90_injectso.init.dis 1027 2010-10-20 06:56:31Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/90_90_loadGameMains.init.dis:#       Version: SamyGO svn $Id: 90_90_loadGameMains.init.dis 1134 2011-05-31 20:30:50Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/99_99_start_exeDSP.init.disabled_by_default_to_protect_the_innocent:#       Version: SamyGO svn $Id: 99_99_start_exeDSP.init.disabled_by_default_to_protect_the_innocent 1115 2011-03-28 09:14:42Z arris69 $
/mtd_tlib/SamyGO/etc/init.d/99_99_z_sendinfo.init:grep Version $SYSROOT/etc/init.d/* >> $INFOFILE

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by arris69 » Mon Jun 13, 2011 2:30 pm

decix wrote:1) no
2) no
3) no. and btw... you really don't need ssh, telnet fits all your needs.
and for what he (end user) need telnet?

arris

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by arris69 » Mon Jun 13, 2011 8:33 pm

dincusor wrote:Arris, if u have some time, can u please help! I was so happy with my tv and i tried a lot of combination, i spent arround 10 hours an no succes. I can not understand what i am doing rong.
I get the samygo virtual usb, upn folder but not smb. I changed allready the samba.init.dis. Thanks in advance for your effort !
i
you have to rename it too.

Code: Select all

mv 04_04_samba.init.dis 04_04_samba.init
but i recommend also to update the scripts from svn http://samygo.svn.sourceforge.net/viewv ... ipt/trunk/
and http://samygo.svn.sourceforge.net/viewv ... nk/init.d/

hth
arris

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: [How-To] Hacking C series TV. Models with Internet@TV only

Post by arris69 » Tue Jun 14, 2011 8:02 am

probutus wrote:...
ah ok! so its configured via a seperate startup script and is no secret backdoor to steal my porn :D
i don't have lot storage space at my server (filled up with toolchains, so no porn sealing :lol: )
BTW: The SamyGO scripts in our wiki seem to be a bit "ancient"...
thats why we have a svn :idea:

arris

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: [How-To] Hacking C series TV. Models with Internet@TV on

Post by juusso » Mon Aug 15, 2011 3:37 pm

I remade Dredkin`s widget and it should work on latest firmwares (T-VALDEUC-3006 - 3009). (thanks murfdude for ideas)
Tester is needed. Recommended for users who are scared about HotelMode hack :)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: [How-To] Hacking C series TV. Models with Internet@TV on

Post by juusso » Wed Aug 17, 2011 6:24 pm

First test failed: widget won`t work. Problem with unzip from widget. Working on it.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

tempinbox
Posts: 317
Joined: Wed May 11, 2011 7:00 pm

Re: [How-To] Hacking C series TV. Models with Internet@TV on

Post by tempinbox » Fri Aug 19, 2011 11:36 am

juuso wrote:I remade Dredkin`s widget and it should work on latest firmwares (T-VALDEUC-3006 - 3009). (thanks murfdude for ideas)
Tester is needed. Recommended for users who are scared about HotelMode hack :)
I juuso please pm me the widget and i'll test it today.

my tv has 3008.3 fw and is a c series

it was first hacked with hotel mode hack for four times and now i can't telnet it with putty because i made a factory reset

i try the dredkin widget but with no luck what are differences of the two hacks?

Post Reply

Return to “[C] Firmware”