SamyGO

Posted: **Tue Sep 16, 2014 8:38 am**

Hello Please Help me...
I Changed My TV Model FROM C7000 to 6900 in Service Menu then Power off.
Now when I Plug TV power Cable, The Power red LED blinking Few second then a blank screen for 1 Second and get turn OFF.
it Felt in this loop... Please help me what is wrong and what can i do...Thanks

Posted: **Tue Sep 16, 2014 8:50 am**

Eeprom reset. Check wiki.

Posted: **Tue Sep 16, 2014 9:12 am**

how can i reset this chip. with a small copper cable? i cant find this model. can i take a picture for you? to help me

Posted: **Tue Sep 16, 2014 9:26 am**

i must connect SDA to VCC or GND? which one?

Posted: **Tue Sep 16, 2014 10:44 am**

To vcc or gnd. As described.

Posted: **Tue Sep 16, 2014 10:51 am**

this is not worked. because tv get off before 20 sec in a loop

SamyGO

Samsung LED UA46C7000 Bricked Problem

Samsung LED UA46C7000 Bricked Problem

Re: Samsung LED UA46C7000 Bricked Problem

Re: Samsung LED UA46C7000 Bricked Problem

Re: Samsung LED UA46C7000 Bricked Problem

Re: Samsung LED UA46C7000 Bricked Problem

Re: Samsung LED UA46C7000 Bricked Problem