[MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips

General forum talking area for M/Q series TVs.

Kazar
Posts: 15
Joined: Fri Jun 01, 2018 10:25 am

Re: [MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips

Post by Kazar » Tue Feb 12, 2019 7:01 pm

ditheo wrote:
Tue Feb 12, 2019 9:20 am
Also our tv has wakeup option via wake on lan feature! I can turn on my tv via internet!
wakeonlan is supported and is possible also without cable but with a wifi connection.
not tested ipv6...but i belive the device is dual stack since ipv6 was launched about 12 years ago

TocaiRed
Posts: 3
Joined: Mon Mar 18, 2019 10:42 pm

Re: [MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips

Post by TocaiRed » Mon Mar 18, 2019 10:50 pm

Hello everyone,

I discover this great forum and I wanted to enable PVR also on my EU40MU6100 TV (firmware 1262.0). The problem is that I don't know how to access the service menu.

I've a SKY remote controller that I normally use with the TV and I tried it also for entering the service menu (without success). I tried MUTE, 1,1,9, ENTER but it is not working, other sequence I'm not sure how to input them from the SKY remote.

Can you please tell me which is the right sequence and if there are other ways to enter? I'll try to get a smartphone with IR if necessary.

Thanks
Tocai

TocaiRed
Posts: 3
Joined: Mon Mar 18, 2019 10:42 pm

Re: [MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips

Post by TocaiRed » Wed Mar 20, 2019 6:53 am

Hi,

I find out that the only way to access the service menu was using the src app (see link below) installed on a LG g3. I now have pvr enabled, thanks to you!

viewtopic.php?f=74&t=10405#p88075

Kazar
Posts: 15
Joined: Fri Jun 01, 2018 10:25 am

Re: [MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips

Post by Kazar » Fri Mar 22, 2019 1:33 am

TocaiRed wrote:
Wed Mar 20, 2019 6:53 am
Hi,

I find out that the only way to access the service menu was using the src app (see link below) installed on a LG g3. I now have pvr enabled, thanks to you!

viewtopic.php?f=74&t=10405#p88075
have you read the first post?
src app is also there ;)

TocaiRed
Posts: 3
Joined: Mon Mar 18, 2019 10:42 pm

Re: [MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips

Post by TocaiRed » Sat Apr 13, 2019 6:34 am

Kazar wrote:
Fri Mar 22, 2019 1:33 am
TocaiRed wrote:
Wed Mar 20, 2019 6:53 am
Hi,

I find out that the only way to access the service menu was using the src app (see link below) installed on a LG g3. I now have pvr enabled, thanks to you!

viewtopic.php?f=74&t=10405#p88075
have you read the first post?
src app is also there ;)
Hi, the link in the homepage is not working.

Anyway I'm again back to you since I found one issue and I'm not sure if it is related to the change I made for pvr.

I realize only now that the image is somehow cutted on the borders. I've tried all possible settings from the standard menu but there is no way to have it right.

Could it be that changin from paneuro to panordig introduce this problem? Right now I don't have the g3 to change back the settings, I'll let you know if this is the cause...

Post Reply

Return to “[M/Q] General”