Controll Q Modell by IP or Serial (Exlink)

General forum talking area for M/Q series TVs.

da2001
Posts: 8
Joined: Tue Feb 20, 2018 8:10 am

Controll Q Modell by IP or Serial (Exlink)

Post by da2001 »

I need to control a Q(7) Modell by IP or serial link for homeautomation purpose. As i understand right, its actual not possible to do that by EXlink, can anybody confirm? Does the Q Models accept WOL Commands to turn it on?
I also tried a lot by HDMI CEC on HDMI1, but the TV doesnt accept these commands. Anynet+ is activated in the settings menue.
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Controll Q Modell by IP or Serial (Exlink)

Post by zoelechat »

Have a look there: EX-Link UART Control
I do NOT receive any PM. Please use forum.
da2001
Posts: 8
Joined: Tue Feb 20, 2018 8:10 am

Re: Controll Q Modell by IP or Serial (Exlink)

Post by da2001 »

This depends on J Series, not Q. I´m a little bit worried to destroy the EX-Link Port with RS232 instead of 3.3v ttl signals. For example.
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Controll Q Modell by IP or Serial (Exlink)

Post by zoelechat »

All Tizen's are not using TTL (J and above)
https://wiki.samygo.tv/index.php?title= ... M/Q_Series
I do NOT receive any PM. Please use forum.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Controll Q Modell by IP or Serial (Exlink)

Post by juusso »

I can confirm, for Q i use stright rs232 cable, not usb/ttl.

LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
da2001
Posts: 8
Joined: Tue Feb 20, 2018 8:10 am

Re: Controll Q Modell by IP or Serial (Exlink)

Post by da2001 »

juusso wrote: Wed Feb 21, 2018 9:57 am I can confirm, for Q i use stright rs232 cable, not usb/ttl.
can you also confirm that powerOn by rs232 works? :shock:
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Controll Q Modell by IP or Serial (Exlink)

Post by zoelechat »

At least, as long as "Instant ON" and "Always Instant ON" options from service menu are enabled (default), TV is in true power (C-)state BUT it unmounts USB, shutdowns panel, speakers and everything possible (you can see it in Exlink debug output). Given that the principle of standby nowadays is to "consume the less possible power", I've got some doubts on any reason for serial to stay alive :)
I do NOT receive any PM. Please use forum.
da2001
Posts: 8
Joined: Tue Feb 20, 2018 8:10 am

Re: Controll Q Modell by IP or Serial (Exlink)

Post by da2001 »

if that fails, i need to move over to turn on the device by hdmicec. But that was my last option, because i already tried to control the device by cec and it doesnt recognize my cec adapter. little bit of hope is left.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Controll Q Modell by IP or Serial (Exlink)

Post by juusso »

Possible i can check late this night or tommorow. If you tell what exactly you need to know :)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
da2001
Posts: 8
Joined: Tue Feb 20, 2018 8:10 am

Re: Controll Q Modell by IP or Serial (Exlink)

Post by da2001 »

No special needs. Just need to turn on/off the tv for homeautomation purpose. Infrared is no option, because of latency and the same IR code for on/off.

Post Reply

Return to “[M/Q] General”