Q7F - 55

General forum talking area for M/Q series TVs.

zoelechat
Official SamyGO Developer
Posts: 8219
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Q7F - 55

Post by zoelechat » Wed May 02, 2018 9:53 pm

Unless you can reach 2018 TV yourself, and if nobody was kind enough to make some awesome pdf like I did for K, there's no known documentation of service menu.
I do NOT receive any PM. Please use forum.

MQ7Rocks
Posts: 27
Joined: Mon Apr 30, 2018 5:15 pm

Re: Q7F - 55

Post by MQ7Rocks » Wed May 02, 2018 10:05 pm

Right so def in 2017 Q series however there is a lot of talk of it using SDDP no idea what that is. These posts are from Sep 2017. In one post the dev says 2017 TVs see below:

ImageImageImageImageImageImageImageImage

Sent from my SM-N950F using Tapatalk


MQ7Rocks
Posts: 27
Joined: Mon Apr 30, 2018 5:15 pm

Re: Q7F - 55

Post by MQ7Rocks » Wed May 02, 2018 10:09 pm

Found this article on SDDP and in August 2017.
https://www.businesswire.com/news/home/ ... gy-2017-4K

Sent from my SM-N950F using Tapatalk


zoelechat
Official SamyGO Developer
Posts: 8219
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Q7F - 55

Post by zoelechat » Wed May 02, 2018 10:18 pm

Well, now I'm a bit more convinced but still have no clue on how to enable it (if possible) :D
I do NOT receive any PM. Please use forum.

MQ7Rocks
Posts: 27
Joined: Mon Apr 30, 2018 5:15 pm

Re: RE: Re: Q7F - 55

Post by MQ7Rocks » Wed May 02, 2018 10:20 pm

zoelechat wrote:Well, now I'm a bit more convinced but still have no clue on how to enable it (if possible) :D
Well going to look over the service menu again it might be directed at SDDP not IP ?

Sent from my SM-N950F using Tapatalk


MQ7Rocks
Posts: 27
Joined: Mon Apr 30, 2018 5:15 pm

Re: Q7F - 55

Post by MQ7Rocks » Wed May 02, 2018 10:21 pm

Oh it also ref MU7000 MU6500 tvs isn't that pre Q7F

Sent from my SM-N950F using Tapatalk


zoelechat
Official SamyGO Developer
Posts: 8219
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: RE: Re: Q7F - 55

Post by zoelechat » Wed May 02, 2018 10:28 pm

MQ7Rocks wrote:
Wed May 02, 2018 10:20 pm
service menu again it might be directed at SDDP not IP ?
No idea, but if you find something please report :)
MQ7Rocks wrote:
Wed May 02, 2018 10:21 pm
Oh it also ref MU7000 MU6500 tvs isn't that pre Q7F
2017 too but mid-range, one letter per year was too simple...
I do NOT receive any PM. Please use forum.

MQ7Rocks
Posts: 27
Joined: Mon Apr 30, 2018 5:15 pm

Re: Q7F - 55

Post by MQ7Rocks » Wed May 02, 2018 11:18 pm

Ok found this article https://developer.samsung.com/tv/develo ... 0030/index

Interesting smart view is what acts as the service that enables SDDP as per the article

zoelechat
Official SamyGO Developer
Posts: 8219
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Q7F - 55

Post by zoelechat » Wed May 02, 2018 11:39 pm

Did you take a look at websockets stuff? Looks related (your article is about older models).
You can grab more infos there: https://github.com/Ape/samsungctl
Won't help from TV off though (but that's the only case).
I do NOT receive any PM. Please use forum.

MQ7Rocks
Posts: 27
Joined: Mon Apr 30, 2018 5:15 pm

Re: RE: Re: Q7F - 55

Post by MQ7Rocks » Fri May 04, 2018 12:34 am

zoelechat wrote:Did you take a look at websockets stuff? Looks related (your article is about older models).
You can grab more infos there: https://github.com/Ape/samsungctl
Won't help from TV off though (but that's the only case).
Ok so just for FYI I remember the Remote app that one can download from here and used Web sockets, so I tested it against the TV over IP. When it was ON this is after enabling CES Concierge Mode in the service menu etc.

It would return a error of 6001 can't connect. Reason behind CES options being enabled is that I read numerous articles stating that they showcased SDDP at CES so there was hope :)

I have tried all 'safe' options I can think of in the service and advanced menus. Still can't connect, interesting if I do a port scan on the TV IP address while it's on it reports 0 ports open which is odd as its wired and can connect to the Internet or other devices on the LAN.

I can't belive this isn't a sw setting somewhere....

I have 'power on using mobile devices' in the network settings in the On Screen Menu set to on, if it worked the way its saying in the settings... I should be able to power it on when it's off

Scanning the network further I see it is broadcasting URNs for screensharing, media device etc i.e urn:samsung:screensharing

I don't know maybe it has a firewall in the software or something?

Sent from my SM-N950F using Tapatalk


Post Reply

Return to “[M/Q] General”