Extended Service Menu after Enabling Hotel Mode

General forum for C series TVs.

User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: Extended Service Menu after Enabling Hotel Mode

Post by beatfreak »

1. Wrong thread for your question ;)

2. sounds like you are in service menu and try to access the hotel mode option without having hotel mode enabled in seperate hotel mode menu (mute119...)




Sent from my Zenithink ZT180v1 - ePad
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
jbaptiste
Posts: 13
Joined: Fri Mar 04, 2011 6:36 am
Contact:

Re: Extended Service Menu after Enabling Hotel Mode

Post by jbaptiste »

beatfreak wrote:1. Wrong thread for your question ;)
Why ?? on this thread everyone is discussing the different options that can be enabled when enabling the extended service menu (PVR, 3D support, channel guide, etc), I don't see how asking about changing the region code on the extended service menu here is wrong.
beatfreak wrote: 2. sounds like you are in service menu and try to access the hotel mode option without having hotel mode enabled in seperate hotel mode menu (mute119...)
Of course I did that, it's mentioned countless times on this thread.
Juancho
UN40C6500 TV
T-VALDTWC-1002.0 firmware
jerrymh
Posts: 8
Joined: Thu Mar 28, 2013 3:09 pm

Re: Extended Service Menu after Enabling Hotel Mode

Post by jerrymh »

In any diference on service mod and extended service mode.

Can I turn this on 40ES6500? The wiki has service mode and extended service mode, but not how to enter each one.
Herold
Posts: 2
Joined: Sat Mar 22, 2014 12:46 pm

Re: Extended Service Menu after Enabling Hotel Mode

Post by Herold »

amuhasan wrote:
ganumor wrote:
amuhasan wrote:Hi I have a 40c650 and i have done a great mistake on service menu !!
after i have turned off and on the panel go unstable and it turns on and off every 10 sec !! and the bottons on the panel or remote donot work. non of them. even i cannot turn off the tv how can i fix this?
You could try to reset the TV to factory condition:
With the television on, hold down the EXIT button for 15 seconds until you're given the option to RESET the TV.
Hi
thank you for your consideration
but tv turn on and off automatic every 10 sec and tv panel bottons or remote bottons donot do anything
i cannot even turn off the tv!!!

Any Help will be greate ;)
i have the same problem, it the Problem solved? please help
danielg90
SamyGO Project Donor
Posts: 28
Joined: Mon May 18, 2015 10:02 pm

Re: Extended Service Menu after Enabling Hotel Mode

Post by danielg90 »

i have samsung c650 firmware t-valdeuc-3018.1 and i want enable pvr, when i go into "control"->"sub control" i haven't "PVR Support".
i have this screen
https://www.dropbox.com/s/3k75zcmem4vy1 ... 9.jpg?dl=0
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: Extended Service Menu after Enabling Hotel Mode

Post by beatfreak »

on 3018.1 you need to send the special remote buttons FACTORY and 3SPEED to enable extende service menu.
there are several methods to do this ( programmable IR, IR-didodes on audio out, LAN-control...)
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
danielg90
SamyGO Project Donor
Posts: 28
Joined: Mon May 18, 2015 10:02 pm

Re: Extended Service Menu after Enabling Hotel Mode

Post by danielg90 »

beatfreak wrote:on 3018.1 you need to send the special remote buttons FACTORY and 3SPEED to enable extende service menu.
there are several methods to do this ( programmable IR, IR-didodes on audio out, LAN-control...)
any tutorial please?

Post Reply

Return to “[C] General”