Is Wifi 5Ghz supported ?

General forum for C series TVs.
Post Reply

Slayer605
Posts: 2
Joined: Fri Jan 08, 2016 1:47 pm

Is Wifi 5Ghz supported ?

Post by Slayer605 » Sun Dec 04, 2016 7:22 pm

I have supported usb dongle. It can use 5Ghz newtworks, but connects only to 2Ghz APs

Code: Select all

\u@tv:\w \$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

ra11n0    Ralink STA  ESSID:"*********"  Nickname:"RT2870STA"
          Mode:Managed  Frequency=2.437 GHz  Access Point: 64:70:02:0E:D4:B9
          Bit Rate=130 Mb/s
          RTS thr:off   Fragment thr:off
          Encryption key:8CB1-A400-D89B-0BC0-96B1-2FE7-0834-E592 [2]
          Link Quality=54/100  Signal level:-60 dBm  Noise level:-71 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
In dmesg output i see this

Code: Select all

usb 2-1: configuration #1 chosen from 1 choice
        not supported device connected  Manufacturer: Ralink     Product : 802.11 n WLAN

Code: Select all

\u@tv:\w \$   iwlist freq
lo        no frequency information.

eth0      no frequency information.

ra11n0    13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Current Frequency:2.437 GHz (Channel 6)

Code: Select all

\u@tv:\w \$ cd /sys/bus/usb/devices/2-1
\u@tv:\w \$ cat product idProduct idVendor manufacturer
802.11 n WLAN
2870
148f
Ralink

Post Reply

Return to “[C] General”