UE46C6000 Main Board has been changed .......

General forum for C series TVs.

sebast29
Posts: 5
Joined: Sat Dec 15, 2018 10:18 am

UE46C6000 Main Board has been changed .......

Post by sebast29 »

Hello everyone, I'm french. Sorry for my bad english ;-) (Google Trad)!

for several weeks, my TV Samsung UE46C6000 was struggling to start (several click clack)
Today I have the message on the screen "main board has been changed. please go into service mode and setup below option .....
i want change setting in the hidden menu but "local set "," model "and" country "are gray .
I have" EDID Fail "and he sees a model" UE46C7700 ".
please help, thank you very much
pepas
Posts: 2
Joined: Mon Jul 30, 2018 8:35 am

Re: UE46C6000 Main Board has been changed .......

Post by pepas »

Hey.
The same thing happened on my TV.
Set the option EDID = ON then select EDID WRITE ALL
Last edited by pepas on Wed Dec 19, 2018 1:01 pm, edited 2 times in total.
sebast29
Posts: 5
Joined: Sat Dec 15, 2018 10:18 am

Re: UE46C6000 Main Board has been changed .......

Post by sebast29 »

hi, thanks you for your answer
i will try this !
i dont see the pictures ! ;-)
pepas
Posts: 2
Joined: Mon Jul 30, 2018 8:35 am

Re: UE46C6000 Main Board has been changed .......

Post by pepas »

I do not understand why the photos are not visible.
I will explain in words.
Try in the menu "EDID" perform the item "EDID WRITE ALL". If after the word "wait" the message "fail" or something like that appears, the motherboard does not correspond to the UE46C7700 model.
If after the word "wait" the message "successful" appears, then everything is fine!
------------------------
Note: to enter the service menu, turn off the TV, then quickly press on the remote control of your TV the next sequence INFO-MENU-MUTE-POWER
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: UE46C6000 Main Board has been changed .......

Post by beatfreak »

Well if the message "Mainbaird changed" appeared without you doing anything along with problems while booting then your Mainboard does not have a bright future. If youre lucky you can find a replacement Mainboard for UExxC6500 or C6800 these should fit for you and give you the upgrade for PVR/Timeshift
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
sebast29
Posts: 5
Joined: Sat Dec 15, 2018 10:18 am

Re: UE46C6000 Main Board has been changed .......

Post by sebast29 »

hello to all, i come back .... ;-)
I repaired the power supply card after the clic / clac problem (2 big capacitor and 2 voltage regulators)
However, I still have an edid error and the famous message "main board has been changed. setup below option .....
i want change setting in the hidden menu but "local set", "model" and "country" are gray.
if I go to the EDID menu and validate, nothing happens. can you help me.
thank you very much

nota: all electronics cards are originals (no buy after)
2019-01-05 15.48.07.jpg
2019-01-05 15.47.49.jpg
2019-01-05 15.47.31.jpg
You do not have the required permissions to view the files attached to this post.
sebast29
Posts: 5
Joined: Sat Dec 15, 2018 10:18 am

Re: UE46C6000 Main Board has been changed .......

Post by sebast29 »

beatfreak wrote: Fri Dec 28, 2018 11:44 am Well if the message "Mainbaird changed" appeared without you doing anything along with problems while booting then your Mainboard does not have a bright future. If youre lucky you can find a replacement Mainboard for UExxC6500 or C6800 these should fit for you and give you the upgrade for PVR/Timeshift
thanks, do you think the mainboard is out of order because i had a problem on power supply ?
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: UE46C6000 Main Board has been changed .......

Post by beatfreak »

its at least possible that your faulty power supply did some damage to those eeproms
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: UE46C6000 Main Board has been changed .......

Post by juusso »

Eeprom could be easy replaced. Worth to try. All what you need is moderate soldering skills and new atmel chip.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: UE46C6000 Main Board has been changed .......

Post by beatfreak »

juusso wrote: Sat Jan 19, 2019 7:38 am and new atmel chip.
will the mainboard be able to flash the new chip with data on its own?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

Post Reply

Return to “[C] General”