I am also looking for an ambilight for my Samy Ue7700C. By scanning the www I found so much solutions for controlling LED-stripes. I think many of you found that too.
All in all there are tow ways.
1. Controlling the LEDs by a computer (pc, arduino, dreambox, vu+ ore something else) which also give the video signal to TV.
2. Controlling the LEDs by a computer (pc, arduino or something else) which grab the video signal.
the longest compilation is therefor
HDMI source --> HDMI Splitter --> HDMI to composite Converter-->composite usb videograbber-->computer-->LED-controller
For both you need a external video source, but I'm using the internal tuner or streaming videos by DLNA.
My intention was to use the analog video out of the TV. That works very good, if you are looking TV content not protected by HD+.
If you switch to a protected HD+ channel, sometimes there is a signal on the video out for a few seconds too. So I guess it's not coded but rather switched off.
I don't know how, but may be anyone here can modify the FW that the analog video out does not switch off?
Than you can use a simple composite usb video grabber with, for example, a Raspberry Pi to control the LEDs.
Maybe someone can give some Ideas how to get DLNA streamed and HD+ contend out of the video out?
Otherwise I will follow this thread further and hope some one will find a solution to get the picture information by the usb port.
I started the project recently and i got it all working. But whan i switched to the plex app to start streaming it just went dead... If i knew i wuld never have built it.
If it would be possible to dump mem from time to time, one could display simple image (say red box), dump mem, and then simply find expected pattern in data, revealing framebuffer address (I assume it always has the same address).
Having to use external devices, when TV already has Linux running on an ARM CPU would be a pity.
Unfortunally i cant program in linux. Im trying to learn but my programming skills are very limited.
I just wish there was a way. And a guide to make it work =)
currently im thinking about the philiips hue system, which i could connect to the tv. but all depends on the possibility to grab the signal
- Official SamyGO Developer
- Posts: 179
- Joined: Sun Feb 21, 2010 3:18 pm
- Location: Poland
Still I need PC for send signal to Lightpack Control Device, but it's look great.
Here is my text about it - http://mods-kodi.pl/articles.php?article_id=27
I plan to make it work with Raspberry Pi oraz Android-Box.
Maybe it's possible to compile boblightd service from XBMC to our Samsung?
Source code here - https://code.google.com/p/boblight/wiki/boblightd
TV LCD: Samsung LE40B651T3W (CI) | Internet@TV | fw: 2005 (patched: SamyGO v0.24 + GMT2, ArFIX2, ADFIX) | matrix: SQ04
BluRay: Samsung BD-D5300-ZF | SamsungApps | fw: 1013
Android-Box: Zidoo X8 | Realtek RTD1295 64bit (QuadCore), Mali-T820 GPU, 2 GB RAM, HDMI IN record, Android 6.0 | ZDMC 17.1
my projects: Remote LAN Control - Desktop app (v0.8) | Signal checker for DVB-T (v0.3)