UE37C5100 don't turn on: standby led blink 6 times

This forum for information that related with C series hardware instead of firmware/software.
Post Reply

flitox113
Posts: 2
Joined: Fri Feb 23, 2018 9:15 pm

UE37C5100 don't turn on: standby led blink 6 times

Post by flitox113 » Fri Feb 23, 2018 9:24 pm

Hello

I've an Samsung LED UE37c5100
Main BN41-01549B

The TV don't turn on, the standby led blink 6 times .

I checked the power supply board is OK . All voltage
I checked all the voltage on the main board ( with service manual) are OK.

I think it's the EEPROM is corrupt. What is your idea?
I didn't find the firmware for this TV.
And with schematics i found there a lot of EEPROM's on this TV. Which the EEPROM for the powering ?

Thx
Last edited by flitox113 on Sat Feb 24, 2018 5:06 pm, edited 2 times in total.

flitox113
Posts: 2
Joined: Fri Feb 23, 2018 9:15 pm

Re: UE37C5100 don't turn on: standby led blink 6 times

Post by flitox113 » Sat Feb 24, 2018 8:12 am

I extracted eeprom files:

IC501 read at 24C256
IC502 Read at 24C02
IC901 - ATMLH038 (i tried to read at 24c01 and 24c02)

Can you say me if my eeprom dump are ok without faulty.

I tried to flash with dump from UE32c5100 , without changing only with IC502 with the new dump of ue32c5100 the when i plug the AC cable the standby led don't blink only after press on power button the led blink 6 times and no turning on.
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “[C] Hardware”