Help for exlink serial connection

angel75 · Post by **angel75** » Mon Jun 11, 2012 2:24 pm

Thanks, but always same problem "unknown device"...

lacibogi · Post by **lacibogi** » Mon Jun 11, 2012 4:35 pm

this driver worked for me..xp 32bit

https://www.dropbox.com/s/lv1bszbamfapl6u/pl-2303.zip

Post by **juusso** » Mon Jun 11, 2012 5:19 pm

As i re-installed my system last week, i used driver i posted for my x64 windows7 mashine. Might here are different drivers, duno.

angel75 · Post by **angel75** » Mon Jun 11, 2012 5:37 pm

nothing. I think it's a bad cable...maybe fake dku-5

Post by **greenhorn** » Mon Jun 11, 2012 8:45 pm

angel75> did you get the right wires from the DKU-5 cable... as shown in the wiki. Remember, colors probably will not be same (different producers).

Post by **juusso** » Tue Jun 12, 2012 8:41 am

Independent of bad wiring at the VGA part of cable, the cable itself MUST be recognized by PC (with right drivers installed).
I would try to check the drivers... If no success, then most probably your cable is wrong/damaged/broken.

After the PC is well with cable, next step could be proper wiring and signal from TV.

angel75 · Post by **angel75** » Sat Jun 16, 2012 12:05 am

greenhorn, could you post the ebay link of ca-42 or dku-5 cable that you have buyed? thanks

Post by **greenhorn** » Sun Jun 17, 2012 6:19 pm

This is the cable I have. I bought it from local dealer of china clones.

I do not think that ones in ebay are quite different from this one. Anyway it cost me about $3.

SamyGO

Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection

Re: Help for exlink serial connection