Page 7 of 7
Re: Help for exlink serial connection
Posted: Mon Jun 11, 2012 2:24 pm
by angel75
Thanks, but always same problem "unknown device"...
Re: Help for exlink serial connection
Posted: Mon Jun 11, 2012 4:35 pm
by lacibogi
Re: Help for exlink serial connection
Posted: Mon Jun 11, 2012 5:19 pm
by juusso
As i re-installed my system last week, i used driver i posted for my x64 windows7 mashine. Might here are different drivers, duno.
Re: Help for exlink serial connection
Posted: Mon Jun 11, 2012 5:37 pm
by angel75
nothing. I think it's a bad cable...maybe fake dku-5
Re: Help for exlink serial connection
Posted: Mon Jun 11, 2012 8:45 pm
by greenhorn
angel75> did you get the right wires from the DKU-5 cable... as shown in the wiki. Remember, colors probably will not be same (different producers).
Re: Help for exlink serial connection
Posted: Tue Jun 12, 2012 8:41 am
by juusso
Independent of bad wiring at the VGA part of cable, the cable itself MUST be recognized by PC (with right drivers installed).
I would try to check the drivers... If no success, then most probably your cable is wrong/damaged/broken.
After the PC is well with cable, next step could be proper wiring and signal from TV.
Re: Help for exlink serial connection
Posted: Sat Jun 16, 2012 12:05 am
by angel75
greenhorn, could you post the ebay link of ca-42 or dku-5 cable that you have buyed? thanks
Re: Help for exlink serial connection
Posted: Sun Jun 17, 2012 6:19 pm
by greenhorn
This is the cable I have. I bought it from local dealer of china clones.

I do not think that ones in ebay are quite different from this one. Anyway it cost me about $3.