Mainboard replace: c530/550 and c630 TO c650/c679, get PVR !

This forum for information that related with C series hardware instead of firmware/software.

User avatar
beatfreak
SamyGO Project Donor
Posts: 553
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by beatfreak » Sun Mar 24, 2013 10:14 am

ard/zdf/wdr..... mediathek is a smarthub abb and therefore available since D series, C has only internet@tv
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

TOMillr
SamyGO Project Donor
Posts: 179
Joined: Sat Sep 29, 2012 11:51 am

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by TOMillr » Sun Nov 03, 2013 7:55 pm

TOMillr wrote:Can anyone point me to a webstore or ebay buyer who still sells a replacement mainboard for upgrading my C6000?
Still wasn't able to get my hands on one of these mainboards. :-( Any alternative to get PVR function going - like a board from a C6500 maybe?

stratege0815
Posts: 5
Joined: Sat Nov 02, 2013 7:00 pm

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by stratege0815 » Tue Nov 05, 2013 1:50 pm

Hello,
if upgrading from c530 to c650 works (I give it a try) - do i need a different remote control?
BR
S

chipi
Posts: 13
Joined: Mon Nov 12, 2012 1:10 pm
Location: Hungary

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by chipi » Tue Jan 07, 2014 1:44 am

Can be replaced motherboard in c550?
To the right.

TOMillr
SamyGO Project Donor
Posts: 179
Joined: Sat Sep 29, 2012 11:51 am

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by TOMillr » Fri Jan 10, 2014 4:46 pm

I've just tried to replace the mainboard on my C6000 series tv with a new BN94-03406M board. While the replacement process was rather easy, the board doesn't seem to work properly:

When I power up the tv, the picture is all distorted (see attached picture). After a couple of seconds the tv then shuts down and reboots again. This circle continuos until I pull the power plug.

Any idea what's going on here?

Image

User avatar
juusso
SamyGO Moderator
Posts: 9775
Joined: Sun Mar 07, 2010 6:20 pm

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by juusso » Fri Jan 10, 2014 5:01 pm

is here any output on Exlink cable? Like hardware incompatibility. Try to reset EEPROM, maybe it stuck on values for C6000
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

TOMillr
SamyGO Project Donor
Posts: 179
Joined: Sat Sep 29, 2012 11:51 am

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by TOMillr » Fri Jan 10, 2014 5:26 pm

Sorry, I'm not familiar with this "exlink cable" you've mentioned. Do you have a link I can have a look at to get some more informations?

User avatar
juusso
SamyGO Moderator
Posts: 9775
Joined: Sun Mar 07, 2010 6:20 pm

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by juusso » Fri Jan 10, 2014 5:36 pm

juuso wrote:Try to reset EEPROM, maybe it stuck on values for C6000
http://wiki.samygo.tv/index.php5/UnBric ... OM_chip.3F
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

TOMillr
SamyGO Project Donor
Posts: 179
Joined: Sat Sep 29, 2012 11:51 am

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by TOMillr » Fri Jan 10, 2014 5:44 pm

Hm, so I have to solder a wire onto the two pins of the EEPROM to reset the chip? Or is there another way to do this?

Before I do that, I'd like to make sure that the board itself is working properly. The BN94-03406M board is a replacement part for a UE40C6700 tv. Should that one work with my UE46C6000?

I also don't understand how some C6000 values should have made it's way to the EEPROM on the new C6700 board.

User avatar
juusso
SamyGO Moderator
Posts: 9775
Joined: Sun Mar 07, 2010 6:20 pm

Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P

Post by juusso » Fri Jan 10, 2014 5:49 pm

TOMillr wrote:I also don't understand how some C6000 values should have made it's way to the EEPROM on the new C6700 board.
My fault, it isn`t. I was thinking something else.

But anyway, eeprom reset may help in this situation. You don`t need to solder anything, it is enough to make short circuit with some metalic toy at the boot time of tv.
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[C] Hardware”