Page 10 of 10

Re: Bricked TV after using FFB

Posted: Sun Jan 17, 2016 11:20 am
by juusso
Yes, sure. If you have putty, working cable and you can connect to tv`s console and perform commands, then tv will survive. Just please. Be slow.

Re: Bricked TV after using FFB

Posted: Sun Jan 17, 2016 11:28 am
by muhozol
Yes i have working cable, i can connect to tv console, i can get in but i need more help step by step what i need to check/ to do. I need help with this commands in console :(

Re: Bricked TV after using FFB

Posted: Sun Jan 17, 2016 11:42 am
by juusso
needed to understand what`s wrong. Pls connect empty fat 32 usb to tv.
1. reboot tv
2. connect via putty to console
3. perform command

Code: Select all

mount | grep "usb"
4. post here what you get

p.s. i need boot log from TV start

Re: Bricked TV after using FFB

Posted: Sun Jan 17, 2016 11:54 am
by muhozol

Code: Select all

>> ONBOOT :: 0x59a50219 0x12821282
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)

[28_64_512] Linux version 2.6.18_SELP-ARM (ksh921@sp) (gcc version 4.2.0 20070514 (GPL2) (SELP 4.2.0-3.0.5.custom 2007-10-31(14:53))) #81 PREEMPT Mon Jun 22 10:10:31 KST 2009
================================================================================
 SAMSUNG: v2.6.18_SELP_3.X_GA_bayhill+/A1(P24)
         (Detailed Information: /sys/selp/vd/lspinfo/summary)
================================================================================
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) is freed !!!
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)

[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) is freed !!!
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)

init started:  SELP-BusyBox(GPL2) v1.2.2-Samsung.Common.Linux (2008.12.24-18:59+0000) multi-call binary
Starting pid 24, console /dev/ttyS1: '/etc/rcS'
/etc/rc.local start!!!!
Starting pid 32, console /dev/ttyS1: '/bin/sh'
-sh: id: not found

Re: Bricked TV after using FFB

Posted: Sun Jan 17, 2016 11:57 am
by juusso
Ok, TV repaired via ExLInk cable according info on http://wiki.samygo.tv/index.php5?title= ... ked_Device

Cheers :)

Re: Bricked TV after using FFB

Posted: Sun Jan 17, 2016 3:18 pm
by muhozol
Thanks for Juusso wich "was" today at my home and fixed my old TV :)