Enable SamyGo on LE40B656?

[juusso]

hellacopters
Feel free to use FFBv0.4 and related files to restore from this manual.
Your TV is fully compatible.

[juusso]

i removed link with debug.log. could you please post it again?

[juusso]

If you look closer at dumpmaker.log:

Code: Select all

'MicomCtrl 23' done.
!!!exeDSP killed!!!
====================Script start====================
 
[02:08:38] USB found: /dtv/usb/sda1
[02:08:38] START dump bml0/1
[02:08:44] End
[02:08:44] START dump bml0/2
[02:08:51] End
[02:08:51] START dump bml0/3
[02:08:57] End
[02:08:57] START dump bml0/4
[02:09:03] End
[02:09:03] START dump bml0/5
[02:14:06] End
[02:14:06] START dump bml0/6
[02:20:22] End
[02:20:22] START dump bml0/7
[02:23:29] End
[02:23:29] START dump bml0/8
[04:08:34] End
[04:08:34] START dump bml0/9
[05:25:39] End
[05:25:39] START dump bml0/10
[07:10:37] End
[07:10:38] START dump bml0/11
[08:28:23] End
[08:28:23] START dump stl0/12
[12:43:13] End
[12:43:13] START dump stl0/13 

You`ll see, you brake it`s job and not all dumps were made. You brake it on dump of stl0/13...and this dump is to delete from your collection.
Here are dumps stl0/13-17 to dump on your TV. And just after TV should reboot.

I think everything is quite normal. You have all dumps you require if TV is bricked (bml0/1-bml0/7), so you can start play with FFB.
Next time (you can do it after downgrading your firmware) wait until TV reboots. One of users reported 1h30 min until all dumps were made. You had patience just 10 minutes

[juusso]

anyway i think you can use ffb.

Here was some trouble to dump stl13. did you run Dumper from USB or TV memory?
you can try run it again if you want.