Hi,
I've recently bought a new D6530, and im testing some 3d content..
I cannot seem to get the 3d working through the PC input, I have SBS content 1080p (some IMAX movie..), and when i play it on the TV from the PC input (i have my pc connected to the tv via THE d-sub cable) i cannot activate the 3d option for SBS ... its simply grayed out.
When I try to play this same file through DNLA, i can see the thumbnail for the file, but when i try to play it, it says video codec not supported;(
Any ideas?
Playing 3D content not possible - PC input
Re: Playing 3D content not possible - PC input
You can't play back 3D content through VGA. You have to connect your PC using DVI/HDMI.
Re: Playing 3D content not possible - PC input
Yeah, i decided to check the e-manual and it seems that you are correct.
Although I cannot seem to play it through DNLA or USB as well.
Keeps saying video codec not supported. It plays fine in kmplayer for example
Here is some media info:
I tried replacing the audio file with AAC and it keeps saying the same.
If i try to re-encode the video to another AVC profile, would the 3d break?
Although I cannot seem to play it through DNLA or USB as well.
Keeps saying video codec not supported. It plays fine in kmplayer for example
Here is some media info:
Code: Select all
General
Complete name : I:\DL\IMAX-Deep-Sea-3D-1080p-Half-SBS-AC3\IMAX Deep Sea 3D 1080p Half-SBS AC3.mkv
Format : Matroska
File size : 1.94 GiB
Duration : 40mn 49s
Overall bit rate : 6 819 Kbps
Writing application : Lavf51.12.1
Writing library : Lavf51.12.1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Baseline@L1.3
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Muxing mode : Container profile=Unknown@1.3
Codec ID : V_MPEG4/ISO/AVC
Duration : 40mn 47s
Bit rate : 6 619 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 47.952 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.067
Stream size : 1.89 GiB (97%)
Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 40mn 49s
Bit rate mode : Constant
Bit rate : 64.0 Kbps
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 44.1 KHz
Resolution : 16 bits
Stream size : 18.7 MiB (1%)
If i try to re-encode the video to another AVC profile, would the 3d break?
Re: Playing 3D content not possible - PC input
I think that's the problem, the file was incorrectly encoded, for some reason the person who did it used a framerate that's double of what it should be, which is stupid... and current embedded devices usually can't decode more than 30fps in 1920x1080 resolution.ailiev wrote:Code: Select all
Frame rate : 47.952 fps
No, SBS is pretty simple, the TV just takes the first half of the video image for the left eye and the second half for the right eye. So as long as you don't start cropping and uncentering the split there's no problemailiev wrote:If i try to re-encode the video to another AVC profile, would the 3d break?