Call for mips testers D55xx/D57xx/D69xx

General Forum for talking area for D series TVs.

zoelechat
SamyGO Moderator
Posts: 7930
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Call for mips testers D55xx/D57xx/D69xx

Post by zoelechat » Wed Aug 12, 2015 5:20 pm

You don't need to compile anything, every archive already contains binary in out- folder :)
I do NOT receive any PM. Please use forum.

teodorgly
Posts: 6
Joined: Tue Aug 11, 2015 6:24 pm

Re: Call for mips testers D55xx/D57xx/D69xx

Post by teodorgly » Wed Aug 12, 2015 6:46 pm

So yeah, i noticed this... All patches work, so nice job.I would want to make my own patch any resources forward this?

zoelechat
SamyGO Moderator
Posts: 7930
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Call for mips testers D55xx/D57xx/D69xx

Post by zoelechat » Wed Aug 12, 2015 7:11 pm

teodorgly wrote:any resources forward this?
No. You have sources as examples, you need IDA and decompiler to reverse your exeDSP, some toolchain and hundreds hours. Done. :)
I do NOT receive any PM. Please use forum.

pauliini
Posts: 5
Joined: Thu Aug 13, 2015 8:30 am

Re: Call for mips testers D55xx/D57xx/D69xx

Post by pauliini » Thu Aug 13, 2015 4:47 pm

Hello!

I have dead UE40D5700 (mainboard paperlabel say UE40D5707 974B, MAIN 1018,1 SUB 1003.

I updated MAIN to 1027 bay USB method and after that remote control not working propely, I cannot stop TV any more by remote.

So I go to service menu and ofcource do many thinks not to allowed and after I start Micom upgrade prosess ( I see wait...) Nothing
happend long time and I have to disconnet power supply (230V). After that TV is totally dead. Red LED is not working when I put power
plug on.

PSU is OK, I disconnect cable from PSU to mainboard and backlight is OK, all voltage are OK. I read many many chains in this forum and
need help to unbrick my TV. I undestand that you are expert with that. I plan to buy following Arduido to chech and maybe unbrick my TV.

I need some detailed help, connection help an so on, pictures are wellcome, I am electrician but these elektronics is not so familiar for me.

http://www.ebay.com/itm/Ethernet-Shield ... 5d371d6fd7

I did not find any shematic for that TV, only PSU shematic founded from Elektrotanya. I do not so what is Micom eeprom but I thing is 8 pins
IC S24CSO near to Weltrend IC. Some picture follows.

Is it time waste to try to reset Micom eeprom or not, what is best plan to go to unbrick tv so I am pleased to in your test team after that.
You do not have the required permissions to view the files attached to this post.

steef84
SamyGO Project Donor
Posts: 63
Joined: Mon Dec 12, 2011 3:53 am
Location: Holland

Re: Call for mips testers D55xx/D57xx/D69xx

Post by steef84 » Fri Aug 14, 2015 4:54 pm

Just if interrested : I own a UE40D5700 with T-MST5DEUC-1025.0. Willing to test if needed ....
UE32F4510 T-MST12DEUC-1118.4 using donor root downgraded to 1112.2 ;) + oscam
UE40D5700 T-MST5DEUC-1025.0 using public root RIP
UE40H6240 T-MST14DEUC 2130 using donor root + oscam
UE55J6240 T-HKMFDEUC-1470.3 no root

sectroyer
Official SamyGO Developer
Posts: 5665
Joined: Wed May 04, 2011 5:10 pm

Re: Call for mips testers D55xx/D57xx/D69xx

Post by sectroyer » Fri Aug 14, 2015 11:21 pm

steef84 wrote:Just if interrested : I own a UE40D5700 with T-MST5DEUC-1025.0. Willing to test if needed ....
Good, very good :) Did you try MIPS patches from public forum ?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

mark21
Posts: 42
Joined: Fri Sep 23, 2011 8:25 pm

Re: Call for mips testers D55xx/D57xx/D69xx

Post by mark21 » Sat Sep 12, 2015 9:36 pm

i also have MST.., i can help if you want me..


My TV: 37UED5700, with firmware T-MST5DEUC-1009.1

sectroyer
Official SamyGO Developer
Posts: 5665
Joined: Wed May 04, 2011 5:10 pm

Re: Call for mips testers D55xx/D57xx/D69xx

Post by sectroyer » Sat Sep 12, 2015 9:57 pm

mark21 wrote:i also have MST.., i can help if you want me..


My TV: 37UED5700, with firmware T-MST5DEUC-1009.1
Yeah welcome :) Did you try already released patches ? Please also check ARM D patches if you want some I can port to MST/MIPS :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

bdwbasti
Posts: 4
Joined: Tue Jun 03, 2014 11:29 am

Re: Call for mips testers D55xx/D57xx/D69xx

Post by bdwbasti » Mon Sep 14, 2015 6:30 pm

Hi,

i have a UE46D5700. Requires you still Tester ?

BG
Basti
Samsung UE46D5700

sectroyer
Official SamyGO Developer
Posts: 5665
Joined: Wed May 04, 2011 5:10 pm

Re: Call for mips testers D55xx/D57xx/D69xx

Post by sectroyer » Mon Sep 14, 2015 9:37 pm

bdwbasti wrote:Hi,

i have a UE46D5700. Requires you still Tester ?

BG
Basti
Of course :) MST testers are ALWAYS welcomed :) Did you try patches that we already released in D MIPS section ? :) That's first thing worth checking. Next check D ARM. Thanks to previous work it is now possible to port (almost) ANY D ARM patch to D MIPS. We just need your feedback what you want ? :D
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Post Reply

Return to “[D] General”