I tried to reset the EEPROM with cable as described on wiki but TV will not power on. No light.
I found the service manual which describe this
4-7-2. Sub S/W (in Factory mode)
If you don't have DDC Manager, Use this method.
1. Into the Factory Mode.
2. Select "SVC". (Use r button.)
3. Select "MICOM UPGRADE off". (use r button.)
4. If message change from "off" to "wait", TV is upgrading Sub S/W. (It takes about 5 min.)
5. If update completes, TV set will booting automatically.
This is the mode I set the TV in. And I was stupid to shut down the TV.
What does Sub S/W mode mean?
Here's picture from service manual.
https://drive.google.com/file/d/0B5n_DC ... sp=sharing
Afterwards comes the first text as I posted 4-7-2. Sub S/W (in Factory mode).....
There's very hard to get a motherboard like this bn41-01666b
Thanks if anyone can help me out.
Motherboard looks close to mine,
"With help of programmators like postal2/rt809f and other it is enough to connect TV via VGA (or D_SUB if you like). The pinout is: GND-10, SDA-12, SCL-15. Even HDMI is ok for this goal. TV must be in standby mode to have power on all required chips."
Says TV must be in standby mode to have all power.. Problem is the TV is probably not in standby mode since it is not powering up light.
But the processor gets little warm although like it should when TV is on.