Bricked My UE465005 by Micom Factory Mode Upgrade

Here is information about customize your D series firmware..:!:This forum is NOT FOR USER questions or problems but DEVELOPER.
Post Reply

frudda
Posts: 4
Joined: Sun Sep 11, 2016 8:34 pm

Bricked My UE465005 by Micom Factory Mode Upgrade

Post by frudda »

Hey I know it happend to alot of people now it happend to me.
I tried to reset the EEPROM with cable as described on wiki but TV will not power on. No light.
I found the service manual which describe this

4-7-2. Sub S/W (in Factory mode)
If you don't have DDC Manager, Use this method.
1. Into the Factory Mode.
2. Select "SVC". (Use r button.)
3. Select "MICOM UPGRADE off". (use r button.)
4. If message change from "off" to "wait", TV is upgrading Sub S/W. (It takes about 5 min.)
5. If update completes, TV set will booting automatically.

This is the mode I set the TV in. And I was stupid to shut down the TV.
What does Sub S/W mode mean?

Here's picture from service manual.
https://drive.google.com/file/d/0B5n_DC ... sp=sharing

Afterwards comes the first text as I posted 4-7-2. Sub S/W (in Factory mode).....

There's very hard to get a motherboard like this bn41-01666b

Thanks if anyone can help me out.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Bricked My UE465005 by Micom Factory Mode Upgrade

Post by juusso »

Rt809f isp programmer+ micom firmware (possible to get... but only if you have programmer...) = tv survive.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
frudda
Posts: 4
Joined: Sun Sep 11, 2016 8:34 pm

Re: Bricked My UE465005 by Micom Factory Mode Upgrade

Post by frudda »

nice, so a clean flash will resolve it as if I get the Rt809f isp programmer? and the firmware
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: Bricked My UE465005 by Micom Factory Mode Upgrade

Post by zoelechat »

More details and almost everything we know here
I do NOT receive any PM. Please use forum.
frudda
Posts: 4
Joined: Sun Sep 11, 2016 8:34 pm

Re: Bricked My UE465005 by Micom Factory Mode Upgrade

Post by frudda »

Found this firmware
UE32D5500_WT61P805.bin
Motherboard looks close to mine,
frudda
Posts: 4
Joined: Sun Sep 11, 2016 8:34 pm

Re: Bricked My UE465005 by Micom Factory Mode Upgrade

Post by frudda »

Found this information in the link you posted

"With help of programmators like postal2/rt809f and other it is enough to connect TV via VGA (or D_SUB if you like). The pinout is: GND-10, SDA-12, SCL-15. Even HDMI is ok for this goal. TV must be in standby mode to have power on all required chips."

Says TV must be in standby mode to have all power.. Problem is the TV is probably not in standby mode since it is not powering up light.
But the processor gets little warm although like it should when TV is on.
mufon007
Posts: 1
Joined: Mon Jul 17, 2017 4:22 pm

Re: Bricked My UE465005 by Micom Factory Mode Upgrade

Post by mufon007 »

Hello Frudda, have you been able to resolve your issue, I too have the same problem - bad micom upgrade. I desperately need to recover my TV. Any help, i would greatly appreciate.

Post Reply

Return to “[D] Firmware”