UE40D5520RW brick

This forum is for information related with D series hardware.
Post Reply

Bender
Posts: 1
Joined: Mon Mar 16, 2015 12:14 pm

UE40D5520RW brick

Post by Bender » Mon Mar 16, 2015 1:43 pm

Hello. TV UE40D5520RW (prehistory unknown). When plugged in constantly reboots. Go to the service menu and make reset impossible. Eeprom reset does not work. Log terminal:
SpoilerShow
Switch to Earphone UART
SEC

Switch to Micom UART


=================================
onboot (Feb 25 2011 - 16:08:03)
release ver : 1002 - RELEASE
etc :
=================================

Onboot X6 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 3538944 byte
Jump Kernel....

auth success by h/w sha1 UART1 is used to UART or logic mode.
If you modify the eeprom dump micom, the terminal once issued:
SpoilerShow
=================================
onboot (Feb 25 2011 - 16:08:03)
release ver : 1002 - RELEASE
etc :
=================================

Onboot X6 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 3538944 byte
Jump Kernel....

auth success by h/w sha1 UART1 is used to debug mode.
[SELP] preset_lpj manual setting 894976
================================================================================
SAMSUNG Mstar Kernel
Version : 1003_192 RELEASE
================================================================================
init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04:20 KST)
starting pid 26, tty '': '/etc/rc.local'
/etc/rc.local start!!!!
=====================================================
ROOTFS VERSION : "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE"
===========##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill
==========================================
mount: mounting devpts on /dev/pts failed: No such device
starting pid 37, tty '': '/bin/cttyhack -/bin/sh'
/etc/profile start!!
====================================================================
[SELP] fsr module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] fsr_stl module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_glue module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_fat module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
"Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE"
+ otp lock check
OTP INFO : First Block OTP is Locked.
OTP INFO : OTP Block is not Locked.
mount mtd_rwarea
mount mtd_exe
mount mtd_rocommon
mount mtd_rocommons
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
====================================================================
[SELP] samsung_mstar module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
Run FastLogo...
====================================================================
[SELP] FastLogo module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
mallopt(M_MMAP_THRESHOLD) success!
[FASTBOOT] Main thread id: 54
##### System Execution!!! ##### [1970]
Running Parallel FASTBOOT
MMAP: E_MMAP_256MB_256MB
startaddr = 4630000, alignment = 0, size= 4e0000
startaddr = 7890000, alignment = 0, size= 4000
startaddr = 78b4000, alignment = 0, size= 7800000
startaddr = f0b4000, alignment = 0, size= 10000
startaddr = f0c4000, alignment = 0, size= 6a8000
startaddr = f76d400, alignment = 400, size= 760e20
startaddr = 5310000, alignment = 0, size= 380000
startaddr = 20000000, alignment = 0, size= 2800000
startaddr = 22800000, alignment = 0, size= 1400000
startaddr = 23c00000, alignment _mod_sys_open.236 ioctl
= 0, size= 200000
---------------------------------------------
SdCommon_GpioInit()
---------------------------------------------
DRAM SIZE 512M
SDAL - 05.35.00.00
Init PWM2
Init PWM4
GOP FB:22800000
GOP2 FB:78b4000
the length of the thread name exceeds 15, it will be truncated to_mod_sys_open.236 ioctl
15 chars
------------------[SdCommon_IicInit][969]
[HAL_DSCMB_SetBank][82] Set bank 0x2b13e000
u32PhyBufAddr = 04640100, u32PhyBufSize = 000cff00
u32VirBufAddr = 2b1ce100, u32VirBufSize = 000cff00


NonPmBase = 0x2b13e000, NonPmBankSize = 0x80000



PmBase = 0x2aebe000,_mod_sys_open.236 ioctl
PmBankSize =_mod_sys_release.243 ioctl
0x280000



CODE_ADDR_NCACHE = 0x2b1be000, CODE_ADDR = 0x4630000

pm_aes_fw:
Thrd(720098512) SEND OUT: ac00
Thrd(720098512) RESPONSE: 7468
pTest: 00 00 64 04

SDAL version : SDAL - 05.35.00.00


>>> TDBuilder::Build start
[SdMisc_DisplayResolution 591]
------------------[SdCommon_IicInit][969]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x06f96d18]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x06f97790]
<<< TDBuilder::Build End
MApi_PVR_Init_AESDMA
MApi_PVR_Init_AESDMA
ResetSystemConfig tuner
############## Find Factory_Part1.dat File in mtd_exe ##################
############## Find Factory_Part2.dat File in mtd_exe ##################

FixedId : Nvram[41] vs File[41]

WBId : Nvram[600] vs File[600]

WB ADC(Part1) Id : Nvram[40] vs File[40]

EER Basic Id : Nvram[52] vs File[52]

EERId Custom : Nvram[664] vs File[664]

FACId : Nvram[49] vs File[49]
[FastBoot][Error] Missmatch Tuner type[Int] & Auto Store Type[Never]
LightSensorMonitor Creat...Start Brightness Step = [20]
[LightSensorMonitor] Start !
ID_SELECT_LCD PDP:LCD,GPIO_LCD_PDP SEL:LCD
Called...withDB
=========1 Tuner Selected !!!
TUNER Init
address:2b13e000 80000
address:2aebe000 280000
MApi_DMX_GetLibVer 00318138
>Load Code... OGA T9
DVB-T Load DSP Code OK
@@Enter DVB-T DEMOD_ENTRY
@@Exit DVB-T DEMOD_ENTRY

>>[ERR:TDsNTP7411AudioAmp.cpp] t_WriteReg():1276 ???? Addr = 0x02, Data = 0x01 Write fails
???? Check Factory, Num of Amp is 1.
DSPBinBaseAddress = 0x0
DSPMadBaseBufferAdr = 0xf16c000
HAL_AUDIO_SetPowerOn(1)
======> Audio R2 Base : f16c000
Data Transferred to Store...[384]!!!
Data Transferred to ScreenObject...[384]!!!
[PVRSSFactory::Build(),LINE:82 ]
MDrv_WBLE_EnableBLE(): invoking Hal_WBLE_set_ble()
Checking PQ bin in /mtd_rwarea/...
/mtd_rwarea/X6_Main.bin is not exist!!
Checking PQ bin in /mtd_exe/pqbin/...
/mtd_exe/pqbin/X6_Main.bin is not exist!!
Checking PQ bin in /mnt/pqbin/...
/mnt/pqbin/X6_Main.bin is not exist!!
!!!!!PQ bin is not exist, use C files!!!!!

=======================================
[PQ File] version info:
X6_Main_0000000000000216 ver
X6_Sub_0000000000000018 ver
X6_Main_Ex_0000000000000012 ver
X6_Sub_Ex_0000000000000003 ver
=======================================

~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/PLDAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/SSDAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_RestoreFactoryFromFile():549 /mtd_rwarea/FADAT_Clone File open error !
Crop win invalid!!
Disp win invalid!!
MApi_XC_SetWindow failed because of InitData wrong, please update header file and compile again
[TDaSystem::PrimePivotModeConfig] PivotConfig Size [1920 * 1080], Mode [3]
DSP code loaded successfully

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/PLDAT_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/SSDAT_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FastLogoInfo_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FADAT_Clone do not exist!!
[TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0]
>>[ERR:TDcGraphicScaler.cpp] t_GraphicGet():1221 [G-Main]Read fail Drv Data
[TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0]
=== kochien SRS_SetTSHD ===

=== invalid auto volume mode ===
the length of the thread name exceeds 15, it will be truncated to 15 chars
then again bootloop with a shorter Logue (in eeprom micom again recorded the original values)
eeprom (micom) source:
00000000: FF FF FF FF CD 01 FF 01 FF 45.......
eeprom (micom) modified:
00000000: FF FF FF FF 77 00 FF 01 FF 45.......
SoC eeprom:
backup_SoC.rar
How to revive TV (As a result of the full log)?

sorry for google translation
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “[D] Hardware”