oscam on D6500(without descrambling)

Here for general support for D series TVs, request and problem solve area.

setti
SamyGO Project Donor
Posts: 70
Joined: Sat Jan 07, 2012 11:32 am

Re: oscam on D6500(without descrambling)

Post by setti » Fri Oct 10, 2014 9:46 pm

i guess, you are not that kind of open source guy, that would share his expirience and tell me, what the D series equivalents are?

sectroyer
Official SamyGO Developer
Posts: 5608
Joined: Wed May 04, 2011 5:10 pm

Re: oscam on D6500(without descrambling)

Post by sectroyer » Fri Oct 10, 2014 10:31 pm

setti wrote:i guess, you are not that kind of open source guy, that would share his expirience and tell me, what the D series equivalents are?
Everything you need you already described here:
viewtopic.php?f=21&t=7046&start=20#p63792
I don't know what else can I say :) Just patch one string to another. The last param is just not used :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

setti
SamyGO Project Donor
Posts: 70
Joined: Sat Jan 07, 2012 11:32 am

Re: oscam on D6500(without descrambling)

Post by setti » Sat Oct 11, 2014 12:52 am

hello, yeah. you are right. i was just blind :D
It works! fantastic!

sectroyer
Official SamyGO Developer
Posts: 5608
Joined: Wed May 04, 2011 5:10 pm

Re: oscam on D6500(without descrambling)

Post by sectroyer » Sat Oct 11, 2014 1:04 am

What "works"? Descrambling?:)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

setti
SamyGO Project Donor
Posts: 70
Joined: Sat Jan 07, 2012 11:32 am

Re: oscam on D6500(without descrambling)

Post by setti » Sat Oct 11, 2014 1:17 am

yep. without descrambling IT wouldnt make much sense. :-)
wasnt that easy,....

sectroyer
Official SamyGO Developer
Posts: 5608
Joined: Wed May 04, 2011 5:10 pm

Re: oscam on D6500(without descrambling)

Post by sectroyer » Sat Oct 11, 2014 10:03 am

setti wrote:yep. without descrambling IT wouldnt make much sense. :-)
wasn't that easy,....
Glad I could help :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

setti
SamyGO Project Donor
Posts: 70
Joined: Sat Jan 07, 2012 11:32 am

Re: oscam on D6500(without descrambling)

Post by setti » Sat Oct 11, 2014 10:30 am

Sorry, but which help? I only see closed source egoists in oscam @samygo. I dont mean the whole samygo project at all, but the oscam part (i know oscam isnt part of samygo, but..... you know)

User avatar
juusso
SamyGO Moderator
Posts: 9560
Joined: Sun Mar 07, 2010 6:20 pm

Re: oscam on D6500(without descrambling)

Post by juusso » Sat Oct 11, 2014 10:42 am

don`t feel offended please. Personally i don`t see any other reason to build oscam support on D series or E/F mst than lack of interest from developers. Also lack of test-devices. None can push devels to do if they won`t do.

As @bugficks decided to don`t share sourcecode of his lib, this means lib is closed source and we have to respect his decision. But people can always start their own projects and maybe one will have luck. I don`t think that changing strings in binary is correct way. Believe me, the liboscam functions were checked on other devices which don`t have support atm and current way did not work. I personally checked it on my D series. So liboscam on D arm/mstar, E/F mstar is completelly new project and the whole investigation should be started from scratch.

Irony from devels come because they are overtired, they spend whole days in blackouted rooms in front of their monitors and they`re intoxicated by a lot of cofee, which keeps they awake during the days and nights. Keping in mind above mentioned, please kindly be lenient when you see something not very politely written, they just know the c++, python, delphi and many other coding languages and how to use them correctly :)
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

sectroyer
Official SamyGO Developer
Posts: 5608
Joined: Wed May 04, 2011 5:10 pm

Re: oscam on D6500(without descrambling)

Post by sectroyer » Sat Oct 11, 2014 10:58 am

setti wrote:Sorry, but which help? I only see closed source egoists in oscam @samygo. I don't mean the whole samygo project at all, but the oscam part (i know oscam isnt part of samygo, but..... you know)
Source code for oscam has bugficks and ONLY bugficks :) I am in the same position as you are. Also I don't own D so I don't know what is "missing"... Besides not having source code is not always an issue... We don't have the source code or samsung binaries and we manage to do what we can... Besides I (and even bugficks) not long ago didn't know "anything" about reversing we had to start "from scratch" ;)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Schischu
SamyGO Project Donor
Posts: 3
Joined: Mon Apr 22, 2013 8:36 pm

Re: oscam on D6500(without descrambling)

Post by Schischu » Thu Oct 16, 2014 11:03 pm

Hm so I started my own liboscam implementation:

Code: Select all

dlsym _ZN13CViewerNormal10t_SetSleepEv found -> E
SamyGO OSCAM v0.3.1
* D Series - (null) *
[OSCAM] oscam available = 0
[OSCAM] oscam.config: pmt_mode = 0
[OSCAM] spI_GetPrintLevel [0x410f5fd8].
[OSCAM] spI_SetPrintLevel [0x410f6c7c].
[33mPrintLevel: 40000000 (1073741824)
[0m[33mPrintLevel: 40000001 (1073741825)
[0m[OSCAM] gSdPrintMask [0x5b25324].
[33mSdPrintLevel: 0000 (0)
[0m[33mSdPrintLevel: 8000 (32768)
[0m[31m[OSCAM] dlsym '_ZN9TCChannel14ScrambledInPMTEv' failed.
[0m[OSCAM] _ZN18CViewerWrapperReal16GetScrambledFlagEv [0xb97e24].
[OSCAM] _ZN13CPVRSIManager27getCurrentLiveProgramNumberEv [0x211c77c].
[OSCAM] uldTsd_AllocateDemuxTypeCw [0x412a1eb0].
[OSCAM] uldTsd_DellocateDemuxTypeCw [0x412a1f08].
[OSCAM] lldTsDmxSetCaModeOfBankMode [0x4129bc1c].
[OSCAM] lldTsDmxSetCaModeOfSlotMode [0x4129c5ac].
[OSCAM] lldTsDmxConnectCa2Bank [0x4129b9b0].
[OSCAM] lldTsDmxEnableCaEngineOfBankMode [0x4129b7e4].
[OSCAM] lldTsDmxEnableCaEngineOfSlotMode [0x4129b8cc].
[OSCAM] lldTsDmxSetPidFilterCaType [0x412a0688].
[31m[OSCAM] dlsym 'lldTsDmxSetDvbCsaKey' failed.
[0m[OSCAM] Use own lldTsDmxSetDvbCsaKey.
[0m[OSCAM] REG_WRITE32_8 [0x411ee2dc].
[OSCAM] uldTsd_SetPidFilterCaType [0x412a3aa8].
[OSCAM] uldTsd_SetCaMode [0x412a3cec].
[OSCAM] uldTsd_EnableCaEngine [0x411b6b1c].
[OSCAM] spITsd_SlotGetPid [0x411ab6dc].
Starting PMT Server mode: 0.
Starting DMX Server.
Started DMX Server.
Starting CA Server.
CA Client 9000 connected
CA Client 9001 connected
CA Client 9002 connected
CA Client 9003 connected
Started CA Server.
[OSCAM] spITsd_SlotExtractData [0x411acc44].
Hooking function 0x0x411acc44 with 0x0x86e4b3b0
[OSCAM] _Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj [0xb2d3f0].
Hooking function 0x0xb2d3f0 with 0x0x86e4ab10
[31m[OSCAM] dlsym '_Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj12SdMainChip_k' failed.
[0m[OSCAM] _Z20SdTSData_StopMonitorjj [0xb30498].
Hooking function 0x0xb30498 with 0x0x86e4ad80
[31m[OSCAM] dlsym '_Z20SdTSData_StopMonitorjj12SdMainChip_k' failed.
[0m[OSCAM] _ZN12TCWindowBase12m_SetChannelEPK9TCChannelii [0xc2a828].
Hooking function 0x0xc2a828 with 0x0x86e4aed0
[OSCAM] init done...

Code: Select all

~~[SSKI] [KeyInputBase.cpp] t_Main, 0x0 0x10 0x0 0x0 0x0 0x0
~~[SSKI] [KeyCommon.cpp] SendKeyPressInput, Code(16) type(-3)
~~[SSKI] [KeyInputBase.cpp] t_ProcessKeyValue, RC Key Code [0x0010]
[PVRCore/Fatal] 438 : [CPVRCoreApp::BeforeTuneProc:1770] appState 0
[PVRCore/Fatal] 439 : [CPVRCoreApp::BeforeTuneProc:1796] updatedState 0
[36mintTCWindowBase__SetChannel -> TCh: 0x0x73fd4c8 PrNr: 0x6ca73bd0 a3: 9 a4: 0
[0m[PVRSIMGR/Fatal] 440 : [CPVRSIManager::getCurrentLiveProgramNumber][694] Created Window : 0 !!
[PVRSIMGR/Fatal] 441 : [CPVRSIManager::getCurrentLiveProgramNumber][701] programNumber = 241
[33mintTCWindowBase__SetChannel -> ChPrNr:  241 ChScr: 1 Changed: 1
[0m[36mintTCWindowBase__SetChannel <- 1
[0m[InstallResourceRequestCallback][805]
[1413496032:403743][DEBUG][InstallResourceRequestCallback][806] 
@@@[SSSO SOURCE_TYPE_DTV1] [SsSourceBase.cpp] ControlAudioClip, ControlType[1]
[TDScaler][VidId:0][544] (Mute OnOff:1)
[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 59
[0m[36mintSdTSData__StopMonitor <- 0
[0m~~[SSCI][ITPCCim.cpp] CloseDescrambler, Call...
~~[SSCI][ITPCCim.cpp] ~CCKeysCleaner, Call..

~~[Sub System Error] ITPCCim.cpp:CloseDescrambler():828 state error CP0[0], CP1[0]

[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 60
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 45
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 55
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 52
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 53
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 46
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 56
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 57
[0m~~[SSKI] [KeyInputBase.cpp] t_Main, 0x0 0x10 0x0 0x0 0x0 0x0
~~[SSKI] [KeyCommon.cpp] t_OkayToSend, false!! #5 repeat : 0x1
~~[SSKI] [KeyInputBase.cpp] t_ProcessKeyValue, TDcMicomInterface::KEY_TYPE_RC : 0 16 0 0 0 0
[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 61
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 62
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 63
[0m[36mintSdTSData__StopMonitor <- 0
[0m[bandSwitchFrequency:11700000][uiFrequency:11719000][lnb_hi_osc:10600000]
DiSEqCStatus.Tone22khz:2
DiSEqCStatus.bCableCompensation:0
DiSEqCStatus.Polarisation:0
DiSEqCStatus.SelectSwitchInput:18
DiSEqCStatus.posCommand:9
DiSEqCStatus.posParameter:1
DiSEqCStatus.UsePositioner:0
		[1;34;40m[TCS TUNER][System:4][CurrentFreq: 1119000][CenterFreq :11719000][Symbol:27500000][BW:8,QAM:64][ASystem:0] [0m 
LNB Power 18V
Polarisation:0,bCableCompensation:0
~~[SSKI] [KeyInputBase.cpp] t_Main, 0x5 0x4d 0x1 0x0 0x0 0x0
~~[SSKI] [KeyCommon.cpp] SendKeyReleaseInput, SendKeyReleaseInput() type(-4)
~~[SSKI] [KeyInputBase.cpp] t_ProcessKeyValue, ########## TDcMicomInterface::KEY_TYPE_RELEASE #############
[ERROR][hdiStartPidFiltering():212] Error InValid Pid(-1)
### eSrc 0x201, Audio Format [TD_AUDIO_FORMAT_MPEG2], DDCompMode LINE, Factory value -9, Real set value to SDAL 0
'This is DVB-S Mode
		[1;34;40m[TCS TUNER] [Spent Time] [Freq]:11719000, Normal Lock OK LockingTime:110  [0m
[36mintSdTSData__StartMonitor: settings:: pid: 0 eDataType: 0 unk: 1 tableId: 0 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 64
[0m[36mintSdTSData__StartMonitor: settings:: pid: 17 eDataType: 0 unk: 1 tableId: 66 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 65
[0m[36mintSdTSData__StartMonitor: settings:: pid: 18 eDataType: 0 unk: 1 tableId: 78 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 66
[0m[36mintSdTSData__StartMonitor: settings:: pid: 20 eDataType: 0 unk: 1 tableId: 115 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 67
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 64
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StartMonitor: settings:: pid: 0 eDataType: 0 unk: 1 tableId: 0 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 68
[0m[AP_DAE/Fatal] 442 : t_Subscribe OK (7423 0, 47)

~~[Sub System Error] SourceCommon.cpp:SetAudioDescriptionId():853 Different Encode Type... Audio Encode Type = [1], Audio Description Encode Type = [1723624212]

[36mintSdTSData__StartMonitor: settings:: pid: 113 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 69
[0m[36mintSdTSData__StartMonitor: settings:: pid: 97 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 70
[0m[36mintSdTSData__StartMonitor: settings:: pid: 98 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 71
[0m[36mintSdTSData__StartMonitor: settings:: pid: 100 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 72
[0m[36mintSdTSData__StartMonitor: settings:: pid: 103 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 73
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 69
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StartMonitor: settings:: pid: 113 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 74
[0m[AP_DAE/Fatal] 443 : t_Subscribe OK (7424 113, 51)
[36mintSdTSData__StartMonitor: settings:: pid: 104 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 75
[0m[36mintSdTSData__StartMonitor: settings:: pid: 105 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 76
[0m[36mintSdTSData__StartMonitor: settings:: pid: 106 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 77
[0m[36mintSdTSData__StartMonitor: settings:: pid: 107 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 78
[0m[36mintSdTSData__StartMonitor: settings:: pid: 108 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 79
[0m[DEFAULT/Debugging] 444 : t_MonitorSIOnPAT!!!!! EIT Monitoring start!!!!! 
[36mintSdTSData__StartMonitor: settings:: pid: 18 eDataType: 0 unk: 1 tableId: 80 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 80
[0m[36mintSdTSData__StartMonitor: settings:: pid: 18 eDataType: 0 unk: 1 tableId: 81 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 81
[0m[36mintSdTSData__StartMonitor: settings:: pid: 18 eDataType: 0 unk: 1 tableId: 79 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 82
[0m[36mintSdTSData__StartMonitor: settings:: pid: 18 eDataType: 0 unk: 1 tableId: 96 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 83
[0m[36mintSdTSData__StartMonitor: settings:: pid: 18 eDataType: 0 unk: 1 tableId: 97 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 84
[0m[33mintspITsd_SlotExtractData PMT ==> src: 0x0x442c5008 [0:02 1:b0 2:52 3:00 4:f1] n: 85
[0m########################################
[33mintspITsd_SlotExtractData: SDAL Descrambler START
[0m########################################
[33muldTsd_AllocateDemuxTypeCw: 0
[0m[33muldTsd_AllocateDemuxTypeCw ret: 0
[0m[33mlldTsDmxSetPidFilterCaType: 0 7
[0m[33mlldTsDmxSetPidFilterCaType: 1 7
[0m[33mlldTsDmxSetPidFilterCaType: 2 7
[0m[33mlldTsDmxSetPidFilterCaType: 3 7
[0m[33mlldTsDmxSetPidFilterCaType: 4 7
[0m[33mlldTsDmxSetPidFilterCaType: 5 7
[0m[33mlldTsDmxSetPidFilterCaType: 6 7
[0m[33mlldTsDmxSetCaModeOfBankMode: 0 7
[0m[33mlldTsDmxConnectCa2Bank: 0 0
[0m[33mlldTsDmxEnableCaEngineOfBankMode: 0 1
[0m[36mDMX client connect: cur: -1 new: 279.
[0m[36mdmx_on_data: fd: 279 
[0m[36mdmx_on_data: DMX_SET_FILTER
[0m[33mStarting monitor: -1 PID: 1700 data[0]: 80 mask[0]: f0
[0m[AP_DAE/Fatal] 445 : PMT Contains NO AIT references

~~[Sub System Error] SourceCommon.cpp:SetAudioDescriptionId():853 Different Encode Type... Audio Encode Type = [1], Audio Description Encode Type = [1723624116]

[36mintSdTSData__StartMonitor: settings:: pid: 32 eDataType: 2 unk: 0 tableId: 0 bVersion: 0
[0m[36mintSdTSData__StartMonitor <- 85
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 65
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StartMonitor: settings:: pid: 17 eDataType: 0 unk: 1 tableId: 66 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 86
[0m[36mintSdTSData__StartMonitor: settings:: pid: 5888 eDataType: 0 unk: 1 tableId: 128 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 87
[0m[33mStarted monitor: 87 PID: 1700 
[0m[PVRCore/Fatal] 446 : [CPVRMWEventHandler::t_onChannelScrambled:2952] windowId 0, flagScrambled 0
[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 70
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 71
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 72
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 73
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 75
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 76
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 77
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 78
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 79
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StartMonitor: settings:: pid: 144 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 88
[0m[33mintspITsd_SlotExtractData DMX  pid: 5888 src: 0x0x442db008 [0:80 1:70 2:90 3:c7 4:00] n: 147
[0m[36mdmx_on_data: fd: 279 
[0m[36mdmx_on_data: DMX_SET_FILTER
[0m[33mStopping monitor: 87
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 87
[0m[36mintSdTSData__StopMonitor <- 0
[0m[33mStarting monitor: -1 PID: 1700 data[0]: 81 mask[0]: ff
[0m[36mintSdTSData__StartMonitor: settings:: pid: 5888 eDataType: 0 unk: 1 tableId: 129 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 89
[0m[33mStarted monitor: 89 PID: 1700 
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 88
[0m[36mintSdTSData__StopMonitor <- 0
[0m
~~[Sub System Error] SsEventListBase.cpp:SendEvent():149 Not Register Event, whatHal 2, id 53, eventType 21


~~[Sub System Error] SizeInfoDetectMonitor.cpp:t_SendAFDEvent():207 SendAFDEvent...Error

[33mDCW: 0 0x65 0x3f 0x97 0x3b 0xf1 0x57 0x87 0xcf
[0m[33mDCW: 1 0xc6 0xba 0x27 0xa7 0xd1 0x97 0x5d 0xc5
[0m===========[AGC:0][ifAgcOut:0]
===========[GetBER: 0][lock:1]
[33mintspITsd_S##### send signal from USER, SIG : 62, oscam-r9003-sam(1104)->wr05-camd3_serv(1107) sys_tgkill

lotExtractData DMX  pid: 5888 src: 0x0x442c9008 [0:81 1:70 2:90 3:c7 4:00] n: 147
[0m[36mdmx_on_data: fd: 279 
[0m[36mdmx_on_data: DMX_SET_FILTER
[0m[33mStopping monitor: 89
[0m[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 89
[0m[36mintSdTSData__StopMonitor <- 0
[0m[33mStarting monitor: -1 PID: 1700 data[0]: 80 mask[0]: ff
[0m[TDScaler][VidId:0][544] (Mute OnOff:1)
[PVRCore/Fatal] 447 : [CPVRMWEventHandler::t_onChannelScrambled:2952] windowId 0, flagScrambled 1
[36mintSdTSData__StartMonitor: settings:: pid: 5888 eDataType: 0 unk: 1 tableId: 128 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 90
[0m[33mStarted monitor: 90 PID: 1700 
[0m[Check 3D Status...]
3D Mode to Set: [0],
[VSI] 3D Mode: [0],
[DSP] 3D Mode: [0],
[RES] 3D Mode: [0]
Skip 3D Mode Last Memory Setting...[OFF] or Auto Detected 3D Mode!!!
[Check 3D Status...]
3D Mode to Set: [0],
[VSI] 3D Mode: [0],
[DSP] 3D Mode: [0],
[RES] 3D Mode: [0]
Skip 3D Mode Last Memory Setting...[OFF] or Auto Detected 3D Mode!!!
[Scaler]
 TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [0], [4], [17], [0], [0]
[BackEnd]
 TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [0], [4], [17], [0], [0]
[TDaScaler][SetGeometry][ID:0]Geometry (0, 0, 1920, 1080)
[TDaScaler][SetCapture][ID:0]Capture (0, 0, 720, 576)
[ERROR][hdiSetAudioDelay():644] EXTOUT AUDIO DELAY : Extout source type is error(18)

	>>[ERR:TDsSamAudioProcessor.cpp] t_SetAudioSpeakerDelay():2514  - SDAL ERROR [-1] !!!


~~[Sub System Error] SpeakerControl.cpp:t_UpdateResolutionInfo():3204  - TD ERROR [0x80000000] !!!


Motion Plus setting same...
t_GASFRC3D_SetAutoMotionPlus() : Motion Plus Demo OFF
SetAutoMotionPlus() : Game Mode [OFF]
TDa3dProcessor::Set3DMode(TD_3D_MODE_OFF) -> Turn Glass to OFF
TDa3dProcessor::Set3DMode(TD_3D_MODE_OFF) -> Glass Callback Registered, Run Callback. (3D : OFF, Param : 123193640)
[BT_SS/Fatal] 448 : [Set3DOffsetBroadcastOnOff][line:2460] Set3DOffsetBroadcastOnOff : [Disable]
[BT_SS/Fatal] 449 : [SetShutterInfoForBroadCast][line:2452] shutter info exceeds 65535. m_frame_period[60001], m_DutyForShuttering[125]
[BT_SS/Fatal] 450 : [Set3DModeOffSetForBroadCast][line:2178] m_b3DOffsetBroadcast[0], m_frame_period[60001]... I would make 3DGS as open
[BT_SS/Fatal] 451 : [Set3DSyncDetection][line:2475] Set3DSyncDetection : [Disable]
Set3DMode() : Start, TD3dEffectMode_k = 0, iVideoPlane = 0 iBackendDevice:2
t_GASFRC3D_Set_Cmi3DMode(): Game/MJC Mode is same 
t_PARMA3D_Set_Led3DMode(): 3D Mode is same (0)
SetStereoscopicScreenMode, 395, Not supported Screen
[Scaler]
 TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0]
[DEFAULT/Info] 452 : CALL ClearPESData!!!!!!
[PVRCore/Fatal] 453 : [CPVRMWEventHandler::t_onTuneSuccess:289] windowId 0
[PVRCore/Fatal] 454 : [CPVRAppStateMachineBase::GetNextCommand:65] t_ePVRNextCommand 0
[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 68
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StartMonitor: settings:: pid: 0 eDataType: 0 unk: 1 tableId: 0 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 91
[0m[AP_DAE/Fatal] 455 : t_Subscribe OK (7423 0, 47)
[36mintSdTSData__StopMonitor -> a1: 0x0718b254 id: 74
[0m[36mintSdTSData__StopMonitor <- 0
[0m[36mintSdTSData__StartMonitor: settings:: pid: 113 eDataType: 0 unk: 1 tableId: 2 bVersion: 1
[0m[36mintSdTSData__StartMonitor <- 92
[0m[AP_DAE/Fatal] 456 : t_Subscribe OK (7424 113, 51)
[AP_DAE/Fatal] 457 : PMT Contains NO AIT references
[33mDCW: 1 0xda 0xa2 0x1e 0x9a 0xb4 0xe0 0xae 0x42
[0m[33mlldTsDmxSetDvbCsaKey: 2 0xda 0xa2 0x1e 0x9a 0xb4 0xe0 0xae 0x42
[0m[33mlldTsDmxSetDvbCsaKey: odd key1: 0xdaa21e9a key2: 0xb4e0ae42
...

Code: Select all

cat /mtd_rwcommon/oscam/oscam.log

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Thu Oct 16 21:47:07 2014
-------------------------------------------------------------------------------
2014/10/16 21:47:07        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9003 (arm-v7a8-linux-gnueabi)
2014/10/16 21:47:07        0 s creating pidfile /dtv/oscam.pid with pid 1096
2014/10/16 21:47:07        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/10/16 21:47:07        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/10/16 21:47:07        0 s signal handling initialized
2014/10/16 21:47:07    C1ED8 h webif: decompressed 54245 bytes back into 154648 bytes
2014/10/16 21:47:07    C1ED8 h HTTP Server running. ip=0.0.0.0 port=8887
2014/10/16 21:47:07        0 s Binary without Cardreader Support! No EMM processing possible!
2014/10/16 21:47:07        0 s camd3_server [camd35] creating thread for device 192.168.178.1
2014/10/16 21:47:07    CAA90 p camd35 proxy 192.168.178.1:20248
2014/10/16 21:47:07    CAA90 p camd3_server [camd35] proxy initialized, server 192.168.178.1:20248
2014/10/16 21:47:07        0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/10/16 21:47:07        0 s anti cascading disabled
2014/10/16 21:47:07    D3E70 c plain dvbapi-client granted (anonymous, au=off)
2014/10/16 21:47:07    D3E70 c Using SamyGO dvbapi v0.1.1 (c) bugficks 2013
2014/10/16 21:47:12    D3E70 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/10/16 21:47:12    D3E70 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/10/16 21:47:12    D3E70 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/10/16 21:47:12    D3E70 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/10/16 21:47:12    D3E70 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/10/16 21:47:12    D3E70 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/10/16 21:47:12    D3E70 c [DVBAPI] Receiver wants to demux srvid 00F1 on adapter 0000 camask 0001 index 0000
2014/10/16 21:47:12    D3E70 c New program number: 00F1 (1702:00F1 unknown) [pmt_list_management 3]
2014/10/16 21:47:13    CAA90 p 192.168.178.1: resolved ip=192.168.178.1
2014/10/16 21:47:13    CAA90 p camd3_server [camd35] connecting to 192.168.178.1:20248
2014/10/16 21:47:13    D3E70 c anonymous (1702&000000/0000/00F1/93:F1659C8A79D6FB0E12A4A6A3BC475352): found (824 ms) by camd3_server
So the whole chain up to the DCW Key injection works.
Unfortunately the DCW Key injection does not work yet as I only get black picture.

But well lets see what the next days bring. :-)

Post Reply

Return to “[D] Support”

Who is online

Users browsing this forum: No registered users and 3 guests