oscam on D6500(without descrambling)

[eviltheknivel]

Hello,

i got Oscam running on my UE32D6500, but it does not descrambling. For other D Owner i follow the steps from buckficks from oscam F-Series Thread. I used the Files from v0.3.0.

This chmod +x samyGOso oscam-r9003-samygo ntpclient did not work by me. I used the FTP Tool to change this.

then i used in webshell the command.

Code: Select all

/mtd_rwcommon/oscam/samyGOoscam 

I did nothing else to make it running.
oscam.log with PMT-mode=0:

Code: Select all

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Thu Jan  1 00:00:21 1970
-------------------------------------------------------------------------------
1970/01/01 00:00:21        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9003 (arm-v7a8-linux-gnueabi)
1970/01/01 00:00:21        0 s creating pidfile /dtv/oscam.pid with pid 711
1970/01/01 00:00:21        0 s The current system time is smaller than the build date (Nov  2 2013). Waiting up to 60 seconds for time to correct
2014/01/02 08:01:02        0 s userdb reloaded: 1 accounts loaded, 0 expired, 1 disabled
2014/01/02 08:01:02        0 s signal handling initialized
2014/01/02 08:01:03        0 s 1728 service-id's loaded in 72ms
2014/01/02 08:01:03    CA0D8 h webif: decompressed 54245 bytes back into 154648 bytes
2014/01/02 08:01:03    CA0D8 h HTTP Server running. ip=0.0.0.0 port=8887
2014/01/02 08:01:03        0 s Binary without Cardreader Support! No EMM processing possible!
2014/01/02 08:01:03        0 s CCCam [cccam] creating thread for device x.x.x.x
2014/01/02 08:01:03        0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/01/02 08:01:03        0 s anti cascading disabled
2014/01/02 08:01:03    F5688 c plain dvbapi-client granted (anonymous, au=off)
2014/01/02 08:01:03    F5688 c Using SamyGO dvbapi v0.1.1 (c) bugficks 2013
2014/01/02 08:01:03    F24B0 p x.x.x.x: resolved ip=x.x.x.x
2014/01/02 08:01:03    F24B0 p CCCam [cccam] connecting to x.x.x.x:12000
2014/01/02 08:01:03    F24B0 p CCCam [cccam] proxy initialized, server x.x.x.x:12000
2014/01/02 08:01:20    F5688 c [ADD PID 0] CAID: 1702 ECM_PID: 17AC PROVID: 000000
2014/01/02 08:01:20    F5688 c [ADD PID 1] CAID: 1833 ECM_PID: 18AC PROVID: 000000
2014/01/02 08:01:20    F5688 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BAC PROVID: 000000
2014/01/02 08:01:20    F5688 c [ADD PID 3] CAID: 09AF ECM_PID: 1FAC PROVID: 000000
2014/01/02 08:01:20    F5688 c [ADD PID 4] CAID: 098C ECM_PID: 1AAC PROVID: 000000
2014/01/02 08:01:20    F5688 c Found 5 ECMpids and 4 STREAMpids in PMT
2014/01/02 08:01:20    F5688 c [DVBAPI] Receiver wants to demux srvid 0203 on adapter 0000 camask 0001 index 0000
2014/01/02 08:01:20    F5688 c New program number: 0203 (1702:0203 unknown) [pmt_list_management 3]
2014/01/02 08:01:36    F24B0 p CCCam [cccam] disconnected: reason inactivity
2014/01/02 08:39:13    F5688 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/01/02 08:39:13    F5688 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/01/02 08:39:13    F5688 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/01/02 08:39:13    F5688 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/01/02 08:39:13    F5688 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/01/02 08:39:13    F5688 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/01/02 08:39:13    F5688 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0001 index 0000
2014/01/02 08:39:13    F5688 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]

liboscam.logwith PMT-Mode=0:

Code: Select all

SamyGO OSCAM v0.2.7 - (c) bugficks 2013
* D Series - (null) *
[OSCAM] oscam.config: pmt_mode = 0
[OSCAM] dlsym '_ZN9TCChannel14ScrambledInPMTEv' failed.
Starting PMT Server mode: 0.
Starting DMX Server.
Starting CA Server.
[OSCAM] spITsd_SlotExtractData [0x411acc44].
[OSCAM] _Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj [0xb2d3f0].
[OSCAM] dlsym '_Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj12SdMainChip_k' failed.
[OSCAM] dlsym '_Z20SdTSData_StopMonitorjj12SdMainChip_k' failed.
[OSCAM] _ZN12TCWindowBase12m_SetChannelEPK9TCChannelii [0xc2a828].
[OSCAM] init done...
PMT client connect: cur: -1 new: 112.
dmx client connect: cur: -1 new: 73.
Starting monitor: -1 PID: 17AC data[0]: 80 mask[0]: f0
x_TCDisplay_m_SetChannel: (0x6ba9e460) prognum: 0011 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
dmx client disconnect: cur: 73 new: 73.
dmx client connect: cur: -1 new: 73.
Starting monitor: -1 PID: 1800 data[0]: 80 mask[0]: f0

oscam.config with PMT-Mode=0:

Code: Select all

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9003
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /mtd_rwcommon/oscam/oscam.log
pidfile                       = /dtv/oscam.pid
nice                          = -1
maxlogsize                    = 1024
waitforcards                  = 0
cwlogdir                      = /dtv/

[dvbapi]
enabled                       = 1
reopenonzap                = 1
boxtype                       = pc
au                               = 0
pmt_mode                   = 0


[webif]
httpport                      = 8887
httpuser                      = oscam
httppwd                       = oscam
httphelplang                  = de
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.178.255

[misak]

Hello, I have same TV and the same problem - i tried newcamd, cccam, camd protocols without success.

[beatfreak]

what about the rest of you oscam config files (look for files-link in oscam webif)

the same question for your cardserver, i would like to know the card type (D02 / G09 / V11 like this) and the corresponding CAID
as well as the available services(TV channels) for your abo

note: in other communities / boards stuff like this belongs in the closed/members only sections, if you have concerns posting somthing rather send a PM and we try to keep it more generally here


ok i'll try to create a example.
for more details read in streamboard wiki for oscam, there all files and options are explained

config for TV:
oscam.conf as already posted plus in the dvbapi section add

SpoilerShow

Code: Select all

 user         = username

to define the user that acts as dvbapi client (this user will be configured in oscam.user)

oscam.dvbapi to tell oscam what CAID is supported by your smartcard/cardserver
P: 1234
I: 0
to priorize CAID 1234 and Ignore all the rest, that should be enough for the moment

oscam.server to tell oscam where to find the smartcard in my example it is another fantasy computer in my fantasy network that serves via camd35 protocol

SpoilerShow

Code: Select all

[reader]
label                         = remote
protocol                      = camd35
device                        = 192.168.2.35:9935
user                          = samyD6500
password                      = secretpw
services                      = mytvabo
caid                          = 1234
group                         = 1
audisabled                    = 1

we have created a cardreader named remote that needs a user account to connect and belongs to group 1

oscam.services to tell oscam what tv channels can be decryped by our smartcard

SpoilerShow

Code: Select all

[mytvabo] #you may change this to define the name for this servicegroup
caid                          = 1234
provid                        = 
srvid                         = 0203,0011

we say that our cardreader can decrypt the group of channels named mytvabo containing SID 0203 and 0011 with CAID 1234

oscam.srvid is optional, only purpose is to display the actual channel names in log and webif instead of SID, it is dependent of your tv provider which channel has which SID

oscam.user as promised we configure the users that may connect to our oscam (as we are configuring oscam as client applicaton we only need to define the dvbapi user)

SpoilerShow

Code: Select all

[account]
user                          = username
caid                          = 1234
group                         = 1
services                      = mytvabo

username like stated in .conf and say what CAID and services this user may use and what readergroup he is allowed to use

that for your client-tv, now server

---

assuming our fantasy cardserver is also running oscam and is already running and functional.

oscam.conf needs to have this section

SpoilerShow

Code: Select all

[camd35]
port           = 9935

to accept connections with camd35 protocol on port 9935

oscam.services should at least contain the services defined on client side as this should be already existing and working you may also fully copy it to client configuration

and of course you have to tell the server that your TVs oscam is allowed to connect
oscam.user

SpoilerShow

Code: Select all

[account]
user                          = samyD6500
pwd                      = secretpw
caid                          = 1234
group                         = 1
services                      = mytvabo

could we have a section with at least spoilers that are only readable for logged in members?

[millim]

Hi,

sorry that I have to disappoint you here. This will NOT work on D-series (read bugficks posts).
Just check all the "[OSCAM] dlsym '----' failed logs.
These hook functions are simply not there in exeDSP of the D-series. The naming is similar but not equal.
Three is no port to D-series available today. So do not wast time testing F-series version!!

BR

[beatfreak]

maybe we wont get to decrypted tv channels but as knivels dvbapi already generates requests during zapping the solution can't be that far...
so i think at least the oscam client could be ready to decrypt the channels even if the dvbapi wont pass it back to tv cas

[eviltheknivel]

hello,

if anything is need i can post it.

ok here are my settings:

pic from oscam web if:


oscam.user from Server: (i think we dont need this on samsung tv, because it is a dvbapi connected(build in by bugficks??))

Code: Select all

[account]
disabled                      = 0
user                          = user
pwd                           = pass
description                   = 
hostname                      = 
caid                          = 1702,098C
uniq                          = 0
sleepsend                     = 0
failban                       = 0
monlevel                      = 0
sleep                         = 0
suppresscmd08                 = 0
umaxidle                      = 0
keepalive                     = 0
emmreassembly                 = 2
expdate                       = 
allowedprotocols              = cccam
allowedtimeframe              = 
betatunnel                    = 
group                         = 1,2,4,5,14,20
services                      = sky_098c_,sky_full_1702
ident                         = 
chid                          = 
class                         = 
cacheex                       = 0
cacheex_maxhop                = 0
cacheex_ecm_filter            = 
cacheex_drop_csp              = 0
cacheex_allow_request         = 1
no_wait_time                  = 0
cccmaxhops                    = 2
cccreshare                    = 1
cccignorereshare              = -1
cccstealth                    = -1
fakedelay                     = -1
numusers                      = -1
penalty                       = -1
lb_nbest_readers              = -1
lb_nfb_readers                = -1
lb_nbest_percaid              = 

oscam.conf from TV:

Code: Select all

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9003
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /mtd_rwcommon/oscam/oscam.log
pidfile                       = /dtv/oscam.pid
nice                          = -1
maxlogsize                    = 1024
waitforcards                  = 0
cwlogdir                      = /dtv/

[dvbapi]
enabled                       = 1
reopenonzap                   = 1
boxtype                       = pc
au                            = 0
pmt_mode                      = 6
user                          = 

[webif]
httpport                      = 8887
httpuser                      = oscam
httppwd                       = oscam
httphelplang                  = de
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.178.255

oscam.dvbapi

Code: Select all

P: 1702
I: 0

oscam.server from TV:

Code: Select all

[reader]
label                         = CCCam
description                   = CCCAM
protocol                      = cccam
device                        = mydyndnsxxxxx,12000
user                          = user
password                      = pass
inactivitytimeout             = 30
caid                          = 1702,098C
group                         = 1
cccversion                    = 2.3.0
cccmindown                    = 1
cccreshare                    = 2
cccreconnect                  = 15000

liboscam.log

Code: Select all

SamyGO OSCAM v0.3.0 - (c) bugficks 2013
* D Series - (null) *
[OSCAM] oscam.config: pmt_mode = 6
[OSCAM] dlsym '_ZN9TCChannel14ScrambledInPMTEv' failed.
Starting PMT Server mode: 6.
Starting DMX Server.
Starting CA Server.
[OSCAM] spITsd_SlotExtractData [0x411acc44].
[OSCAM] _Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj [0xb2d3f0].
[OSCAM] dlsym '_Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj12SdMainChip_k' failed.
[OSCAM] dlsym '_Z20SdTSData_StopMonitorjj12SdMainChip_k' failed.
[OSCAM] _ZN12TCWindowBase12m_SetChannelEPK9TCChannelii [0xc2a828].
[OSCAM] _ZN27TCCurrentChannelCheckerBase10SetChannelEP9TCChannelii [0x1bf5604].
[OSCAM] init done...
PMT client connect: cur: -1 new: 110.
dmx client connect: cur: -1 new: 97.
Starting monitor: -1 PID: 1A00 data[0]: 80 mask[0]: f0
x_TCDisplay_m_SetChannel: (0x6ba9e460) prognum: 0203 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
dmx client disconnect: cur: 97 new: 97.
dmx client connect: cur: -1 new: 97.
Starting monitor: -1 PID: 1AAC data[0]: 80 mask[0]: f0
x_TCDisplay_m_SetChannel: (0x6ba9e460) prognum: 0011 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
dmx client disconnect: cur: 97 new: 97.
dmx client connect: cur: -1 new: 97.
Starting monitor: -1 PID: 1700 data[0]: 80 mask[0]: f0
x_TCDisplay_m_SetChannel: (0x6ba9e460) prognum: 00F1 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
dmx client disconnect: cur: 97 new: 97.
dmx client connect: cur: -1 new: 97.
Starting monitor: -1 PID: 1700 data[0]: 80 mask[0]: f0

oscam.log:

Code: Select all

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Thu Jan  1 00:00:24 1970
-------------------------------------------------------------------------------
1970/01/01 00:00:24        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9003 (arm-v7a8-linux-gnueabi)
1970/01/01 00:00:24        0 s creating pidfile /dtv/oscam.pid with pid 824
1970/01/01 00:00:24        0 s The current system time is smaller than the build date (Nov  2 2013). Waiting up to 60 seconds for time to correct
2014/01/02 19:51:24        0 s userdb reloaded: 1 accounts loaded, 0 expired, 1 disabled
2014/01/02 19:51:24        0 s signal handling initialized
2014/01/02 19:51:24        0 s 1728 service-id's loaded in 25ms
2014/01/02 19:51:25    CA0D8 h webif: decompressed 54245 bytes back into 154648 bytes
2014/01/02 19:51:25    CA0D8 h HTTP Server running. ip=0.0.0.0 port=8887
2014/01/02 19:51:25        0 s Binary without Cardreader Support! No EMM processing possible!
2014/01/02 19:51:25        0 s CCCam [cccam] creating thread for device x.x.x.x
2014/01/02 19:51:25        0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/01/02 19:51:25        0 s anti cascading disabled
2014/01/02 19:51:25    F5B58 c plain dvbapi-client granted (anonymous, au=off)
2014/01/02 19:51:25    F5B58 c Using SamyGO dvbapi v0.1.1 (c) bugficks 2013
2014/01/02 19:51:25    F5B58 c [DVBAPI] PMT6: Trying connect to enigma CA PMT listen socket...
2014/01/02 19:51:25    F5B58 c [DVBAPI] PMT6 CA PMT Server connected on fd 7!
2014/01/02 19:51:25    F24A8 p x.x.x.x: resolved ip=x.x.x.x
2014/01/02 19:51:25    F24A8 p CCCam [cccam] connecting to x.x.x.x:12000
2014/01/02 19:51:25    F24A8 p CCCam [cccam] proxy initialized, server x.x.x.x:12000
2014/01/02 19:51:37    F5B58 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/01/02 19:51:37    F5B58 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/01/02 19:51:37    F5B58 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/01/02 19:51:37    F5B58 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/01/02 19:51:37    F5B58 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/01/02 19:51:37    F5B58 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/01/02 19:51:37    F5B58 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0001 index 0000
2014/01/02 19:51:37    F5B58 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]
2014/01/02 19:51:58    F24A8 p CCCam [cccam] disconnected: reason inactivity
2014/01/02 19:52:05    F5B58 c [ADD PID 0] CAID: 1702 ECM_PID: 17AC PROVID: 000000
2014/01/02 19:52:05    F5B58 c [ADD PID 1] CAID: 1833 ECM_PID: 18AC PROVID: 000000
2014/01/02 19:52:05    F5B58 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BAC PROVID: 000000
2014/01/02 19:52:05    F5B58 c [ADD PID 3] CAID: 09AF ECM_PID: 1FAC PROVID: 000000
2014/01/02 19:52:05    F5B58 c [ADD PID 4] CAID: 098C ECM_PID: 1AAC PROVID: 000000
2014/01/02 19:52:05    F5B58 c Found 5 ECMpids and 4 STREAMpids in PMT
2014/01/02 19:52:05    F5B58 c [DVBAPI] Receiver wants to demux srvid 0203 on adapter 0000 camask 0001 index 0000
2014/01/02 19:52:05    F5B58 c New program number: 0203 (1702:0203 unknown) [pmt_list_management 3]
2014/01/02 19:52:13    F5B58 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/01/02 19:52:13    F5B58 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/01/02 19:52:13    F5B58 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/01/02 19:52:13    F5B58 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/01/02 19:52:13    F5B58 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/01/02 19:52:13    F5B58 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/01/02 19:52:13    F5B58 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0001 index 0000
2014/01/02 19:52:13    F5B58 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]
2014/01/02 19:52:23    F5B58 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/01/02 19:52:23    F5B58 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/01/02 19:52:23    F5B58 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/01/02 19:52:23    F5B58 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/01/02 19:52:23    F5B58 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/01/02 19:52:23    F5B58 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/01/02 19:52:23    F5B58 c [DVBAPI] Receiver wants to demux srvid 00F1 on adapter 0000 camask 0001 index 0000
2014/01/02 19:52:23    F5B58 c New program number: 00F1 (1702:00F1 unknown) [pmt_list_management 3]

[beatfreak]

yes, oscam.user on TV may be optional. the recent (D)oscam version have a built in dvbapi also, but in streamboard wiki they still recommend to define the dvbapi user.
oh, sry i noticed this is only stated in the german wiki version. http://www.streamboard.tv/wiki/OSCam/de ... onf#DVBapi

i wanted to see the files from server side to be able to identify reasons for connection problems.

try to remove most of the optional parameters, e.g. sleepsend could be an obstacle when you try to get it running, and inactivitytimeout could also produce problems in this state, for oscam config minimalistic is mostly better
respectively start minimalistic, if its working, test everything if its really working and then you may add optional parameters if you know what they do and if this is what you want to achieve. (e.g. loadbalancer, cacheex, anticasc)

do you have the oscam.services placed in servers and TVs oscam config folder looking like this?

SpoilerShow

Code: Select all

[sky_098c_]
caid                          = 098c
provid                        =
srvid                         = 0203,0011, (and so on)

[sky_full_1702]
caid                          = 1702
provid                        =
srvid                         = 0203,0011, (and so on)

and as your services seem to be for 2 different caids it would be good to priorize 098c in oscam.dvbapi on TV side also

and as your client reader device is a dyndns address i assume that your access to the server config is limited..?

have you had your cccam user already in use on another device (like diablo-cam or linux set-top-box?)

do you have the possibility to try other protocols? you could add a second reader for TVs oscam and only disable the other...
cs378x or cs357x are less config-intensive and more stable for oscam-oscam connections (does your server use oscam?)

for now i didn't find real erros in your config...

what are the values set in oscam.conf on server side for

SpoilerShow

Code: Select all

[cccam]
keepconnected = ?
stealth = ?

you could try to set
ccckeepalive = 1 in your oscam.server on TV

[eviltheknivel]

hi,

i made the option keepalive in the oscam.server on tv form 0 to 1. Now oscam stay connected on server.
i changed the ip adress in the reader connection from dyndns to a ip(192.168.178.141).
This userfile is only the Samsung TV, i never give it to other devices.

The oscam.services are on the same, on tv as on server. On Server oscam changed the Service ID to Channelname when i?m enter "Show Service". On TV oscam dont make that.


Server.conf
[cccam]
keepconnected = 1
stealth = 0

I will try with other protocols, but i think this is not the problem. My Server is oscam r9144. i have in house 4 cccam clients and one oscam.

newest oscam.log with PMT-Mode=6:

Code: Select all

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Fri Jan  3 08:42:54 2014
-------------------------------------------------------------------------------
2014/01/03 08:42:54        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9003 (arm-v7a8-linux-gnueabi)
2014/01/03 08:42:54        0 s creating pidfile /dtv/oscam.pid with pid 1203
2014/01/03 08:42:54        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/01/03 08:42:54        0 s userdb reloaded: 1 accounts loaded, 0 expired, 1 disabled
2014/01/03 08:42:54        0 s signal handling initialized
2014/01/03 08:42:54        0 s 1728 service-id's loaded in 25ms
2014/01/03 08:42:54    C5F98 h webif: decompressed 54245 bytes back into 154648 bytes
2014/01/03 08:42:54    C5F98 h HTTP Server running. ip=0.0.0.0 port=8887
2014/01/03 08:42:54        0 s Binary without Cardreader Support! No EMM processing possible!
2014/01/03 08:42:54        0 s CCCam [cccam] creating thread for device 192.168.178.141
2014/01/03 08:42:54    F2658 p 192.168.178.141: resolved ip=192.168.178.141
2014/01/03 08:42:54    F2658 p CCCam [cccam] connecting to 192.168.178.141:15000
2014/01/03 08:42:54    F2658 p CCCam [cccam] proxy initialized, server 192.168.178.141:15000
2014/01/03 08:42:54        0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/01/03 08:42:54        0 s anti cascading disabled
2014/01/03 08:42:54    FDE48 c plain dvbapi-client granted (anonymous, au=off)
2014/01/03 08:42:54    FDE48 c Using SamyGO dvbapi v0.1.1 (c) bugficks 2013
2014/01/03 08:42:54    FDE48 c [DVBAPI] PMT6: Trying connect to enigma CA PMT listen socket...
2014/01/03 08:42:54    FDE48 c [DVBAPI] PMT6 CA PMT Server connected on fd 9!
2014/01/03 08:43:03    FDE48 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/01/03 08:43:03    FDE48 c [ADD PID 1] CAID: 1833 ECM_PID: 0000 PROVID: 000000
2014/01/03 08:43:03    FDE48 c Found 2 ECMpids and 1 STREAMpids in PMT
2014/01/03 08:43:03    FDE48 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0001 index 0000
2014/01/03 08:43:03    FDE48 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]
2014/01/03 08:48:28    FDE48 c ERROR: Can't open device /tmp/virtual_adapter/ca0 (errno=2 No such file or directory)
2014/01/03 08:48:28    FDE48 c [ADD PID 0] CAID: 1702 ECM_PID: 17AC PROVID: 000000
2014/01/03 08:48:28    FDE48 c [ADD PID 1] CAID: 1833 ECM_PID: 18AC PROVID: 000000
2014/01/03 08:48:28    FDE48 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BAC PROVID: 000000
2014/01/03 08:48:28    FDE48 c [ADD PID 3] CAID: 09AF ECM_PID: 1FAC PROVID: 000000
2014/01/03 08:48:28    FDE48 c [ADD PID 4] CAID: 098C ECM_PID: 1AAC PROVID: 000000
2014/01/03 08:48:28    FDE48 c Found 5 ECMpids and 4 STREAMpids in PMT
2014/01/03 08:48:28    FDE48 c [DVBAPI] Receiver wants to demux srvid 0203 on adapter 0000 camask 0001 index 0000
2014/01/03 08:48:28    FDE48 c New program number: 0203 (1702:0203 unknown) [pmt_list_management 3]
2014/01/03 08:48:28    FDE48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/03 08:48:33    FDE48 c ERROR: Can't open device /tmp/virtual_adapter/ca0 (errno=2 No such file or directory)
2014/01/03 08:48:33        0   --- Skipped 3 duplicated log lines ---
2014/01/03 08:48:33    FDE48 c [ADD PID 0] CAID: 1702 ECM_PID: 174C PROVID: 000000
2014/01/03 08:48:33    FDE48 c [ADD PID 1] CAID: 1833 ECM_PID: 184C PROVID: 000000
2014/01/03 08:48:33    FDE48 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B4C PROVID: 000000
2014/01/03 08:48:33    FDE48 c [ADD PID 3] CAID: 09AF ECM_PID: 1F4C PROVID: 000000
2014/01/03 08:48:33    FDE48 c [ADD PID 4] CAID: 098C ECM_PID: 1A4C PROVID: 000000
2014/01/03 08:48:33    FDE48 c Found 5 ECMpids and 5 STREAMpids in PMT
2014/01/03 08:48:33    FDE48 c [DVBAPI] Receiver wants to demux srvid 0029 on adapter 0000 camask 0001 index 0000
2014/01/03 08:48:33    FDE48 c New program number: 0029 (1702:0029 unknown) [pmt_list_management 3]
2014/01/03 08:48:33    FDE48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

[beatfreak]

ok, at least now oscam tells us what is wrong

Code: Select all

2014/01/03 08:48:33    FDE48 c ERROR: Can't open device /tmp/virtual_adapter/ca0 (errno=2 No such file or directory)

this could be related to missing hooks/functions in D-Series (used with pmt_mode=6)
but i still think that the requests (wants to demux...) should be passed over to your reader..
could you set debug level to 4 (bottom of status page in webif) and in global config loghistorysize to 8192 ? so we'll see a bit more of what oscam is doing

for the channelname display oscam needs a translation list called oscam.srvid, you could simply copy it over webif / files

if your other cccam clients are working this way then oscam should be working also.. what does servers webif say about the connected clients protocols? (at least samy-client should have cccam extended, then server oscam recognizes the samy-cccam client as oscam also)

[misak]

Hello, I made changes, you suggest and here is result:

oscam.dvbapi:

Code: Select all

P: 0D96
I: 0

oscam.conf:

Code: Select all

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9003
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /mtd_rwcommon/oscam/oscam.log
pidfile                       = /dtv/oscam.pid
nice                          = -1
maxlogsize                    = 1024
waitforcards                  = 0
cwlogdir                      = /dtv/

[dvbapi]
enabled                       = 1
pmt_mode                      = 6
reopenonzap                   = 1
user                          = jankob
boxtype                       = pc

[webif]
httpport                      = 8887
httpuser                      = oscam
httppwd                       = oscam
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.10.255

oscam.user:

Code: Select all

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9003
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.user.txt

[account]
caid                          = 0D96
services                      = skylink_neplatene,skylink_platene

[account]
user                          = jankob
caid                          = 0D96
group                         = 1
services                      = skylink_neplatene,skylink_platene

oscam.server:

Code: Select all

[reader]
label                         = cccamserver
protocol                      = cccam
device                        = 192.168.2.1,22222
user                          = janko
password                      = janko
services                      = skylink_neplatene,skylink_platene
inactivitytimeout             = 30
caid                          = 0D96
ident                         = 0D96:000000,000004,000008,00000C,000010
group                         = 1
cccversion                    = 2.1.4
ccckeepalive                  = 1

oscam.services:
[skylink_neplatene]
caid                          = 0D96
provid                        = 
srvid                         = 13BC,13D3,13ED,13F1,13EE,13EF,13F2,13F4,1F41,1F42,1F43,1F44,1F45,1F47,333D,333E,3351,3352,36F8,36F9

[skylink_platene]
caid                          = 0D96
provid                        = 
srvid                         = 13A6,07EA,3331,13A9,3360,36F7,13A7,334D,13AD,332D,13AC,13AE,334A,334B,13B3,13CF,332C,13B7,3330,13AB,3339,13C6,13C2,3333,1B63,13DD,15ED,13D0,15EB,13DA,13DC,13DB,15EE,13D4,13AA,3334,13B8,13B5,3336,3354,15EA,13D5,1B72,15EC,17D4,17D5,13B6,13C3,31F4,07FB,333F,1B7E,13D6,334C,333B,13B4,17D7, 13D8, 3355, 13F0, 3353

oscam.srvid:

Code: Select all

#Skylink neplatene
0D96,0624:13F1|Skylink| Jednotka
0D96,0624:13F2|Skylink| Dvojka
0D96,0624:13EF|Skylink| Markiza
0D96,0624:13F0|Skylink| Doma
0D96,0624:13ED|Skylink| Joj
0D96,0624:13EE|Skylink| Joj Plus
0D96,0624:1F43|Skylink| CT1
0D96,0624:1F44|Skylink| CT2
0D96,0624:1F47|Skylink| CT4
0D96,0624:3700|Skylink| CT HD
0D96,0624:1F42|Skylink| Prima Family
0D96,0624:13A8|Skylink| Prima Family HD
0D96,0624:3351|Skylink| Prima Cool
0D96,0624:3355|Skylink| Prima Love
0D96,0624:3352|Skylink| Nova
0D96,0624:13A6|Skylink| Nova HD
0D96,0624:3353|Skylink| Prima Zoom
0D96,0624:13D3|Skylink| TV Barrandov
0D96,0624:13AF|Skylink| CT 4 HD
0D96,0624:36F8|Skylink| FANDA
0D96,0624:13F4|Skylink| Dajto
0D96,0624:13D8|Skylink| Fooor
0D96,0624:13BC|Skylink| Retro
0D96,0624:1F41|Skylink| CT 1 JM
0D96,0624:1F45|Skylink| CT 1 SM
0D96,0624:36F9|Skylink| Nova Cinema
0D96,0624:333D|Skylink| Telka
0D96,0624:333E|Skylink| Smichov

#Skylink platene
0D96,0624:07EA|Skylink| Eurosport 19,2E
0D96,0624:13B4|Skylink| Mark?za HD
0D96,0624:3331|Skylink| Eurosport
0D96,0624:13A9|Skylink| Eurosport HD
0D96,0624:13B1|Skylink| Eurosport 2 HD
0D96,0624:3360|Skylink| Eurosport 2
0D96,0624:36F7|Skylink| Nova Sport
0D96,0624:13A7|Skylink| Nova Sport HD
0D96,0624:334D|Skylink| Sport 1
0D96,0624:13AD|Skylink| Sport 2
0D96,0624:332D|Skylink| SPORT 5
0D96,0624:13AC|Skylink| Golf Channel
0D96,0624:13AE|Skylink| TV Paprika
0D96,0624:334A|Skylink| Filmbox
0D96,0624:334B|Skylink| Filmbox Plus
0D96,0624:13B3|Skylink| FILMBOX HD
0D96,0624:13CF|Skylink| MGM
0D96,0624:332C|Skylink| CS Film / CS Mini
0D96,0624:13B7|Skylink| HBO HD
0D96,0624:3330|Skylink| HBO
0D96,0624:13AB|Skylink| HBO Comedy
0D96,0624:3339|Skylink| Cinemax
0D96,0624:13C6|Skylink| Film Europe
0D96,0624:13C2|Skylink| Kino CS
0D96,0624:3333|Skylink| Discovery
0D96,0624:1B63|Skylink| Discovery HD Showcase
0D96,0624:13DD|Skylink| Nat Geo Channel
0D96,0624:15ED|Skylink| NGC HD
0D96,0624:13D0|Skylink| Nat Geo Wild
0D96,0624:15EB|Skylink| NG Wild HD
0D96,0624:13DA|Skylink| Viasat Explorer/Spice
0D96,0624:13DC|Skylink| Viasat Nature
0D96,0624:13DB|Skylink| Viasat History
0D96,0624:15EE|Skylink| Viasat HD
0D96,0624:13D4|Skylink| History Channel
0D96,0624:13AA|Skylink| History Channel HD
0D96,0624:3334|Skylink| Fishing & Hunting
0D96,0624:13B8|Skylink| Travel Channel HD CE
0D96,0624:13B5|Skylink| Spektrum HD
0D96,0624:3336|Skylink| Disney Channel
0D96,0624:3354|Skylink| MTV
0D96,0624:15EA|Skylink| MTV Live HD
0D96,0624:13D5|Skylink| Retro Music
0D96,0624:1B72|Skylink| Brava HDTV
0D96,0624:15EC|Skylink| iConcerts HD
0D96,0624:17D4|Skylink| Deluxe Lounge HD
0D96,0624:17D5|Skylink| Unitel Classica HD
0D96,0624:13B6|Skylink| Doku CS
0D96,0624:13C3|Skylink| Muzika CS
0D96,0624:31F4|Skylink| Man-X
0D96,0624:07FB|Skylink| Hustler CZ
0D96,0624:333F|Skylink| LEO TV
0D96,0624:333b|Skylink| Daring!TV
0D96,0624:1B7E|Skylink| Penthouse HD
0D96,0624:13D6|Skylink| duck tv
0D96,0624:334C|Skylink| JimJam
0D96,0624:17D7|Skylink| Auto motor sport HD

log:

Code: Select all

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Fri Jan  3 18:43:05 2014
-------------------------------------------------------------------------------
2014/01/03 18:43:05        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9003 (arm-v7a8-linux-gnueabi)
2014/01/03 18:43:05        0 s creating pidfile /dtv/oscam.pid with pid 1376
2014/01/03 18:43:05        0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/01/03 18:43:05        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/01/03 18:43:05        0 s signal handling initialized
2014/01/03 18:43:05        0 s 85 service-id's loaded in 0ms
2014/01/03 18:43:05    C60A0 h webif: decompressed 54245 bytes back into 154648 bytes
2014/01/03 18:43:05    C60A0 h HTTP Server running. ip=0.0.0.0 port=8887
2014/01/03 18:43:05        0 s Binary without Cardreader Support! No EMM processing possible!
2014/01/03 18:43:05        0 s cccamserver [cccam] creating thread for device 192.168.2.1
2014/01/03 18:43:05    D4758 p 192.168.2.1: resolved ip=192.168.2.1
2014/01/03 18:43:05    D4758 p cccamserver [cccam] connecting to 192.168.2.1:22222
2014/01/03 18:43:05        0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/01/03 18:43:05        0 s anti cascading disabled
2014/01/03 18:43:05    D7930 c plain dvbapi-client granted (jankob, au=off)
2014/01/03 18:43:05    D7930 c Using SamyGO dvbapi v0.1.1 (c) bugficks 2013
2014/01/03 18:43:05    D7930 c [DVBAPI] PMT6: Trying connect to enigma CA PMT listen socket...
2014/01/03 18:43:05    D7930 c [DVBAPI] PMT6 CA PMT Server connected on fd 7!
2014/01/03 18:43:05    D4758 p cccamserver [cccam] proxy initialized, server 192.168.2.1:22222
2014/01/03 18:44:54    D4758 p cccamserver [cccam] disconnected: reason disconnect
2014/01/03 18:45:15    D4758 p cccamserver [cccam] connecting to 192.168.2.1:22222
2014/01/03 18:45:26    D7930 c [ADD PID 0] CAID: 0D03 ECM_PID: 0457 PROVID: 000000
2014/01/03 18:45:26    D7930 c [ADD PID 1] CAID: 0D70 ECM_PID: 0461 PROVID: 000000
2014/01/03 18:45:26    D7930 c [ADD PID 2] CAID: 0D0F ECM_PID: 046B PROVID: 000000
2014/01/03 18:45:26    D7930 c [ADD PID 3] CAID: 0D96 ECM_PID: 0475 PROVID: 000000
2014/01/03 18:45:26    D7930 c [ADD PID 4] CAID: 0624 ECM_PID: 047F PROVID: 000000
2014/01/03 18:45:26    D7930 c [ADD PID 5] CAID: 0666 ECM_PID: 0493 PROVID: 000000
2014/01/03 18:45:26    D7930 c Found 6 ECMpids and 6 STREAMpids in PMT
2014/01/03 18:45:26    D7930 c [DVBAPI] Receiver wants to demux srvid 13ED on adapter 0000 camask 0001 index 0000
2014/01/03 18:45:26    D7930 c New program number: 13ED (0D03:13ED unknown) [pmt_list_management 3]
2014/01/03 18:46:21    D7930 c [ADD PID 0] CAID: 0D03 ECM_PID: 0458 PROVID: 000000
2014/01/03 18:46:21    D7930 c [ADD PID 1] CAID: 0D70 ECM_PID: 0462 PROVID: 000000
2014/01/03 18:46:21    D7930 c [ADD PID 2] CAID: 0D0F ECM_PID: 046C PROVID: 000000
2014/01/03 18:46:21    D7930 c [ADD PID 3] CAID: 0D96 ECM_PID: 0476 PROVID: 000000
2014/01/03 18:46:21    D7930 c [ADD PID 4] CAID: 0624 ECM_PID: 0480 PROVID: 000000
2014/01/03 18:46:21    D7930 c [ADD PID 5] CAID: 0666 ECM_PID: 048A PROVID: 000000
2014/01/03 18:46:21    D7930 c Found 6 ECMpids and 5 STREAMpids in PMT
2014/01/03 18:46:21    D7930 c [DVBAPI] Receiver wants to demux srvid 13EE on adapter 0000 camask 0001 index 0000
2014/01/03 18:46:21    D7930 c New program number: 13EE (0D03:13EE unknown) [pmt_list_management 3]
2014/01/03 18:46:23    D7930 c [ADD PID 0] CAID: 0D70 ECM_PID: 0464 PROVID: 000000
2014/01/03 18:46:23    D7930 c [ADD PID 1] CAID: 0D0F ECM_PID: 046E PROVID: 000000
2014/01/03 18:46:23    D7930 c [ADD PID 2] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/01/03 18:46:23    D7930 c [ADD PID 3] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/01/03 18:46:23    D7930 c [ADD PID 4] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/01/03 18:46:23    D7930 c Found 5 ECMpids and 5 STREAMpids in PMT
2014/01/03 18:46:23    D7930 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000
2014/01/03 18:46:23    D7930 c New program number: 13F0 (0D70:13F0 unknown) [pmt_list_management 3]
2014/01/03 18:46:23    D7930 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

Why oscam tries 0D70:13F0? Correctly it have be 0D96:13F0 (Skylink).

Best Regards
Michal