oscam on D6500(without descrambling)

Here for general support for D series TVs, request and problem solve area.

eviltheknivel
SamyGO Project Donor
Posts: 11
Joined: Tue Dec 31, 2013 7:27 pm

Re: oscam on D6500(without descrambling)

Post by eviltheknivel » Fri Jan 03, 2014 9:29 pm

in the E/F Thread there is a log from working descrambling.

Code: Select all

2013/10/26 05:49:18    BEE20 p CCcamRemote1 [cccam] connecting to workig server:port
2013/10/26 05:49:18    BEE20 p CCcamRemote1 [cccam] proxy initialized, server workig server:port
2013/10/26 05:51:38    C0818 c [DVBAPI] Receiver sends PMT command 3 for channel 2C8B
2013/10/26 05:51:38    C0818 c [ADD PID 0] CAID: 0919 ECM_PID: 065B PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD PID 1] CAID: 093B ECM_PID: 06BF PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD PID 2] CAID: 09CD ECM_PID: 0723 PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD STREAM 0] CAID: 0919 ECM_PID: 065B PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD STREAM 1] CAID: 093B ECM_PID: 06BF PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD STREAM 2] CAID: 09CD ECM_PID: 0723 PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD STREAM 0] CAID: 0919 ECM_PID: 065B PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD STREAM 1] CAID: 093B ECM_PID: 06BF PROVID: 000000
2013/10/26 05:51:38    C0818 c [ADD STREAM 2] CAID: 09CD ECM_PID: 0723 PROVID: 000000
2013/10/26 05:51:38    C0818 c Found 3 ECMpids and 3 STREAMpids in PMT
2013/10/26 05:51:38    C0818 c [DVBAPI] Receiver wants to demux srvid 2C8B on adapter 0000 camask 0001 index 0000
2013/10/26 05:51:38    C0818 c New program number: 2C8B (0919:2C8B unknown) [pmt_list_management 3]
2013/10/26 05:51:38    C0818 c [DVBAPI] Demuxer #0 trying to descramble PID #2 CAID 09CD PROVID 000000 ECMPID 0723 ANY CHID VPID 00B1
So our oscam will not add the Streams.
I think we need more help...

User avatar
beatfreak
SamyGO Project Donor
Posts: 585
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: oscam on D6500(without descrambling)

Post by beatfreak » Fri Jan 03, 2014 10:40 pm

@ misak
you may remove the incomplete account in your oscam.user (every account hast to have user= and group= parameter, see streamboard wiki)
the second account is ok

is there any specific reason you have 2 services for 1 caid ?

have you tested the ident parameter for your remote reader with other clients?

what type is your server?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

misak
Posts: 5
Joined: Thu Jan 02, 2014 2:17 pm

Re: oscam on D6500(without descrambling)

Post by misak » Sat Jan 04, 2014 9:44 am

OK, I removed incomplete account, services was divided to paid and free channels, I think, it is not problem, bud I merged it now. Ident is OK, other clients have no problem with it. On server side is oscam, it was there connected about 30 clients last year, when I was tested it. Nobody had a problem, so on server side is for sure all OK. I tried with CAMD3 and it still doesnt work.
On client side I have CAID:SRVID 0000:13EF and on server side is client connected and CAID:SRVID is FFFF:FFFF.

Florian7
Posts: 2
Joined: Fri Jan 03, 2014 12:22 pm

Re: oscam on D6500(without descrambling)

Post by Florian7 » Mon Jan 13, 2014 7:51 pm

Sorry for my bad english,

on Kathrein oscam works without boxtype in Oscam.confg.
Perhaps it?s works allthough on Samsung TV ?

Flocki1987
Posts: 4
Joined: Mon Jan 20, 2014 1:33 pm
Location: Gambach (Hessen) / Germany

Re: oscam on D6500(without descrambling)

Post by Flocki1987 » Mon Jan 20, 2014 9:02 pm

Does this realy work on a UE46D6500?

If yes, may someone tell me, how to install and configure it? I'm looking forward for that function since years :)

altsat2000
Posts: 4
Joined: Sat Jan 11, 2014 11:32 pm

Re: oscam on D6500(without descrambling)

Post by altsat2000 » Wed Jan 22, 2014 12:41 am

Hi to all !

My it i's d6530 writh firmware T-GASDEUC-1021.1, BT-G (CODE NUMBER UE37D6500)
cpu info
SpoilerShow
@ phpsysinfo $ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1196.03
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 1

Hardware : Samsung SDP1001 Evaluation board
Revision : 0000
Serial : 0000000000000000
And new oscam.logo
>> OSCam << cardserver started at Tue Jan 14 21:43:21 2014
-------------------------------------------------------------------------------
2014/01/14 21:43:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9003 (arm-v7a8-linux-gnueabi)
2014/01/14 21:43:21 0 s creating pidfile /dtv/oscam.pid with pid 7245
2014/01/14 21:43:21 0 s services reloaded: 0 services freed, 42 services loaded, rejected 0
2014/01/14 21:43:21 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/01/14 21:43:21 0 s signal handling initialized
2014/01/14 21:43:21 0 s 1728 service-id's loaded in 16ms
2014/01/14 21:43:21 C8DC8 h webif: decompressed 54245 bytes back into 154648 bytes
2014/01/14 21:43:21 C8DC8 h HTTP Server running. ip=0.0.0.0 port=8887
2014/01/14 21:43:21 0 s Binary without Cardreader Support! No EMM processing possible!
2014/01/14 21:43:21 0 s BK-SERVER [cccam] creating thread for device xxxxxx
2014/01/14 21:43:21 FA650 p xxxxxx: resolved ip=xxxxxx
2014/01/14 21:43:21 FA650 p BK-SERVER [cccam] connecting toxxxxxxx:13000
2014/01/14 21:43:21 0 s nnnsky [newcamd] creating thread for device xxxxxxxxxxx
2014/01/14 21:43:21 FD798 p proxy xxxxxxxx:55444 newcamd525 (fd=0)
2014/01/14 21:43:21 FD798 p nnnsky [newcamd] proxy initialized, server xx.xxxxxxxx:55444
2014/01/14 21:43:21 0 s nnnsky1 [newcamd] creating thread for device xxxxxxxx
2014/01/14 21:43:21 0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/01/14 21:43:21 0 s anti cascading disabled
2014/01/14 21:43:21 1083C8 c plain dvbapi-client granted (anonymous, au=off)
2014/01/14 21:43:21 1083C8 c Using SamyGO dvbapi v0.1.1 (c) bugficks 2013
2014/01/14 21:43:21 106AF8 p proxy xxxxxxxx:55555 newcamd525 (fd=0)
libOSCAM.log
SamyGO OSCAM v0.2.7 - (c) bugficks 2013
* D Series - (null) *
[OSCAM] oscam.config: pmt_mode = 6
[OSCAM] dlsym '_ZN9TCChannel14ScrambledInPMTEv' failed.
Starting PMT Server mode: 6.
Starting DMX Server.
Starting CA Server.
[OSCAM] spITsd_SlotExtractData [0x411ad81c].
[OSCAM] _Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj [0xaac530].
[OSCAM] dlsym '_Z21SdTSData_StartMonitorjP19SdTSData_Settings_tj12SdMainChip_k' failed.
[OSCAM] dlsym '_Z20SdTSData_StopMonitorjj12SdMainChip_k' failed.
[OSCAM] _ZN12TCWindowBase12m_SetChannelEPK9TCChannelii [0xba9760].
[OSCAM] init done...
x_TCDisplay_m_SetChannel: (0x74548460) prognum: 2B70 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
x_TCDisplay_m_SetChannel: (0x74548460) prognum: 2B5D scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
x_TCDisplay_m_SetChannel: (0x74548460) prognum: 76C2 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1
x_TCDisplay_m_SetChannel: (0x74548460) prognum: 2B63 scrambled: 1 i0: 0009 i1: 0000, ret: 0x1

altsat2000
Posts: 4
Joined: Sat Jan 11, 2014 11:32 pm

Re: oscam on D6500(without descrambling)

Post by altsat2000 » Sun Feb 02, 2014 8:02 am

@ juuso you hawe d serie work oscam for you model ?

geko37
Posts: 1
Joined: Thu Jan 30, 2014 7:55 pm

Re: oscam on D6500(without descrambling)

Post by geko37 » Sat Feb 08, 2014 1:00 pm

Is there a way for oscam on UE32D6200 ??

Florian7
Posts: 2
Joined: Fri Jan 03, 2014 12:22 pm

Re: oscam on D6500(without descrambling)

Post by Florian7 » Sat Feb 08, 2014 5:39 pm

Has some one make a test with an Doscam Version?

mark21
Posts: 53
Joined: Fri Sep 23, 2011 8:25 pm

Re: oscam on D6500(without descrambling)

Post by mark21 » Mon Feb 17, 2014 12:17 pm

Hi Guys!

I have am tv UE40D7000 with ARM cpu, i have root acces, ftp and telnet.

Now i use Diablo Wifi for decoding sat channels , i have oscam server in Vu+solo2 , and i would like to make tv with oscam client l, because wifi from diablo don't work well..

Any chance to work on D7000 , oscam?

Post Reply

Return to “[D] Support”