D to E series plasma conversion?
D to E series plasma conversion?
Has anyone looked at possible mainboard or mainboard+logic board swaps to convert a D-series to E-series plasma? It looks like most of the differences between the 2 are processor upgrades and the addition of an "upgrade module" possibility. If the panel driver boards are the same maybe this is possible.
PN60F8500AFXZA
T-FXPAKUC 1206.3 + SamyGO
"BrickMaster 2015"
T-FXPAKUC 1206.3 + SamyGO
"BrickMaster 2015"
Re: D to E series plasma conversion?
hehe, good approach to upgrade TV. From some experience it is possible upgrade:
B550 -> B650
C5xx-> C65x
D6xxx ->D65xx
But i haven`t heard anyone has success in upgrading from lower series to higher. Only chance is if you know someone from samsung`s service who could help you to compare/ test boards.
B550 -> B650
C5xx-> C65x
D6xxx ->D65xx
But i haven`t heard anyone has success in upgrading from lower series to higher. Only chance is if you know someone from samsung`s service who could help you to compare/ test boards.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: D to E series plasma conversion?
PSxxD4x0 to PSxxE4x0 is impossible because of the differences between panels.
D series have 1365x768 panels and E series have 1024x768 ones. I even tried to change the resolution setting jumper on the mainboard ( XGA / WXGA ) but no joy.
Plus there are no efficient setting in the service menu
D series have 1365x768 panels and E series have 1024x768 ones. I even tried to change the resolution setting jumper on the mainboard ( XGA / WXGA ) but no joy.
Plus there are no efficient setting in the service menu