Is it possible that p2e addresses were wrong and p2e changed some other info or even firmware under this addresses?
However ... i don't see any network and get wrong mac if i put network configuration by hand :/ I have ue40d5500. Any hope?
It works also under windows after adding new vid and pid to inf.
I will today have mac address of original wis90abgn - how can i flash it to this dongle?
Glad it isnt bricked afterall
I will flash first 6 bytes of mac to his and see what will happend. If i will be able i will try to copy his whole eeprom with script from the forum, so you can use it on your own. IMHO eeprom dump script on forum has an error. The step should be not i++ but i+=2 - becouse now it runs very long and all data are dumped twice becouse e2p dumps word - 2 bytes at onece.
Of course in place of his mac i will put some rubish so Szajsung will not block his dongle.
If you guys have a ftp with about 2GB i can upload VDI disk image form VirtualBox and VM configuration - and win7 32bit driver for moded wifi adapter. Maybe someone will make his dongle usable.
Any idea what chip is inside wis09abgn2, or wis10abgn? Both are compatible with my D5500.
And are there any 2870 chips usb dongles still available?
Checked with cloned mac address. It doesn't help :/ So you can add to wiki that dwa-125 A3 doesn't work at least on D550, will try it on B series - maybe on weekend and dump eeprom of wis09abgn.
Too bad my first dlink died :/ I doubt it will be replaced on warranty. IMHO it was somehow driver fault. So before you start to flash check if it is readable - i didn't.
First bytes i thought, see previous posts
Im interested in changing mac
If you search for this prefix on google it will confirm.
Will try later