LN55B650 - BRICKED GOOD!!!!

Here for general support for B series TVs, request and problem solve area.

User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: LN55B650 - BRICKED GOOD!!!!

Post by erdem_ua »

How could you make it? I guess TV don't let you install B630's firmware...
Anyway. Do you remember that old version of your Firmware?
You needed to build ExLink cable to enter TV and load external firmware from USB.
Just read wiki pages first.
I wish you repair it.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: LN55B650 - BRICKED GOOD!!!!

Post by juusso »

build cable serial to stereo plugs and if you do not have serial port on your PC you need buy USB to serial adapter. you could restore bricked TV if you'll build cable. making exlink cable is easy. after you make such service cable let us know.and we help you further. here is no chance to restore TV without cable. Also possible, that with help of cable we can't. restore TV too. Make exlink and pray to God for Christmas miracle. For cable scheme look at the wiki. How to connect.TV you can find.on.wiki.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
nostromo1983
Posts: 72
Joined: Sat Nov 07, 2009 4:39 pm

Re: LN55B650 - BRICKED GOOD!!!!

Post by nostromo1983 »

You can enable Debug mode using the interrupt button which is placed on the motherboard, it could be like this
Image
or like this:
Image
Samsung LE32B554 T-CH5DEUC 2006.0 with patched u-boot for usb boot with OpenEmbedded custom kernel with network supported and usb rootfs
User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: LN55B650 - BRICKED GOOD!!!!

Post by erdem_ua »

Connect it to TV.
Here is the wiki pages has information about process.
http://wiki.samygo.tv/index.php?title=G ... _to_u-boot

In first step, just make a connection to your TV with ExLink. But do not enter u-boot.
If you don't enable Debug mode, than you needed to press panic button (pictures at top. thanks nostromo1983 )
Just capture log and send here. After we recognize the problem, we will say what you needed to do...

Post Reply

Return to “[B] Support”