LN55B650 - BRICKED GOOD!!!!

Here for general support for B series TVs, request and problem solve area.

User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: LN55B650 - BRICKED GOOD!!!!

Post by erdem_ua »

Image
User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: LN55B650 - BRICKED GOOD!!!!

Post by erdem_ua »

Setup your ExLink configuration. you might have already debug mode enabled but forgotten later...
You needed to close that gate quickly after opening TV. That will enable debug mode.
Just needed to connect those terminals with wire, coin, bolt, or anything conductor. For avoid shot circuit, you might want to use duct tape and paper that will cover other areas...
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: LN55B650 - BRICKED GOOD!!!!

Post by juusso »

Nice video ;)
What you doing wrong in my opinion -
1. Power OFF TV (from electricity)
2. Make short and do not release it
3. Power ON TV
4. Watch what is going on terminal.
If nothing happends
5. Release short connection
6. Watch what is going on terminal.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: LN55B650 - BRICKED GOOD!!!!

Post by juusso »

I do not know if secure terminal is good (you need use serial connection from com port, not telnet to IP), Check connection settings you use. And you can try putty as terminal...
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
majonezz
SamyGO Project Donor
Posts: 63
Joined: Sat Feb 06, 2010 10:44 am
Location: Wroclaw, Poland

Re: LN55B650 - BRICKED GOOD!!!!

Post by majonezz »

Make sure to select option "handshaking" to none in your terminal program, because tv uses RXD and TXD only, so none of control signals are available.
Godz420
Posts: 1
Joined: Thu Dec 10, 2015 6:34 am

Re: LN55B650 - BRICKED GOOD!!!!

Post by Godz420 »

Do you still have this board?

Post Reply

Return to “[B] Support”