Good afternoon,
Would anybody know the location of the EEPROM to reset with jumper wire on
Samsung BN96-11526A Main Board for LN40B540P8F Samsung TV ?
I don't want to reset the wrong EEPROM trying to resolve a firmware upgrade issue...
If anyone needs to see a picture of the board...i could upload if need be.
(but a quick search on GG for bn96-11526a will show it)
Thank you in advance for your help !
location of EEPROM on main board #bn96-11526a(reset)
Re: location of EEPROM on main board #bn96-11526a(Resolved !!)
Hello,
I decided to try the closest EEPROM to the upgrade plug & SoC, welded 2 wires to VCC and SDA connected to a switch.(GRD not used)
Started with defaults, enter service menu. etc. Problem solved !
Took a few pics to show which one is the right EEPROM.
(it may help others as this forum helped me understand a bit more about Samsung TV's)
Thank you all.
I decided to try the closest EEPROM to the upgrade plug & SoC, welded 2 wires to VCC and SDA connected to a switch.(GRD not used)
Started with defaults, enter service menu. etc. Problem solved !
Took a few pics to show which one is the right EEPROM.
(it may help others as this forum helped me understand a bit more about Samsung TV's)
Thank you all.
You do not have the required permissions to view the files attached to this post.