[Ended] E series widget -autostart w/o USB

Here are software that related with Samsung E series TVs.
Please don't create any new topic here unless you have software to post/release.
Locked

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: E series widget -autostart w/o USB

Post by juusso »

you don't have to touch anything except config.xml - add ticker on. No need for skype at all.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

mm85
SamyGO Project Donor
Posts: 14
Joined: Fri Sep 27, 2013 7:11 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by mm85 »

mmhorda wrote:Here is a small present for those who has firmware T-MST10PDEUC <= 1030.0. (might work on higher firmware versions too)
A way to make Autostart and SKYPE working together.

1. Follow instruction on the first page!
after all is working we can continue...

1. login to TV via telnet
2. modify /mtd_rwcommon/widgets/user/SamyGO/data/run.sh
you need to hash these lines.
#cp /mtd_rwcommon/widgets/user/SamyGO/data/libSkype.so /mtd_rwcommon/moip/engines/Skype/libSkype.so
#cat <<EOF>/mtd_rwcommon/moip/engines/Skype/AutoStart
#EOF
3. modify /mtd_rwcommon/widgets/user/SamyGO/config.xml
you need to change ticker settings
change <ticker>n</ticker> to <ticker>y</ticker>
4. Delete Skype.
5. Restart TV.
6. Press SmartHub , Tools and navigate to --> Settings --> Service Manager --> Autoticker -- SamyGO-E
7. Install Skype
8. Restart TV again and enjoy :)
This is were I came from - and it did not work. SamyGo was loaded but no FTP/telnet, but Skype working.
Then I tried to remove the Script-Lines which will replace the Skype Files - same result - no FTP/telnet but Skype working

When I just modify the config.xml I will get a working FTP/telnet but Skype is no longer working/autostart (because of the lines in the run.sh of SamyGo Widget)

Is the changed libSkype.so only required for autostart or for rooting also? As far as I can see the Widget only starts the ftp and tftp process, and some other stuff.

mm85
SamyGO Project Donor
Posts: 14
Joined: Fri Sep 27, 2013 7:11 pm

Re: E series widget -autostart w/o USB

Post by mm85 »

I did a complete reset and started again :D I created a new USB Drive with the original SamyGo Installer (no modifications done by me)

1.) SmartHub reset to default
2.) Power Off -> Power On
3.) Installed Skype
4.) Start Skype, logon to Skype - set Options to automatically start and logon Skype
5.) Power Off
6.) Connect SamyGo Install USB Drive
7.) Power On
8.) Start SmartHub
9.) Install SamyGo Widget (no errors, everything OK)
10.) Power Off -> Power On
11.) Skype no longer working (as expected)
12.) Telnet + FTP is working

so far so good - and now I need Skype to work.....

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: E series widget -autostart w/o USB

Post by juusso »

reinstall skype
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

mm85
SamyGO Project Donor
Posts: 14
Joined: Fri Sep 27, 2013 7:11 pm

Re: E series widget -autostart w/o USB

Post by mm85 »

now i did mmhoa steps to get Skype working again:

1. modify /mtd_rwcommon/widgets/user/SamyGO/data/run.sh
you need to hash these lines.
#cp /mtd_rwcommon/widgets/user/SamyGO/data/libSkype.so /mtd_rwcommon/moip/engines/Skype/libSkype.so
#cat <<EOF>/mtd_rwcommon/moip/engines/Skype/AutoStart
#EOF

2. modify /mtd_rwcommon/widgets/user/SamyGO/config.xml
you need to change ticker settings
change <ticker>n</ticker> to <ticker>y</ticker>

4. Delete Skype.
5. Restart TV.
6. Press SmartHub , Tools and navigate to --> Settings --> Service Manager --> Autoticker -- SamyGO-E
7. Install Skype
8. Restart TV
9. SamyGo loaded as Ticker, No FTP, No Telnet
10. Start Skype , Logon and set to automatically start and logon
11. Restart TV
12. Skype gets started, SamyGo loaded as Ticker (OnScreen Message appears)
13. No FTP, No Telnet

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: E series widget -autostart w/o USB

Post by juusso »

don't touch anything, just reinstall skype.

i think you're using wrong encoding for mofied script.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

mm85
SamyGO Project Donor
Posts: 14
Joined: Fri Sep 27, 2013 7:11 pm

Re: E series widget -autostart w/o USB

Post by mm85 »

So I reinstalled SamyGo according to my steps above - Telnet + FTP working then i did as you suggested:

1.) removed Skype
2.) reinstall Skype
3.) Telnet + FTP still working - Skype not working
4.) Power Off + Power On
5.) Telnet + FTP not working
6.) Manually started SamyGo Widget
7.) Still no Telnet + FTP
8.) Starting Skype -> Skype seems to launch SamyGo -> Telnet + FTP working
9.) Skype hangs on "Loading"

Is this because the run.sh script replaces the Skype Libaray? How do i get skype running?

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: E series widget -autostart w/o USB

Post by juusso »

remove skype library from widgets dir? :-)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

mm85
SamyGO Project Donor
Posts: 14
Joined: Fri Sep 27, 2013 7:11 pm

Re: E series widget -autostart w/o USB

Post by mm85 »

No success - i also needed to remove the data.zip file because the library was extracted everytime the run.sh was starter.

Skype still hanging on "Loading"

no skype library present in SamyGo\Data directory

mm85
SamyGO Project Donor
Posts: 14
Joined: Fri Sep 27, 2013 7:11 pm

Re: E series widget -autostart w/o USB

Post by mm85 »

just figured out that the Camera is not working (starting the Camera Widget) I don't know if this is important

Locked

Return to “[E] Software”