Page 4 of 44
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sun Apr 14, 2013 9:08 pm
by zoelechat
Here is a first report for the "V2":
After installing it and 4 or 5 reboots, virtual USB disappeared and on the next reboot most apps had been erased from smarthub which took a long time to reinstall them.
Since that it seems to be more stable.
Pros:
- libSkype.so file is no longer automatically replaced by original or erased, so SamyGO still works after many reboots for now
- Previous version was frequently awakening my NAS HDD over LAN/DLNA even if not in use, doesn't seem to do it anymore
Cons:
- Still needed to initially replace files in /Skype dir, else no virtual USB is shown
- Virtual USB disappears when a physical USB device is plugged/unplugged until next reboot
Maybe I need a little more time to confirm all that, so I'm going to install the "V3"(?) which is 5 bytes larger!?
edit: just a question, when I replace a SamyGO version by a newer one by ftp, do I need to launch it once again in smarthub or just reboot, and is it preferable to uninstall it before?
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 6:48 am
by juusso
Yes, you can just replace SamyGO directory with all its content trough ftp. Better remove it first. And yes, until now no solution about {have to replace skype library}, maybe in future all will be done automatically, i hope so.
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 10:50 am
by zoelechat
After further testing and with latest version installed, I encountered no more stability issues since yesterday.
So:
Now works, UE40ES6540, T-MST10PDEUC-1032.0

Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 10:53 am
by juusso
do you need to replace skype libs or it runs "as is"?
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 10:59 am
by zoelechat
Yes I need to but only once, else no virtual USB could be seen.
edit: I didn't replace them since second version, maybe i should replace it now with original one? I prefer not because that works, and I don't use Skype at all

Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 5:36 pm
by damnoodle
Works UN46ES7100 T-MST10PAUSC-1025.0
smb and nfs mount with time. Virtual USB shows mounts after 20 min of searching.
Wouldn't download from local server "not enough memory available" this gave me a reason to remove crapware
Nice work!
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 6:26 pm
by ed2
Hi,
it works at es7090 Firmware 2005.
when i show per FTP the Folders are mountet under /dtv/usb/sdj but allShare dont show the Folders.
What can i do?
Mfg
ed2
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 6:55 pm
by juusso
damnoodle wrote:
smb and nfs mount with time. Virtual USB shows mounts after 20 min of searching.
This may happen when you have a lot of PC`s on your network. Better edit nfs/samba scripts and write IP and share names manually.
ed2 wrote:
when i show per FTP the Folders are mountet under /dtv/usb/sdj but allShare dont show the Folders.
I don`t know why do you search it trough all share. just go troug virtual usb - IP - movies - and so on and you should get your files listed there. But can be you have to TUNE UP your scripts MANUALLY according your network setup.
zoelechat wrote:edit: I didn't replace them since second version, maybe i should replace it now with original one?
Not needed. This is same file.
rope wrote:if i sync the v2 widget it said me : Un-signatured ELF Binary File is detected
Should be ok now.
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 7:05 pm
by fluffi444
ed2 wrote:Hi,
it works at es7090 Firmware 2005.
when i show per FTP the Folders are mountet under /dtv/usb/sdj but allShare dont show the Folders.
Could you pls explain what you have done exactly? I tried new version but can't get ftp working...

Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Apr 15, 2013 8:31 pm
by ed2
Hi,
juuso wrote:
ed2 wrote:
when i show per FTP the Folders are mountet under /dtv/usb/sdj but allShare dont show the Folders.
I don`t know why do you search it trough all share. just go troug virtual usb - IP - movies - and so on and you should get your files listed there. But can be you have to TUNE UP your scripts MANUALLY according your network setup.
When i go to Source / USB SamyGO Virt. and press OK it opens Type /Videos and then it shows nothing(thats is AllSHarePlay)
it`s loading and loading.
Any Idea
CAM00081.jpg
CAM00082.jpg
CAM00083.jpg