Download here
Samygo DumpMaker is a samygo extension for B series samsung TV (CI and CI+) to make dumps of system partitions to USB.
SUPPORTED TV MODELS:
All TV models with ContentLibrary. CI and CI+
MAKE BEFORE START
First you need enable (if not already) copy/remove feature in Content Library Manager,
enable debug and dissable Watchdog:
- TV is off
- Enter Service Menu ( quickly push [MENU] [MUTE] [POWER] on your remote control )
on USA models: [MUTE] [1] [8] [2] [POWER]
[*]Change setting (Control -> Sub Option -> Wiselink Write -> On<-off)
[*]Change setting (Control -> Sub Option -> Watchdog -> Off<-on)
[*]Change setting (Control -> Sub Option -> rs232-jack -> debug<-UART<-Logic)
[*]Power off TV [POWER]
[*]Remove all USB drives/keys attached to TV
INSTALLATION
- unpack and copy "Samygo-dm" dir to USB drive (fat32) and attach it to TV.
/samygo-dm directory must be on root of USB with file structure on it:
Code: Select all
/samygo-dm/
------clmeta.dat
----------/DumpMaker/
----------------clmeta.dat
----------------README
----------------dumpmaker.png
----------------dm.sh
----------------loader.so
----------------shadow.ttf
- Enter [Content Library Manager] -> Select [USB] -> [Children]
- Use Copy function (yellow RC button) on TV to copy "SamygoHorse2" to TV internal flash.
(After pressing yellow button, choose "copy all").
USAGE
- Attach empty fat32 USB (min 2Gb) to TV, do not unplug it until TV reboot (can take up to few hours, but usualy procedure takes about 20 min).
- Go to [Content Library Manager] -> [My Contents] -> [Children]
- You can run it from: [Menu] -> [Source list] -> [USB] -> [Content Library] -> [My Contents] -> [Children]
- Run DumpMaker
- TV stops to respond to RC, it is normal. Procedure info is visible on TV screen. Do not power off TV!
- Wait until you see ContentLibrary back.
- You find log files on USB, do not delete it.
- On root of USB you find dumps. Keep safe, might you need it later
-Sometimes it is required up to 3hours to get full dump. Be patient. But average time is les than 20 min (depends from TV model and USB speed)
Code: Select all
CHANGELOG:
v0.2.5
added dump of partitions bml0/10 and bml0/11 (temporary no progress indications on TV screen, just wait until app finishes.)
v0.2
- OSD graphics added
- Lite version - only bml0/1 - bml0/9 partitions dumping
v.0.1
- First version, tested on LE40B653T5W