[App] PVR+ 3.x

Here are software that related with Samsung B series TVs. Like hex editors, new version of BusyBox or internal software, app programs that will run in your TV hardware.:!:This forum is NOT FOR USER QUESTIONS or Problems.

User avatar
juusso
SamyGO Moderator
Posts: 10116
Joined: Sun Mar 07, 2010 6:20 pm

Re: PVR+ 3.x

Post by juusso » Fri Dec 09, 2011 2:54 am

LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
geo650
Official SamyGO Developer
Posts: 302
Joined: Wed Oct 07, 2009 12:03 pm

Re: PVR+ 3.x

Post by geo650 » Fri Dec 09, 2011 5:19 pm

samybill wrote:PVR+ 2.0 didn't work
Hmm, I remember meinsource was able to record using PVR+ 1.0 on his German LE37B650 CI+. Can you try PVR+ 1.0 then? Try also SamyGoPVR.
samybill wrote:As far as I know an ex-link cable as discribed in the SamyGo Wiki cannot be attached to my type of TV
Maybe it can work, but there will be a problem with entering destination path using keyboard because only numbers are allowed. So, please forget it.
samybill wrote:With the cam removed I only can configure analoge channels, I will try to borrow a dvb-T smartcard and try to record. with a antenna. I'll be back ;)
Can't you receive something without CAM and smartcard? Maybe CAM module is a reason of problems.

samybill
Posts: 50
Joined: Mon Nov 07, 2011 10:07 am
Location: "s-Hertogenbosch, Netherlands

Re: PVR+ 3.x

Post by samybill » Fri Dec 09, 2011 5:32 pm

I tried to record a uncrypted DTV-channel with the smartcard removed but I had the same problem.

I will try PVR+ 1.0 and SamyGoPVR and will come back to you.
Last edited by samybill on Fri Dec 09, 2011 11:30 pm, edited 1 time in total.
LE40B652 CI+ Firmware 2006.0 unpatched
cable TV , DVB-C over CI+

samybill
Posts: 50
Joined: Mon Nov 07, 2011 10:07 am
Location: "s-Hertogenbosch, Netherlands

Re: PVR+ 3.x

Post by samybill » Fri Dec 09, 2011 6:14 pm

PVR+ 1.0, PVR+ 1.5 and SamyGoPVR all don't work

But I managed to make a very bad recording of Netherlands 1(uncripted) with the whole cam(smartcard included) removed using PVR+ 1.0

Conclusion:
The problem is the cam

What to do now :?: :arrow:

A challenge for software developers to hack the CI+ :!:
I think
LE40B652 CI+ Firmware 2006.0 unpatched
cable TV , DVB-C over CI+

samybill
Posts: 50
Joined: Mon Nov 07, 2011 10:07 am
Location: "s-Hertogenbosch, Netherlands

Re: PVR+ 3.x

Post by samybill » Fri Dec 09, 2011 11:18 pm

CI+ seems to work like trojan horse:
The provider is able to limit your possibilities by software updates of the cam module.
See this (german)video

http://www.youtube.com/watch?v=cvroR8cN6To

So the challenge is to fool the cam module, mayby by porting the signal somehow to the DVB-T receiver if there is any.

The reason why I'm suggesting this is because on my pc I have the Anysee E30 combo plus with a smartcard of the same provider(Ziggo).
http://anysee.com/eng/product/anyseeE30_main.php

However I am able to record with Windows Mediacenter, but the DVB-C signal is configured as an emulation of DVB-T

So:
I hope some software developer will be inspired by this :idea: :idea: :idea:
LE40B652 CI+ Firmware 2006.0 unpatched
cable TV , DVB-C over CI+

User avatar
geo650
Official SamyGO Developer
Posts: 302
Joined: Wed Oct 07, 2009 12:03 pm

Re: PVR+ 3.x

Post by geo650 » Sun Dec 11, 2011 12:34 am

samybill wrote:CI+ seems to work like trojan horse...
Wow. I hate CI+ already, even I have no CI+ in my TV.
I think, this is a subject for a separate forum's thread.


PVR+ 3.1 is coming. *
One serious bug has been detected: in OTR mode PVR+ 3.0 doesn't wait 30s before it starts recording. In PVR+ 3.1 there will be also one menu option called "Quiet recording". I would like to have good translations for all languages before submitting PVR+ 3.1 here. Thanks.
With this option OTR will be started with dimmed screen much earlier and some buttons (STOP, POWER, >>, <<) will be blocked so nobody [at home] will be able to stop, reprogramm or turn off your TV during scheduled recording.
Thanks to samybill Dutch OSD translation will appear.

*) released 2013-03-24

nostromo1983
Posts: 72
Joined: Sat Nov 07, 2009 4:39 pm

Re: PVR+ 3.x

Post by nostromo1983 » Sun Dec 11, 2011 1:26 am

geo650 wrote:
nostromo1983 wrote:
juuso wrote:NO, it doesn`t work on B550.
Long time i didnt work on samygo, but isn't there a standalone SDL lib that is exporting the lacking SDL function into exeDSP, but for B550?
Or is there a way to statically link the function needed from SDL Lib?
Regards,
Can you try this patch ? Please unzip and replace these 3 files.
Tell me if it helps or not.
Hi geo650, so i've tried running your package with the pached .so files.
I copied the package into /mtd_contents/mods/PVRplus/
Here is my command line:

Code: Select all

# ./injectso $(pidof exeDSP) /mtd_contents/mods/PVRplus/loader.so Game_Main /mtd_contents/mods/PVRplus/

Module injector V1.2 for ARM based CPUs.
(copyleft) SmartSmurf 2010 (smartsmurf@shared-files.de)

Info: Import dlopen set at 0x004aa27c
Info: Import dlsym set at 0x004a9898
Info: Import dlclose set at 0x004a9370
Info: current register set:
R0 =0xFFFFFFFC R1 =0x00000000 R2 =0x00000001 R3 =0x00000000
R4 =0x00000001 R5 =0x02513E38 R6 =0x01FF2E48 R7 =0x000000F0
R8 =0x00000000 R9 =0x00000000 R10=0xBED79A78 R11=0x00000000
R12=0x00000001 SP =0xBED79A68 LR =0x4005DA44 PC =0x4005B008
CPSR=0x80000010

Info: new SP for inject code 0xBED79668
Done.
# cat /proc/45/maps |grep .so
40000000-4001d000 r-xp 00000000 8b:06 103        /lib/ld-2.5.90.so
40024000-40026000 rw-p 0001c000 8b:06 103        /lib/ld-2.5.90.so
40026000-4003a000 r-xp 00000000 8a:09 182        /mtd_appdata/Comp_LIB/libptp.so
4003a000-40041000 ---p 00014000 8a:09 182        /mtd_appdata/Comp_LIB/libptp.so
40041000-40042000 rw-p 00013000 8a:09 182        /mtd_appdata/Comp_LIB/libptp.so
40042000-40048000 r-xp 00000000 8a:09 183        /mtd_appdata/Comp_LIB/libusb.so
40048000-4004f000 ---p 00006000 8a:09 183        /mtd_appdata/Comp_LIB/libusb.so
4004f000-40051000 rw-p 00005000 8a:09 183        /mtd_appdata/Comp_LIB/libusb.so
40051000-40063000 r-xp 00000000 8b:06 107        /lib/libpthread-2.5.90.so
40063000-4006a000 ---p 00012000 8b:06 107        /lib/libpthread-2.5.90.so
4006a000-4006b000 r--p 00011000 8b:06 107        /lib/libpthread-2.5.90.so
4006b000-4006c000 rw-p 00012000 8b:06 107        /lib/libpthread-2.5.90.so
4006e000-40070000 r-xp 00000000 8b:06 140        /lib/libdl-2.5.90.so
40070000-40077000 ---p 00002000 8b:06 140        /lib/libdl-2.5.90.so
40077000-40078000 r--p 00001000 8b:06 140        /lib/libdl-2.5.90.so
40078000-40079000 rw-p 00002000 8b:06 140        /lib/libdl-2.5.90.so
40079000-40142000 r-xp 00000000 8b:06 118        /lib/libstdc++.so.6.0.9
40142000-40149000 ---p 000c9000 8b:06 118        /lib/libstdc++.so.6.0.9
40149000-4014c000 r--p 000c8000 8b:06 118        /lib/libstdc++.so.6.0.9
4014c000-4014e000 rw-p 000cb000 8b:06 118        /lib/libstdc++.so.6.0.9
40153000-401bc000 r-xp 00000000 8b:06 116        /lib/libm-2.5.90.so
401bc000-401c3000 ---p 00069000 8b:06 116        /lib/libm-2.5.90.so
401c3000-401c4000 r--p 00068000 8b:06 116        /lib/libm-2.5.90.so
401c4000-401c5000 rw-p 00069000 8b:06 116        /lib/libm-2.5.90.so
401c5000-401cf000 r-xp 00000000 8b:06 109        /lib/libgcc_s.so.1
401cf000-401d6000 ---p 0000a000 8b:06 109        /lib/libgcc_s.so.1
401d6000-401d7000 rw-p 00009000 8b:06 109        /lib/libgcc_s.so.1
401d7000-402e2000 r-xp 00000000 8b:06 104        /lib/libc-2.5.90.so
402e2000-402ea000 ---p 0010b000 8b:06 104        /lib/libc-2.5.90.so
402ea000-402eb000 r--p 0010b000 8b:06 104        /lib/libc-2.5.90.so
402eb000-402ed000 rw-p 0010c000 8b:06 104        /lib/libc-2.5.90.so
#
Seems like the module is not injected into exeDSP?
I've tried remote controller buttons menu+record (red circle) and nothing appears.
Note that i can successfully inject for ex chaninfo module, or samygodca module.
To be sure, here is the md5sum output:

Code: Select all

# md5sum PVRplus/*
dc2fc84a438bf80e329e09cd7947dea4  PVRplus/PVRplus.png
680e1254fb4df19c17217d7b03e2c2c9  PVRplus/clmeta.dat
5d2c116be2c6cb3c527eb48fff56dd6f  PVRplus/loader.so
12c23adaf6066f9f9139e9e510a1828b  PVRplus/messages_CZ.txt
4d77b3d812381290d899dd4a628f88b2  PVRplus/messages_DE.txt
ff093f6e827e07ced7b4ba0d0e391c7c  PVRplus/messages_EN.txt
f4c63b51824dfcce138b93a0802299c3  PVRplus/messages_FR.txt
e09688e017421d08872e66b007e8abb6  PVRplus/messages_PL.txt
4e8d430066da571b24e4348011c67846  PVRplus/osd_ttf.so
d9a100824bacc7bacac2a2fc7200480d  PVRplus/pvrplus.cfg
143ad50cd741b16d73b2afb06a41498b  PVRplus/pvrplus.so
Thanks for your support!
Regards,
Samsung LE32B554 T-CH5DEUC 2006.0 with patched u-boot for usb boot with OpenEmbedded custom kernel with network supported and usb rootfs

User avatar
geo650
Official SamyGO Developer
Posts: 302
Joined: Wed Oct 07, 2009 12:03 pm

Re: PVR+ 3.x

Post by geo650 » Sun Dec 11, 2011 7:11 am

nostromo1983 wrote:Hi geo650, so i've tried running your package with the pached .so files.
I copied the package into /mtd_contents/mods/PVRplus/
...
Seems like the module is not injected into exeDSP?
...
Oops, I was thinking there is only SDL problem. Those patched files were the ones statically linked with SDL library.
Well, please check /mtd_ram partition for any files and quote here. For example:

Code: Select all

ls -la /mtd_ram
cat /mtd_ram/PVRplus_debug.log       # if exist
P.S. Do it after calling PVR+.

madkai93
Posts: 15
Joined: Mon Aug 15, 2011 9:21 pm
Location: Germany

Re: PVR+ 3.x

Post by madkai93 » Sun Dec 11, 2011 9:21 am

HI geo

thanks for your great app. Works without problems on my TV with harddrive connect via usb.

But my problem is that i?ve an external hdd connect to my router which I enable as nfs device via SamyGo Extensions.
In SamyGOPVR I can define a direct path, so it records to the external hdd.
In PVR+ I only can select SamyGo Virtual USB as device to record. This is virtual with no space, so the record won?t start. I need to record to SamyGo Virtual USB/smb/IP/recording
Is there any way to set it like in SamyGoPVR?

One more questions: For OTR i need to have PVR+ in autostart, right?

Thanks for your support!

madkai
LE32B650 CI

User avatar
geo650
Official SamyGO Developer
Posts: 302
Joined: Wed Oct 07, 2009 12:03 pm

Re: PVR+ 3.x

Post by geo650 » Sun Dec 11, 2011 7:17 pm

madkai93 wrote:...I need to record to SamyGo Virtual USB/smb/IP/recording
Is there any way to set it like in SamyGoPVR?
Please create a script PVRplus/scripts/MOVIE001.sh which will mount your network share in /mtd_wiselink/MOVIE001 and select MOVIE001 target for recording.
madkai93 wrote:...For OTR i need to have PVR+ in autostart, right?
Right.

Post Reply

Return to “[B] Software”