SamyGO Control Center - StartLib & Explorer

[ue32b7000]

i have not any new an idea too...
ue32b7000:
what is configurations of your TV? Which extensions & patches are installed? Are you remember exactly, after transferring of which files first reboot occure ? Which ftp-client you are used on PC side? Try and remember all details, pls..

I have unmodified firmware chucipdeuc 3000, no patches installed.

I wanted to make a backup of mtd_tlib/

and during ftp via totalcommander I replaced the content library files with V3, rebooted everything was fine after that I replaced the bgm.mp3 file in wildlife dir. everything worked, again started controlcenter ftp, since that moment the tv stays on for 40sec +-

[ue32b7000]

thats weird, you had no PartitionSwitch_0_0 ...but you have PartitionSwitch_1_0
...what happens to your tv right now??
do you execute controlcenter from usb stick?..i think i have alter path in script has something to do with controlcenter script execution... i have to do some tests on my tv... this will take 10 min or so

it seems nothing is changed...

I execute controlcenter from usb stick

it goes on.... 40sec goes off withblinkin red light..

[devill2]

deleted, see quote

[ue32b7000]

EDIT: I tested and script behaves as expected, this means your tv is already set to run from backup partition..
..i don't know why but tv has probably done this, we can try to change to original partition (PartitionSwitch_0_0),
but i don't know if this partition is ok, because tv set switch to backup already...
..so you have to choose if you want to try this..i don't know what or if anything will happen..

Oh ok, I have nothing else to try..

so let's try

Edit: Is it possible to check the original partition first?

[devill2]

deleted, see quote

[cybertrn]

I wanted to make a backup of mtd_tlib/
and during ftp via totalcommander I replaced the content library files with V3, rebooted everything was fine after that I replaced the bgm.mp3 file in wildlife dir. everything worked, again started controlcenter ftp, since that moment the tv stays on for 40sec +-

1. What is V3?
2. Are you replaced all /mtd_tlib ?
3.After that TV rebooted by watchdog?
4. Are you tested new bgm.mp3 by means of starting Content Library on TV?
5. Are you switch off or reboot TV before second start Control Center?

[ue32b7000]

ok, same as before copy to directory /etc/cmd/ and then execute partswitch2.

you have to login via telnet and then mount dev device in tv manually and then check it, but you have to check really carefully, so i don't think it is possible in 40 sec..but as far as i remember, when boot fails on one partition the tv tries to boot from the other....
...because you have ci+ device you cannot boot from usb device or enter bootloader either...
only thing you could try is to build ex-link cable and enter debug menu and try to restore it from there, but only if tv don't power off there, but i believe it will also power off in debug menu, because you cannot interrupt boot process..

tried it, same result with the power off..

[devill2]

deleted, see quote

[ue32b7000]

I wanted to make a backup of mtd_tlib/
and during ftp via totalcommander I replaced the content library files with V3, rebooted everything was fine after that I replaced the bgm.mp3 file in wildlife dir. everything worked, again started controlcenter ftp, since that moment the tv stays on for 40sec +-

Edit:
1. What is V3? >
mainmenu content library files
2. Are you replaced all /mtd_tlib ?
not all only content mainmenu files
3.After that TV rebooted by watchdog?
it never rebooted it shuts off actually
4. Are you tested new bgm.mp3 by means of starting Content Library on TV?
correct
5. Are you switch off or reboot TV before second start Control Center?

switch off

[ue32b7000]

i had the bad feeling that nothing will change, because problem is not related to boot partitions, but it was worth a try.

Am I now running on original partition?


you can see defect1+2.log in mtd_rwarea/
and TVViewer[60c72490h][QS: 50] : 1010 ms #from watchdog
these are the error reports right?

How does a healty filesystem looks comparing list below?
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/tbml6 3328 3328 0 100% /
none 10240 12 10228 0% /dtv
/dev/tbml7 896 896 0 100% /mtd_boot
none 10240 0 10240 0% /mtd_ram
/dev/stl0/13 11224 1752 9472 16% /mtd_rwarea
/dev/tbml10 61400 53256 8144 87% /mtd_exe
/dev/tbml11 29440 29440 0 100% /mtd_appdata
/dev/stl0/12 429024 392320 36704 91% /mtd_tlib
/dev/stl1/2 51160 152 51008 0% /mtd_contents
/dev/stl0/14 121724 14508 107216 12% /mtd_down
/dev/stl1/3 897952 224 897728 0% /mtd_wiselink
/dev/stl0/15 86000 176 85824 0% /mtd_swu
/dev/sda1 503344 390528 112816 78% /dtv/usb/sda1