Extended SM through ruSamsungTVCommunicator on E series!

[vuhothang]

I can extended SM and enable any option. I was change to region ASIA-ATV -> ASIA-DTV, Local set EA-Viet -> ED-Viet, Tuner type SI-ATC2 -> Sec-TC, but i can using Analog and DVB-T. i want to using DVB-C, can someone tell me how to use TV with DVB-C because my cable provide is Analog and DVB-C (viet nam like euro). the first time i change tunet type to DVB-TCS -> DVB-T2CS with region and local set locked with EA-Viet ASIA-ATV my TV is bricked and SS Support replace new mainboard for me.

Thanks!

[juusso]

perhaps your tv isn't armed with dvb-c tuner and you can't select it from service menu without to brick tv. no required hardware.

[vuhothang]

but when i see SS Support replace new mainboard for UA40EH5300 for me, i was capture the mainboard i see tuner is DTTX -51B/C3S BN40-00232B DVB-TC HALF OEM by XuGuang Tech Co., Ltd.



Uploaded with ImageShack.us

or link https://docs.google.com/file/d/0BwEip4o ... sp=sharing

can i read spec of this tuner

[vuhothang]

Now i can using DVB-C, DVB-T, Analog with my TV UA40EH5300 when i changed Region/Localset to PANEURO/EU, my TV became UE46EH5300 (not yet re change to UE40EH5300, no need!!!).

Thanks to wiki samy go and many people in this forum!

Thanks! Thanks! Thanks!

[MarocOS]

Hello,

Okay no way to activate my network again so i have created a DIY IR Transceiver to activate the desactivated menu on tv!

but this doesn't work what's wrong with my DIY?

[MarocOS]

Suite of pictures

[propergol]

1)First you should take your photos in daytime and not at night like those one... they are extremly blury due to the lack of light.
Anyway, since I can't see your hardware system, we would assume it is correct.

2) You did not mention from what device you are outputing the sound signal....
I assume its a mobile phone.

If so....one solution is to inscrease you mobile device volume to its max, and if it still not works try a different kernel that would allow higher header output.
It did worked in my case.

[juusso]

use yuor laptop rather than mobile phone to transmit signal. A lot of phones have not enough volume amplification even with max vol set.

[MarocOS]

Hi,

Yes Sorry about the pics see below for it

1 ) - I have used many phones with max volume, no luck!
2 ) - I have used My windows Laptop, no luck!
3 ) - I have used My Linux workstation (increased volume), no luck!

This all are tested before i put the pics here. and btw i have searched on internet for the scheme (many sources) before i sold them in that way.

The problem is i have tested also before i put them here with camera and not blinking (used camera with direct electricity and works).

But in final step i used only one IR Led and it send the commands like a charme with my linux workstation.

Code: Select all

                        -------------------
  |->| ++ |<-|          |  LED'S
  |  |____|  |          -------------------
  |__________| --

   +        -
    \      /
     \    /
      \  /
      |  |
      |  |               -------------------
      |  |               | CABLE 2 WIRES
      |  |               -------------------
      ||||
      |  |
      ----               -------------------
      |  |               |  JACK 3.5 mm
      ----               -------------------
      |  |
       --

[ricci206]

Good morning,

but the extended service menu' with rusamsungcommunicator work on firmware 1036 for ue40eh5300p ?

On my tv not working...

Please help me!!!

Thank you