UnBricking UE32ES6100W(NB-41-01812a)

Here for general support for E series TVs, request and problem solve area.
Post Reply

louisld
Posts: 2
Joined: Wed Jan 03, 2018 1:23 pm

UnBricking UE32ES6100W(NB-41-01812a)

Post by louisld » Wed Jan 03, 2018 3:52 pm

Hello!

Sorry for my bad english.
I'm have smart tv Samsung UE32ES6100W.

unsuccessful opening of the service menu))
I'm don't know what I did in the service menu, but my tv is now brick .
My TV doesn't react turn on power in any way and its indicator doesn't light up.

I was visiting on wiki page(https://wiki.samygo.tv/index.php/UnBric ... PROM_Reset), but did not find the necessary help.
How do hard reset SoC EEPROM?
Or what needs to be done to fix the TV, if possible))?

I tried unite circuit on IC901:
M_E_VCC+M_E_SDA
M_E_GND+M_E_SDA

I attach photos of the motherboard.

Thanks for your help.
You do not have the required permissions to view the files attached to this post.

User avatar
juusso
SamyGO Moderator
Posts: 9901
Joined: Sun Mar 07, 2010 6:20 pm

Re: UnBricking UE32ES6100W(NB-41-01812a)

Post by juusso » Wed Jan 03, 2018 7:12 pm


M_E_VCC+M_E_SDA or M_E_GND+M_E_SDA is the true way.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. Imagerooting K seriesImage, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

louisld
Posts: 2
Joined: Wed Jan 03, 2018 1:23 pm

Re: UnBricking UE32ES6100W(NB-41-01812a)

Post by louisld » Wed Jan 03, 2018 7:31 pm

Unfortunately (M_E_VCC + M_E_SDA or M_E_GND + M_E_SDA) didn't result.
1. I'm unite circuit
2. power on
3. waiting about 30 seconds,
4. power off
5. disconnect jumper
6. power on
AAAND nothing((((...

But on picture three is present SDA and M_HRESET What are they for?

User avatar
juusso
SamyGO Moderator
Posts: 9901
Joined: Sun Mar 07, 2010 6:20 pm

Re: UnBricking UE32ES6100W(NB-41-01812a)

Post by juusso » Thu Jan 04, 2018 6:31 am

If you touched micom upgrade in aervice menu, then no way to repair unless you have SPI programmer.

If you see nothing on the screen, then probably some other settings have been changed and this can be fixed. Or not. I do not know. Just try.

Sometimes you have to repeat again and again until you get success. Read forum. Hera are a lot of reports about how the eeprom reset procedure was.

LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. Imagerooting K seriesImage, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[E] Support”