[Done]Serial problem

[monoschwarz]

Serial problem

I have a built ex-link cable this
I can also create files (see Appendix)

but unfortunately they are not readable (only numbers and special characters)
I tested it with cutecom; cu; Putty Ubuntu

what is wrong?

tv is a UE46ES6340

[juusso]

Nor readable text usually means wrong connection parameters (speed etc...)

[maxprasak]

Serial problem

I have a built ex-link cable this
I can also create files (see Appendix)

but unfortunately they are not readable (only numbers and special characters)
I tested it with cutecom; cu; Putty Ubuntu

what is wrong?

tv is a UE46ES6340

You maybe missing important thing -> this ex-link cable is primary for B-series, not for E-series!
I had same problem, you need TTL level RS232 version ... like this
And please check and prove where rx and tx are located at jack side ... see this

[monoschwarz]

thank you
I've been doubted me

ok then that means that both the service debug log output (my TV has a service output) and the vga input of the TV's must be present
(VGA >> Nokia CA-42)

or you have to prove the jack plug as the plug vga cable with a Nokia CA-42
(jack 3.5 >> Nokia CA-42)

[juusso]

jack 3.5 >> Nokia CA-42, exact as shown on the wiki.

[monoschwarz]

ok then I need to buy a ca-42, I'll use it to play on SamyGO?
when it becomes public, because otherwise I would first ask whether the time my friends have one because, unfortunately, I have none
ps
I'm still 2 old remotes, so I could also build a ir port

ok I've bought one at the 5 ?, it is also not
I know from my sat-receiver is quickly broken something without serial

[monoschwarz]

I can log

I use nfs server / client and telnet ftp server
may still oscam

So I use SamyGO if you need a beta tester so
write me a pn

I'm not a dev, but with linux I know with something (I can write simple scripts, extensive I can understand)
things straight in bootargs and cmd lines of the boot loader I'm not bad (but just not a dev)

tv and firmware see signature
mfg
mono