[Ended] E series widget -autostart w/o USB

Here are software that related with Samsung E series TVs.
Please don't create any new topic here unless you have software to post/release.
Locked

miazza
SamyGO Project Donor
Posts: 732
Joined: Wed Apr 03, 2013 6:10 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by miazza »

With latest widget putty telnet and ssh not working on my ES8000 (before they were partially working and could connect).
Shell commander http://192.168.1.xx:1080/phpsysinfo/shell.php still working fine and FTP as well.
SMB folder is available but nothing inside.

root@(none) phpsysinfo $ insmod /mnt/lib/modules/2.6.35.13/kernel/fs/cifs/cifs.ko
insmod: can't insert '/mnt/lib/modules/2.6.35.13/kernel/fs/cifs/cifs.ko': invalid module format
root@(none) phpsysinfo $ dmesg | tail
[ 466.700000] SYS_GET_MEMORY_CONFIG called
[ 468.916000] SYS_GET_MEMORY_CONFIG called
[ 470.608000] SYS_GET_MEMORY_CONFIG called
[ 591.656000] (WRN)[devGfxCommon.c_7525][staGfx_GetWaitVSyncSem][7525] Front buffer is not set properly!! (u32Gfx_BaseAddr = 0xABBE9000, u32Gfx_CurrentDisplayAddr = 0xAC3D2000)
[ 591.660000]
[ 591.660000]
[ 605.628000] SYS_GET_MEMORY_CONFIG called
[ 767.056000] ##### send signal from USER, SIG : 15, httpd(1526)->php-cgi(1838) sys_kill
[ 792.808000] cifs: version magic '0081, release SMP preempt mod_unload ARMv7 ' should be '0081, debug SMP preempt mod_unload ARMv7 '
[ 792.856000] ##### send signal from USER, SIG : 15, httpd(1622)->php-cgi(1857) sys_kill

miazza
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by juusso »

your previous shell is still there on 2023 port, not on 23. You already know your tv is a bit other and we need time to understand why.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

longera
Posts: 7
Joined: Thu Apr 25, 2013 5:26 am

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by longera »

SamyGO successfully installed on UE40ES6800 with T-MST10PDEUC_1033.0 firmware.

Virtual USB: OK
SAMBA: OK
FTP: OK
TELNET: OK
Shell web-client: OK
NFS: not fully tested (I check it today and post the results) *UPDATE* - work perfectly.
Last edited by longera on Wed May 01, 2013 10:49 am, edited 1 time in total.

miazza
SamyGO Project Donor
Posts: 732
Joined: Wed Apr 03, 2013 6:10 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by miazza »

juuso wrote:your previuos shell is still there on 2323 port, not on 23. You already know your tv is a bit other and we need time to understand why.
At port 2323 I cannot open a Telnet connection. And also SSH cannot anymore connect. May be this is due to my TV that is a bit different.

With Netcat I can open Telnet at 1023:
Cmd line: 192.168.1.14 1023
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 8 (v7l)
processor : 0
BogoMIPS : 1990.65
processor : 1
BogoMIPS : 1990.65
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 8
Hardware : Samsung SDP1106 evaluation board
Revision : 0000
Serial : 0000000000000000
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by juusso »

@miazza, pls use netcat on 1023 or 2023 ports until we`ll find solution. No ssh nor telnet on your model.

Waiting for reports from other users, especially from ES7xxx/8xxx with firmware T-ECPDEUC. Thanks.

p.s. @zarigo, your tread is now here.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

ed2
Posts: 20
Joined: Wed Mar 27, 2013 2:35 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by ed2 »

Hi juuso,
a report from es7090 T-ECPDEUC 2005 bougt in Germany.

Code: Select all

root@(none) init.d $ insmod /mnt/lib/modules/2.6.35.13/kernel/fs/nfs/nfs.ko
insmod: can't insert '/mnt/lib/modules/2.6.35.13/kernel/fs/nfs/nfs.ko': invalid module format
root@(none) init.d $ dmesg | tail
[ 2423.896000] ##### send signal from USER, SIG : 15, httpd(1399)->php-cgi(2764) sys_kill
[ 2445.012000] ##### send signal from USER, SIG : 15, httpd(1398)->php-cgi(2778) sys_kill
[ 2446.828000] ##### send signal from USER, SIG : 15, httpd(1398)->php-cgi(2780) sys_kill
[ 2457.412000] ##### send signal from USER, SIG : 15, httpd(1397)->php-cgi(2791) sys_kill
[ 2483.528000] sunrpc: version magic '0081, release SMP preempt mod_unload ARMv7 ' should be '0081, debug SMP preempt mod_unload ARMv7 '
[ 2483.544000] lockd: version magic '0081, release SMP preempt mod_unload ARMv7 ' should be '0081, debug SMP preempt mod_unload ARMv7 '
[ 2483.560000] nfs: version magic '0081, release SMP preempt mod_unload ARMv7 ' should be '0081, debug SMP preempt mod_unload ARMv7 '
[ 2506.940000] ##### send signal from USER, SIG : 15, httpd(2794)->php-cgi(2930) sys_kill
[ 2658.988000] nfs: version magic '0081, release SMP preempt mod_unload ARMv7 ' should be '0081, debug SMP preempt mod_unload ARMv7 '
[ 2659.020000] ##### send signal from USER, SIG : 15, httpd(2767)->php-cgi(3009) sys_kill

Code: Select all

root@(none) init.d $ uname -a
Linux (none) 2.6.35.13 #1 SMP PREEMPT Fri May 4 10:40:18 KST 2012 armv7l GNU/Linux

Code: Select all

root@(none) init.d $ cat /proc/cpuinfo
Processor	: ARMv7 Processor rev 8 (v7l)
processor	: 0
BogoMIPS	: 1990.65

processor	: 1
BogoMIPS	: 1990.65

Features	: swp half thumb fastmult vfp edsp neon vfpv3 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x2
CPU part	: 0xc09
CPU revision	: 8

Hardware	: Samsung SDP1106 evaluation board
Revision	: 0000
Serial		: 0000000000000000
i hope it will help a bit.

Mfg

ed_2

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by juusso »

Yes, this helped. Same debug module version is used instead of release.
nfs: version magic '0081, release SMP preempt mod_unload ARMv7 ' should be '0081, debug SMP preempt mod_unload ARMv7 '
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

miazza
SamyGO Project Donor
Posts: 732
Joined: Wed Apr 03, 2013 6:10 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by miazza »

juuso wrote:miaza, port 2023
/bin/sh: can't access tty; job control turned off
VDLinux#> /bin/sh: can't access tty; job control turned off
VDLinux#>

it connects but no feedback from commands.
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

hubecker
Posts: 16
Joined: Tue Oct 13, 2009 10:51 pm
Location: Germany

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by hubecker »

Hi juuso,
a report from UE46ES8090 T-ECPDEUC 2005.0:

Virtual USB: OK
SAMBA: not working
FTP: OK
TELNET: OK
Shell web-client: OK
NFS: working
SSH: not working

Code: Select all

Processor       : ARMv7 Processor rev 8 (v7l)
processor       : 0
BogoMIPS        : 1990.65

processor       : 1
BogoMIPS        : 1990.65

Features        : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc09
CPU revision    : 8

Hardware        : Samsung SDP1106 evaluation board
Revision        : 0000
Serial          : 0000000000000000
When i try to load some modules, i get an error:

Code: Select all

VDLinux#> ./03_03_sshd.init start
no mount.ko is loaded. Safe usage of ssh server is impossible. Script exit

VDLinux#> insmod kernel/drivers/pty/mount.ko
insmod: can't insert 'kernel/drivers/pty/mount.ko': invalid module format
VDLinux#> insmod kernel/drivers/pty/devpts.ko
insmod: can't insert 'kernel/drivers/pty/devpts.ko': invalid module format
VDLinux#> insmod /mnt/lib/modules/2.6.35.13/kernel/fs/cifs/cifs.ko
insmod: can't insert '/mnt/lib/modules/2.6.35.13/kernel/fs/cifs/cifs.ko': invalid module format
other modules also don't worK:

Code: Select all

VDLinux#> insmod 62/2.6.35.13/kernel/drivers/pty/mount.ko
insmod: can't read '62/2.6.35.13/kernel/drivers/pty/mount.ko': No such file or directory

VDLinux#> insmod 64/2.6.35.13/kernel/drivers/pty/mount.ko
insmod: can't insert '64/2.6.35.13/kernel/drivers/pty/mount.ko': invalid module format
Regards
Hubert
TV: UE46ES8090 T-ECPDEUC-2007.0

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: [Testing] Update2: E series widget -autostart w/o USB

Post by juusso »

Code: Select all

cat /.version
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Locked

Return to “[E] Software”