Made mistake in user.sh patched BD-D7500B wont boot

User avatar
arris69
SamyGO Moderator
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: Made mistake in user.sh patched BD-D7500B wont boot

Post by arris69 » Wed Jan 30, 2013 8:49 am

alessio71 wrote:Please, let me ask you one last question:
woldn't be possible to launch a copy of the new firmware (unpacked and exeDSP patched) from the usb? Using the run.sh hotplug feature?
the problem is that exeDSP resets the usb ports on launch, so you need to "path-out" this also in your version.
before you ask, no i don't know where you have to hexedit it. :-(
I know it sound difficult but at least I don't risk (and I don't want to) to brick my BD...
a bit confused, do you have now a patchwd firmware flashed or not?
Thank you again,
Alessio

P.S.
Isn't possbile yet to use an USB keyboard connected to the BD? I see that all the imput modules for usb are missing...

Code: Select all

insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/input/usbhid.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/hid/hid.ko': unknown symbol in module, or unknown parameter
the modules aren't missing, then you can see the message that it can't be loaded...
what is the output of?:

Code: Select all

dmesg

User avatar
arris69
SamyGO Moderator
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: Made mistake in user.sh patched BD-D7500B wont boot

Post by arris69 » Wed Jan 30, 2013 2:34 pm

lewy20041 wrote:

ok i checkd and run.sh is ranning at the start up. can anyone put a script for me to autoupdate to orginall firmware from usb?
why not simply try to clean /mtd_rwarea ?

lewy20041
Posts: 27
Joined: Mon Jan 28, 2013 8:36 pm

Re: Made mistake in user.sh patched BD-D7500B wont boot

Post by lewy20041 » Wed Jan 30, 2013 3:28 pm

arris69 wrote:
lewy20041 wrote:

ok i checkd and run.sh is ranning at the start up. can anyone put a script for me to autoupdate to orginall firmware from usb?
why not simply try to clean /mtd_rwarea ?
what do you mean by auto clean? delete files from that directory? if i do that i lose even the run.sh autostart didnt i?
the firmware i instaled is for difrent model right. so how i cen revert back using only run.sh i dont have video output from bd player on my tv so i cant update by menu.
if any one know something please help
im a noob in this

User avatar
juusso
SamyGO Moderator
Posts: 9759
Joined: Sun Mar 07, 2010 6:20 pm

Re: Made mistake in user.sh patched BD-D7500B wont boot

Post by juusso » Wed Jan 30, 2013 3:51 pm

I created topic for your problem. Further support here.
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

alessio71
Posts: 39
Joined: Wed Sep 26, 2012 8:47 pm

Re: Made mistake in user.sh patched BD-D7500B wont boot

Post by alessio71 » Wed Jan 30, 2013 6:28 pm

arris69 wrote:the problem is that exeDSP resets the usb ports on launch, so you need to "path-out" this also in your version.
before you ask, no i don't know where you have to hexedit it. :-(
Ok, I won't ask :)
arris69 wrote:
I know it sound difficult but at least I don't risk (and I don't want to) to brick my BD...
a bit confused, do you have now a patchwd firmware flashed or not?
Yes, i'm running a patched FW. juuso told me that to launch a newer version of exeDSP I have to have the WHOLE same FW running. I don't want to mess YOUR FW to prevent the brick of the BD (just I did two weeks ago), that's why I asked you about a launch from a much safer place like an external USB key.
arris69 wrote: the modules aren't missing, then you can see the message that it can't be loaded...
what is the output of?:

Code: Select all

dmesg
Here the result of the command:
SpoilerShow

Code: Select all

t registers
ohci-sdp ohci-sdp.0: control 0x083 HCFS=operational CBSR=3
ohci-sdp ohci-sdp.0: cmdstatus 0x00000 SOC=0
ohci-sdp ohci-sdp.0: intrstatus 0x00000004 SF
ohci-sdp ohci-sdp.0: intrenable 0x8000001a MIE UE RD WDH
ohci-sdp ohci-sdp.0: hcca frame #0003
ohci-sdp ohci-sdp.0: roothub.a 02000201 POTPGT=2 NPS NDP=1(1)
ohci-sdp ohci-sdp.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci-sdp ohci-sdp.0: roothub.status 00008000 DRWE
ohci-sdp ohci-sdp.0: roothub.portstatus [0] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: SDP On-chip OHCI Host controller
usb usb3: Manufacturer: Linux 2.6.30.9 ohci_hcd
usb usb3: SerialNumber: ohci-sdp
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 4ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ohci-sdp ohci-sdp.0: ohci_hcd c6d0e400, irq 22 mem 30078000~30078100
ohci-sdp ohci-sdp.0: ohci-sdp probing completed.
hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ohci-sdp ohci-sdp.1: SDP_OHCI ioremapped : C83A4000
ohci-sdp ohci-sdp.1: SDP On-chip OHCI Host controller
drivers/usb/core/inode.c: creating file '004'
ohci-sdp ohci-sdp.1: new USB bus registered, assigned bus number 4
ohci-sdp ohci-sdp.1: irq 23, io mem 0x30088000
ehci-sdp ehci-sdp.1: port 1 high speed
ehci-sdp ehci-sdp.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
ohci-sdp ohci-sdp.1: OHCI controller state
ohci-sdp ohci-sdp.1: OHCI 1.0, NO legacy support registers
ohci-sdp ohci-sdp.1: control 0x083 HCFS=operational CBSR=3
ohci-sdp ohci-sdp.1: cmdstatus 0x00000 SOC=0
ohci-sdp ohci-sdp.1: intrstatus 0x00000004 SF
ohci-sdp ohci-sdp.1: intrenable 0x8000001a MIE UE RD WDH
ohci-sdp ohci-sdp.1: hcca frame #0003
ohci-sdp ohci-sdp.1: roothub.a 02000201 POTPGT=2 NPS NDP=1(1)
ohci-sdp ohci-sdp.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci-sdp ohci-sdp.1: roothub.status 00008000 DRWE
ohci-sdp ohci-sdp.1: roothub.portstatus [0] 0x00000100 PPS
usb usb4: default language 0x0409
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: SDP On-chip OHCI Host controller
usb usb4: Manufacturer: Linux 2.6.30.9 ohci_hcd
usb usb4: SerialNumber: ohci-sdp
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: global over-current protection
hub 4-0:1.0: power on to power good time: 4ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 4-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ohci-sdp ohci-sdp.1: ohci_hcd c6d0f800, irq 23 mem 30088000~30088100
ohci-sdp ohci-sdp.1: ohci-sdp probing completed.
====================================================================
[SELP] ohci_hcd module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
usb 2-1: new high speed USB device using ehci-sdp and address 2
====================================================================
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
ehci-sdp ehci-sdp.1: port 1 high speed
ehci-sdp ehci-sdp.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
USB Mass Storage support registered.
====================================================================
[SELP] usb_storage module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
====================================================================
usb 2-1: default language 0x0409
usb 2-1: New USB device found, idVendor=04e8, idProduct=206c
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
drivers/usb/core/inode.c: creating file '002'
hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000
ohci-sdp ohci-sdp.0: auto-stop root hub
ohci-sdp ohci-sdp.1: auto-stop root hub
Ker 3DMode 0
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
scsi_eh_0: flush finish cmd: c761f140
sdp GMAC 10/100M network driver ver 0.9591
[SDP MAC] Firenze revision 1
[SDP MAC]Find SDP GMAC ver 1034
[SDP MAC]Find RTL8201E Phy Device
emac busMode 20101
[SDP MAC]eth%d: Set 100MBps
[SDP MAC]eth0: Invalid ethernet MAC address. Please set using ifconfig
[SDP MAC]eth0: IRQ is 16
====================================================================
[SELP] sdp_mac module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
====================================================================
[SDP MAC]eth0: Ethernet address 00:23:99:fc:2b:ab
[CIP_KERNEL] /dev/mmcblk0p3
[CIP_KERNEL] 20449 is authuld length : file open success(rootfs)
[CIP_KERNEL] /bin/authuld can read  (after=0)
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
[CIP_KERNEL] authentication success!!!
[CIP_KERNEL] Success!! Authuld is successfully completed.
##### send signal from USER, SIG : 9, killall(376)->authuld(373) sys_kill
##### send signal from USER, SIG : 9, killall(376)->???(374) sys_kill
eth0: link down
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbserial_generic 2-1:1.0: usb_probe_interface
usbserial_generic 2-1:1.0: usb_probe_interface - got id
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
====================================================================
[SELP] usbserial module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
====================================================================
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[SDP MAC]eth0: Set 100MBps, full-duplex
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
====================================================================
[SELP] ftdi_sio module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] bcm_usbshim module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
====================================================================
[BROADCOM WIFI DRIVER] Jul  5 2011 12:21:24 version 5.100.68.36
wl_module_init: msglevel set to 0x1
wl_module_init: msglevel2 set to 0x0
dbus_usbdev 2-1:1.0: usb_probe_interface
dbus_usbdev 2-1:1.0: usb_probe_interface - got id
high speed device detected
wl_dbus_probe_cb:
dbus_usb_dlneeded: chip 0xa8e4 rev 0x2
dbus_usb_dlrun: Issue DL_GO
dbus_usb_resetcfg: download done 200 ms chip 0xa123 rev 0x1
bcm_rpc_up: waiting to be connected
bcm_rpc_buf_recv_mgn_high: Recvd:3 Version: 0x5644424
State: 3 Session:105
bcm_rpc_buf_recv_mgn_high: Reason: 0 Dongle Version: 0x5644424
bcm_rpc_buf_recv_mgn_high: Connected!
wl0: wlc_stf_txcore_shmem_write: No clock
bcm0 (): not using net_device_ops yet
bcm0: Broadcom BCMa8e4 802.11 Wireless Controller 5.100.68.36 (Compiled in /home6/ym2.jang/D7500_Release/AP_CherryMW/AP_CherrySS/WIFIDriverSource/BCM/kirin_rel_68_36/src at 12:21:24 on Jul  5 2011)



[BROADCOM WIFI DRIVER] Driver Source Date : 20110405


wl0: wlc_if_event - ifdix 0, opcode 4, role 0 ***
usbcore: registered new interface driver dbus_usbdev
= wl_module_init
====================================================================
[SELP] wl module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )
====================================================================
wl_iw_event[line: 4671] : [WLC_E_IF] status[0], reason[0], pre status = 0
wl_iw_event: **** event_data ifidx 0, opcode 4, bssidx 0 ***
====================================================================
[SELP] evdev module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
====================================================================
[SELP] usbhid module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
dummy_hcd dummy_hcd: USB Host+Gadget Emulator, driver 02 May 2005
dummy_hcd dummy_hcd: Dummy host controller
drivers/usb/core/inode.c: creating file '005'
dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 5
usb usb5: default language 0x0409
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: Dummy host controller
usb usb5: Manufacturer: Linux 2.6.30.9 dummy_hcd
usb usb5: SerialNumber: dummy_hcd
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: individual port power switching
hub 5-0:1.0: global over-current protection
hub 5-0:1.0: power on to power good time: 0ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: no over-current condition exists
hub 5-0:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '001'
====================================================================
[SELP] dummy_hcd module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
hub 5-0:1.0: state 7 ports 1 chg 0000 evt 0000
g_file_storage gadget: File-backed for SamyGO, version: 20 November 2008
g_file_storage gadget: Number of LUNs=1
g_file_storage gadget-lun0: ro=0, file: /dtv/vusb
hub 5-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
====================================================================
[SELP] g_file_storage module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 5-1: new high speed USB device using dummy_hcd and address 2
usb 5-1: default language 0x0409
usb 5-1: New USB device found, idVendor=0525, idProduct=a4a5
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: File-backed for SamyGO
usb 5-1: Manufacturer: SamyGO
usb 5-1: SerialNumber: 3230204E6F76
usb 5-1: usb_probe_device
usb 5-1: configuration #1 chosen from 1 choice
g_file_storage gadget: high speed config #1
usb 5-1: adding 5-1:1.0 (config #1, interface 0)
usb-storage 5-1:1.0: usb_probe_interface
usb-storage 5-1:1.0: usb_probe_interface - got id
scsi2 : SCSI emulation for USB Mass Storage devices
drivers/usb/core/inode.c: creating file '002'
hub 5-0:1.0: state 7 ports 1 chg 0000 evt 0002
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access     Linux    SamyGO Virt. USB 0302 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 2:0:0:0: [sda] 1000 512-byte hardware sectors: (512 kB/500 KiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through

##### Create readahead proc: sda
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda:
sd 2:0:0:0: [sda] Attached SCSI disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
fuse init (API version 7.11)
====================================================================
[SELP] fuse module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
====================================================================
[SELP] sunrpc module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] lockd module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] nfs module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
====================================================================
[SELP] bluetooth module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
====================================================================
[SELP] l2cap module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
====================================================================
[SELP] rfcomm module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
====================================================================
[SELP] bnep module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
====================================================================
[SELP] hidp module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] cifs module load!!(1008_276 RELEASE preempt mod_unload ARMv7 )
====================================================================
CIFS: Unknown mount option codepage
CIFS: Unknown mount option codepage
CIFS: Unknown mount option codepage
CIFS: Unknown mount option codepage
CIFS: Unknown mount option codepage
rpc uptime 1 minutes
rpc uptime 2 minutes
rpc uptime 3 minutes

Thank you,
Alessio

Post Reply

Return to “Support”