[How-To] Remote Control Signal Over Lan?

Here are software that related with Samsung B series TVs. Like hex editors, new version of BusyBox or internal software, app programs that will run in your TV hardware.:!:This forum is NOT FOR USER QUESTIONS or Problems.

nescha
Posts: 30
Joined: Mon Jan 03, 2011 11:03 am

Re: Remote Control Signal Over Lan?

Post by nescha »

moras86, nice app, works like a charm.

geo650, I wanted to ask, since I saw you mentioned remapping of FAV.CH to HDMI, how this can be expanded for additional customization? I couldn't find an easy way to do it by reading this thread or http://forum.samygo.tv/viewtopic.php?f= ... 9501#p8226.

Is solution connected to changing keyconfig.info and remoconfig.info http://forum.samygo.tv/viewtopic.php?f= ... fig#p10109

My goals are:
1. Direct SRC (eg. HDMI1)
2. PIP
3. Aspect Ratio
4. Audio Mode
5. Video Mode
6. Additional custom system events or user-defined commands (like in MyButtons)

I installed PVR/PVR+ and it covers 1. and 2. or 3, but I'm aiming at more advanced feature

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: Remote Control Signal Over Lan?

Post by juusso »

sbav1, it works, no more putty!
We are waiting for next version, moras86
i`m going to play with it too a bit ;)
Here is source with changed functions with code of sbav1 (no more putty needed)

Code: Select all

#cs ----------------------------------------------------------------------------

 AutoIt Version: 3.3.6.1
 Author: moras86

 Function: Samsung TV - PC Remote

#ce ----------------------------------------------------------------------------

#include <GUIConstantsEx.au3>
Opt('MustDeclareVars', 0)

Global $IPaddr, $keycode
$IPaddr = IniRead(@ScriptDir & "\rctest.ini", "connect", "ip", "NotFound")

If $IPaddr = "NotFound" Then
    MsgBox(4112, "Error", "Cant find IP address in .ini file")
    Exit
Endif

HotKeySet("{END}", "koniec")

Opt("GUIOnEventMode",1)
GUICreate("Remote LAN Control :: Samsung", 350, 525)
GuiSetOnEvent($GUI_EVENT_CLOSE, "koniec")


$btn_power = GUICtrlCreateButton("Power OFF", 10, 10, 60, 25)
GUICtrlSetOnEvent($btn_Power, "key_power")

$btn_tv = GUICtrlCreateButton("TV", 10, 35, 60, 25)
GUICtrlSetOnEvent($btn_tv, "key_tv")

$btn_1 = GUICtrlCreateButton("1", 10, 60, 60, 25)
GUICtrlSetOnEvent($btn_1, "key_1")
$btn_2 = GUICtrlCreateButton("2", 70, 60, 60, 25)
GUICtrlSetOnEvent($btn_2, "key_2")
$btn_3 = GUICtrlCreateButton("3", 130, 60, 60, 25)
GUICtrlSetOnEvent($btn_3, "key_3")

$btn_4 = GUICtrlCreateButton("4", 10, 85, 60, 25)
GUICtrlSetOnEvent($btn_4, "key_4")
$btn_5 = GUICtrlCreateButton("5", 70, 85, 60, 25)
GUICtrlSetOnEvent($btn_5, "key_5")
$btn_6 = GUICtrlCreateButton("6", 130, 85, 60, 25)
GUICtrlSetOnEvent($btn_6, "key_6")

$btn_7 = GUICtrlCreateButton("7", 10, 110, 60, 25)
GUICtrlSetOnEvent($btn_7, "key_7")
$btn_8 = GUICtrlCreateButton("8", 70, 110, 60, 25)
GUICtrlSetOnEvent($btn_8, "key_8")
$btn_9 = GUICtrlCreateButton("9", 130, 110, 60, 25)
GUICtrlSetOnEvent($btn_9, "key_9")

$btn_favch = GUICtrlCreateButton("FAV.CH", 10, 135, 60, 25)
GUICtrlSetOnEvent($btn_favch, "key_favch")
$btn_0 = GUICtrlCreateButton("0", 70, 135, 60, 25)
GUICtrlSetOnEvent($btn_0, "key_0")
$btn_prech = GUICtrlCreateButton("PRE-CH", 130, 135, 60, 25)
GUICtrlSetOnEvent($btn_prech, "key_prech")

$btn_volup = GUICtrlCreateButton("VOL +", 10, 165, 60, 25)
GUICtrlSetOnEvent($btn_volup, "key_volup")
$btn_mute = GUICtrlCreateButton("MUTE", 70, 165, 60, 25)
GUICtrlSetOnEvent($btn_mute, "key_mute")
$btn_chup = GUICtrlCreateButton("CH +", 130, 165, 60, 25)
GUICtrlSetOnEvent($btn_chup, "key_chup")

$btn_voldn = GUICtrlCreateButton("VOL -", 10, 190, 60, 25)
GUICtrlSetOnEvent($btn_voldn, "key_voldn")
$btn_source = GUICtrlCreateButton("SOURCE", 70, 190, 60, 25)
GUICtrlSetOnEvent($btn_source, "key_source")
$btn_chdn = GUICtrlCreateButton("CH -", 130, 190, 60, 25)
GUICtrlSetOnEvent($btn_chdn, "key_chdn")

$btn_info = GUICtrlCreateButton("INFO", 10, 220, 60, 25)
GUICtrlSetOnEvent($btn_info, "key_info")
$btn_menu = GUICtrlCreateButton("MENU", 70, 220, 60, 35)
GUICtrlSetOnEvent($btn_menu, "key_menu")
$btn_guide = GUICtrlCreateButton("GUIDE", 130, 220, 60, 25)
GUICtrlSetOnEvent($btn_guide, "key_guide")

$btn_tools = GUICtrlCreateButton("TOOLS", 10, 245, 60, 25)
GUICtrlSetOnEvent($btn_tools, "key_tools")
$btn_return = GUICtrlCreateButton("RETURN", 130, 245, 60, 25)
GUICtrlSetOnEvent($btn_return, "key_return")

$btn_enter = GUICtrlCreateButton("ENTER", 75, 290, 50, 50)
GUICtrlSetOnEvent($btn_enter, "key_enter")
$btn_up = GUICtrlCreateButton("^", 70, 265, 60, 20)
GUICtrlSetOnEvent($btn_up, "key_up")
$btn_left = GUICtrlCreateButton("<", 50, 285, 20, 60)
GUICtrlSetOnEvent($btn_left, "key_left")
$btn_right = GUICtrlCreateButton(">", 130, 285, 20, 60)
GUICtrlSetOnEvent($btn_right, "key_right")
$btn_down = GUICtrlCreateButton("v", 70, 345, 60, 20)
GUICtrlSetOnEvent($btn_down, "key_down")

$btn_internet = GUICtrlCreateButton("INTERNET", 10, 355, 60, 25)
GUICtrlSetOnEvent($btn_internet, "key_internet")
$btn_exit = GUICtrlCreateButton("EXIT", 130, 355, 60, 25)
GUICtrlSetOnEvent($btn_exit, "key_exit")

$btn_red = GUICtrlCreateButton("R", 10, 385, 45, 25)
GUICtrlSetOnEvent($btn_red, "key_red")
$btn_green = GUICtrlCreateButton("G", 55, 385, 45, 25)
GUICtrlSetOnEvent($btn_green, "key_green")
$btn_yellow = GUICtrlCreateButton("Y", 100, 385, 45, 25)
GUICtrlSetOnEvent($btn_yellow, "key_yellow")
$btn_blue = GUICtrlCreateButton("B", 145, 385, 45, 25)
GUICtrlSetOnEvent($btn_blue, "key_blue")

$btn_ttx = GUICtrlCreateButton("TTX/MIX", 10, 415, 60, 25)
GUICtrlSetOnEvent($btn_ttx, "key_ttx")
$btn_media = GUICtrlCreateButton("MEDIA.P", 70, 415, 60, 25)
GUICtrlSetOnEvent($btn_media, "key_media")
$btn_content = GUICtrlCreateButton("CONTENT", 130, 415, 60, 25)
GUICtrlSetOnEvent($btn_content, "key_content")

$btn_chlist = GUICtrlCreateButton("CH LIST", 10, 440, 60, 25)
GUICtrlSetOnEvent($btn_chlist, "key_chlist")
$btn_ad = GUICtrlCreateButton("AD", 70, 440, 60, 25)
GUICtrlSetOnEvent($btn_ad, "key_ad")
$btn_subt = GUICtrlCreateButton("SUBT.", 130, 440, 60, 25)
GUICtrlSetOnEvent($btn_subt, "key_subt")

$btn_fb= GUICtrlCreateButton("<<", 10, 465, 60, 25)
GUICtrlSetOnEvent($btn_fb, "key_fb")
$btn_pause = GUICtrlCreateButton("| |", 70, 465, 60, 25)
GUICtrlSetOnEvent($btn_pause, "key_pause")
$btn_ff = GUICtrlCreateButton(">>", 130, 465, 60, 25)
GUICtrlSetOnEvent($btn_ff, "key_ff")

$btn_rec = GUICtrlCreateButton("REC ( )", 10, 490, 60, 25)
GUICtrlSetOnEvent($btn_rec, "key_rec")
$btn_play = GUICtrlCreateButton("PLAY >", 70, 490, 60, 25)
GUICtrlSetOnEvent($btn_play, "key_play")
$btn_stop = GUICtrlCreateButton("STOP [ ]", 130, 490, 60, 25)
GUICtrlSetOnEvent($btn_stop, "key_stop")

GuiCtrlCreateGroup("Extra keys", 198, 10, 145, 125)
	$btn_dvb = GUICtrlCreateButton("DVB signal", 205, 25, 65, 25)
	GUICtrlSetOnEvent($btn_dvb, "key_dvb")
	$btn_sleep = GUICtrlCreateButton("Sleep", 270, 25, 65, 25)
	GUICtrlSetOnEvent($btn_sleep, "key_sleep")
	$btn_pip = GUICtrlCreateButton("PIP", 205, 50, 65, 25)
	GUICtrlSetOnEvent($btn_pip, "key_pip")
	$btn_psize = GUICtrlCreateButton("Picture size", 270, 50, 65, 25)
	GUICtrlSetOnEvent($btn_psize, "key_psize")
	$btn_smode = GUICtrlCreateButton("Sound mode", 205, 75, 65, 25)
	GUICtrlSetOnEvent($btn_smode, "key_smode")
	$btn_srs = GUICtrlCreateButton("SRS on/off", 270, 75, 65, 25)
	GUICtrlSetOnEvent($btn_srs, "key_srs")
	$btn_energy = GUICtrlCreateButton("Energy save", 205, 100, 65, 25)
	GUICtrlSetOnEvent($btn_energy, "key_energy")
GUICtrlCreateGroup ("",-99,-99,1,1)

GuiCtrlCreateGroup("Picture mode", 198, 140, 145, 125)
	$btn_pmode = GUICtrlCreateButton("Swich mode", 205, 155, 65, 25)
	GUICtrlSetOnEvent($btn_pmode, "key_pmode")
	$btn_p_user1 = GUICtrlCreateButton("User 1", 270, 155, 65, 25)
	GUICtrlSetOnEvent($btn_p_user1, "key_p_user1")
	$btn_p_dynamic = GUICtrlCreateButton("Dynamic", 205, 180, 65, 25)
	GUICtrlSetOnEvent($btn_p_dynamic, "key_p_dynamic")
	$btn_p_user2 = GUICtrlCreateButton("User 2", 270, 180, 65, 25)
	GUICtrlSetOnEvent($btn_p_user2, "key_p_user2")
	$btn_p_standard = GUICtrlCreateButton("Standard", 205, 205, 65, 25)
	GUICtrlSetOnEvent($btn_p_standard, "key_p_standard")
	$btn_p_user3 = GUICtrlCreateButton("User 3", 270, 205, 65, 25)
	GUICtrlSetOnEvent($btn_p_user3, "key_p_user3")
	$btn_p_movie = GUICtrlCreateButton("Movie", 205, 230, 65, 25)
	GUICtrlSetOnEvent($btn_p_movie, "key_p_movie")
	$btn_p_movie2 = GUICtrlCreateButton("Movie 2", 270, 230, 65, 25)
	GUICtrlSetOnEvent($btn_p_movie2, "key_p_movie2")
GUICtrlCreateGroup ("",-99,-99,1,1)

GuiCtrlCreateGroup("Aspect ratio", 198, 270, 145, 50)
	$btn_aspect43 = GUICtrlCreateButton("4:3", 205, 285, 65, 25)
	GUICtrlSetOnEvent($btn_aspect43, "key_aspect43")
	$btn_aspect169 = GUICtrlCreateButton("16:9", 270, 285, 65, 25)
	GUICtrlSetOnEvent($btn_aspect169, "key_aspect169")
GUICtrlCreateGroup ("",-99,-99,1,1)

GuiCtrlCreateGroup("Direct source", 198, 325, 145, 125)
	$btn_s_scart1 = GUICtrlCreateButton("Scart 1", 205, 340, 65, 25)
	GUICtrlSetOnEvent($btn_s_scart1, "key_s_scart1")
	$btn_s_hdmi1 = GUICtrlCreateButton("HDMI 1", 270, 340, 65, 25)
	GUICtrlSetOnEvent($btn_s_hdmi1, "key_s_hdmi1")
	$btn_s_scart2 = GUICtrlCreateButton("Scart 2", 205, 365, 65, 25)
	GUICtrlSetOnEvent($btn_s_scart2, "key_s_scart2")
	$btn_s_hdmi2 = GUICtrlCreateButton("HDMI 2", 270, 365, 65, 25)
	GUICtrlSetOnEvent($btn_s_hdmi2, "key_s_hdmi2")
	$btn_s_component = GUICtrlCreateButton("Component", 205, 390, 65, 25)
	GUICtrlSetOnEvent($btn_s_component, "key_s_component")
	$btn_s_vga = GUICtrlCreateButton("VGA (PC)", 270, 390, 65, 25)
	GUICtrlSetOnEvent($btn_s_vga, "key_s_vga")
	$btn_s_av = GUICtrlCreateButton("Composite", 205, 415, 65, 25)
	GUICtrlSetOnEvent($btn_s_av, "key_s_av")
	$btn_s_hdmi4 = GUICtrlCreateButton("HDMI 4", 270, 415, 65, 25)
	GUICtrlSetOnEvent($btn_s_hdmi4, "key_s_hdmi4")
GUICtrlCreateGroup ("",-99,-99,1,1)

GuiCtrlCreateLabel("Remote LAN Control", 220, 468)
GuiCtrlSetColor(-1,0xaaa)
GuiCtrlCreateLabel("version: 0.01 beta", 220, 480)
GuiCtrlSetColor(-1,0xaaa)
GuiCtrlCreateLabel("by moras86", 264, 495)

GuiSetIcon("icon.ico", 0)
GUISetState()

While 1
   Sleep(100)
WEnd

Func key_power()
$keycode = "2"
SendKeycode($keycode)
EndFunc

Func key_tv()
$keycode = "27"
SendKeycode($keycode)
EndFunc

Func key_1()
$keycode = "4"
SendKeycode($keycode)
EndFunc

Func key_2()
$keycode = "5"
SendKeycode($keycode)
EndFunc

Func key_3()
$keycode = "6"
SendKeycode($keycode)
EndFunc

Func key_4()
$keycode = "8"
SendKeycode($keycode)
EndFunc

Func key_5()
$keycode = "9"
SendKeycode($keycode)
EndFunc

Func key_6()
$keycode = "10"
SendKeycode($keycode)
EndFunc

Func key_7()
$keycode = "11"
SendKeycode($keycode)
EndFunc

Func key_8()
$keycode = "13"
SendKeycode($keycode)
EndFunc

Func key_9()
$keycode = "14"
SendKeycode($keycode)
EndFunc

Func key_0()
$keycode = "17"
SendKeycode($keycode)
EndFunc

Func key_favch()
$keycode = "68"
SendKeycode($keycode)
EndFunc

Func key_prech()
$keycode = "19"
SendKeycode($keycode)
EndFunc

Func key_volup()
$keycode = "7"
SendKeycode($keycode)
EndFunc

Func key_voldn()
$keycode = "11"
SendKeycode($keycode)
EndFunc

Func key_chup()
$keycode = "18"
SendKeycode($keycode)
EndFunc

Func key_chdn()
$keycode = "16"
SendKeycode($keycode)
EndFunc

Func key_mute()
$keycode = "15"
SendKeycode($keycode)
EndFunc

Func key_source()
$keycode = "1"
SendKeycode($keycode)
EndFunc

Func key_info()
$keycode = "31"
SendKeycode($keycode)
EndFunc

Func key_tools()
$keycode = "75"
SendKeycode($keycode)
EndFunc

Func key_guide()
$keycode = "79"
SendKeycode($keycode)
EndFunc

Func key_return()
$keycode = "88"
SendKeycode($keycode)
EndFunc

Func key_menu()
$keycode = "26"
SendKeycode($keycode)
EndFunc

Func key_enter()
$keycode = "104"
SendKeycode($keycode)
EndFunc

Func key_up()
$keycode = "96"
SendKeycode($keycode)
EndFunc

Func key_down()
$keycode = "97"
SendKeycode($keycode)
EndFunc

Func key_left()
$keycode = "101"
SendKeycode($keycode)
EndFunc

Func key_right()
$keycode = "98"
SendKeycode($keycode)
EndFunc

Func key_internet()
$keycode = "147"
SendKeycode($keycode)
EndFunc

Func key_exit()
$keycode = "45"
SendKeycode($keycode)
EndFunc

Func key_red()
$keycode = "108"
SendKeycode($keycode)
EndFunc

Func key_green()
$keycode = "20"
SendKeycode($keycode)
EndFunc

Func key_yellow()
$keycode = "21"
SendKeycode($keycode)
EndFunc

Func key_blue()
$keycode = "22"
SendKeycode($keycode)
EndFunc

Func key_ttx()
$keycode = "44"
SendKeycode($keycode)
EndFunc

Func key_media()
$keycode = "140"
SendKeycode($keycode)
EndFunc

Func key_content()
$keycode = "121"
SendKeycode($keycode)
EndFunc

Func key_chlist()
$keycode = "107"
SendKeycode($keycode)
EndFunc

Func key_ad()
$keycode = "0"
SendKeycode($keycode)
EndFunc

Func key_subt()
$keycode = "37"
SendKeycode($keycode)
EndFunc

Func key_fb()
$keycode = "69"
SendKeycode($keycode)
EndFunc

Func key_pause()
$keycode = "74"
SendKeycode($keycode)
EndFunc

Func key_ff()
$keycode = "72"
SendKeycode($keycode)
EndFunc

Func key_rec()
$keycode = "73"
SendKeycode($keycode)
EndFunc

Func key_play()
$keycode = "71"
SendKeycode($keycode)
EndFunc

Func key_stop()
$keycode = "70"
SendKeycode($keycode)
EndFunc


Func key_dvb()
$keycode = "45"
SendKeycode($keycode)
sleep("700")
$keycode = "26"
SendKeycode($keycode)
sleep("700")
$keycode = "96"
SendKeycode($keycode)
sleep("700")
$keycode = "104"
SendKeycode($keycode)
sleep("700")
$keycode = "97"
SendKeycode($keycode)
sleep("700")
$keycode = "104"
SendKeycode($keycode)
sleep("700")
$keycode = "96"
SendKeycode($keycode)
sleep("700")
$keycode = "104"
SendKeycode($keycode)
sleep("700")
EndFunc

Func key_sleep()
$keycode = "1"
SendKeycode($keycode)
EndFunc

Func key_pip()
$keycode = "32"
SendKeycode($keycode)
EndFunc

Func key_psize()
$keycode = "62"
SendKeycode($keycode)
EndFunc

Func key_smode()
$keycode = "43"
SendKeycode($keycode)
EndFunc

Func key_energy()
$keycode = "119"
SendKeycode($keycode)
EndFunc

Func key_srs()
$keycode = "110"
SendKeycode($keycode)
EndFunc

Func key_pmode()
$keycode = "40"
SendKeycode($keycode)
EndFunc

Func key_p_dynamic()
$keycode = "189"
SendKeycode($keycode)
EndFunc

Func key_p_standard()
$keycode = "223"
SendKeycode($keycode)
EndFunc

Func key_p_movie()
$keycode = "222"
SendKeycode($keycode)
EndFunc

Func key_p_user1()
$keycode = "220"
SendKeycode($keycode)
EndFunc

Func key_p_user2()
$keycode = "219"
SendKeycode($keycode)
EndFunc

Func key_p_user3()
$keycode = "218"
SendKeycode($keycode)
EndFunc

Func key_p_movie2()
$keycode = "221"
SendKeycode($keycode)
EndFunc

Func key_aspect43()
$keycode = "227"
SendKeycode($keycode)
EndFunc

Func key_aspect169()
$keycode = "228"
SendKeycode($keycode)
EndFunc

Func key_s_scart1()
$keycode = "132"
SendKeycode($keycode)
EndFunc

Func key_s_scart2()
$keycode = "235"
SendKeycode($keycode)
EndFunc

Func key_s_component()
$keycode = "134"
SendKeycode($keycode)
EndFunc

Func key_s_av()
$keycode = "236"
SendKeycode($keycode)
EndFunc

Func key_s_vga()
$keycode = "105"
SendKeycode($keycode)
EndFunc

Func key_s_hdmi1()
$keycode = "233"
SendKeycode($keycode)
EndFunc

Func key_s_hdmi2()
$keycode = "190"
SendKeycode($keycode)
EndFunc

Func key_s_hdmi4()
$keycode = "197"
SendKeycode($keycode)
EndFunc

Func SendKeycode($keycode)
    Local $sc

    TCPStartup()
    While 1
        $sc = TCPConnect($IPaddr, 2345)
        If @error Then
            MsgBox(4112, "Error", "TCPConnect failed with WSA error: " & @error)
            ExitLoop
        Endif
        TCPSend($sc, $keycode & @LF)
        TCPCloseSocket($sc)
        ExitLoop
    WEnd
    TCPShutdown()
EndFunc

Func koniec()
   Exit
EndFunc
Function key_dvb() is cool, i left sleep 700 ms, but i think time depends from CPU load and may varry. I think it is good to add user-defined functions (vote for most wanted functions?)
key_source() = key_sleep(), the same code "1" ?
added guide key.

To-Do
gui for IP address input.
more flexible (virtual drop-down submenu on menu press button?)
colored buttons
user functions
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

moras86
Official SamyGO Developer
Posts: 180
Joined: Sun Feb 21, 2010 3:18 pm
Location: Poland
Contact:

Remote LAN Control (v0.2.5) - Desktop app

Post by moras86 »

New version available :D

Change list for v0.2.1:
- replace PuTTY apps with sbav1 SendKeyCode function (work perfect, fast, and don't need PuTTY anymore)
- ip is read from config.ini file
- show using ip on app status bar
- add keycode to GUIDE key
- remove Sound Mode button (my TV don't support this code)
- fix some keycodes
- change sequence keys for DVB signal check
- add fast number keys for change channel (eg. when you would go to channel 62 you click '6' and next small button near '2'; this way is little faster than normal)
- change Direct Source ports names
- now when click 'Power OFF' app show message box with OK/Cancel buttons
- new icon :)
- fix PictureSize button
- one button name fix

Image


Download from HERE (source included).

File name: Remote LAN Control (v0.2.1).zip
File size: 482.40 KB
(Source included)


Download from HERE.
Small update for desktop app (v0.2.5):
- fix "fast 0" button
- add user custom keycode button (default hide; see config.ini file)

Remember! To work you need to start this app on TV first.

To do:
- readme documentation
- realistic graphic interface
...

Thanks for:
- sbav1 - for his code part and support
- doodlecz - for TV app
- erdem_ua - for keycodes
Last edited by juusso on Tue Jan 04, 2011 11:08 am, edited 6 times in total.
Reason: Edited to avoid bugy v2.0 download.
Image . Image
TV LCD: Samsung LE40B651T3W (CI) | Internet@TV | fw: 2005 (patched: SamyGO v0.24 + GMT2, ArFIX2, ADFIX) | matrix: SQ04
BluRay: Samsung BD-D5300-ZF | SamsungApps | fw: 1013
Android-Box: Zidoo X8 | Realtek RTD1295 64bit (QuadCore), Mali-T820 GPU, 2 GB RAM, HDMI IN record, Android 6.0 | ZDMC 17.1
my projects: Remote LAN Control - Desktop app (v0.8) | Signal checker for DVB-T (v0.3)

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: Remote Control Signal Over Lan?

Post by juusso »

Thank you ;)
Issue on win7home premium:
I get error "TCPConnect failed with WSA error: 10060"

edited:
OK, i got it working. Problem was IP(forgot to set my ip...) :oops:
PictureSize togles picture settings (standart, natural, movie, dynamic) same as Picture settings
here is an error:

Code: Select all

	$btn_pmode = GUICtrlCreateButton("Picture size", 205, 285, 65, 25)
	GUICtrlSetOnEvent($btn_pmode, "key_pmode")
No more bugs at this time. I like it. I could operate TV from my work while wife is watching :D
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

moras86
Official SamyGO Developer
Posts: 180
Joined: Sun Feb 21, 2010 3:18 pm
Location: Poland
Contact:

Remote LAN Control (v0.2.1) - Desktop app

Post by moras86 »

Small update:
- fix PictureSize button
- one button name fix

File name: Remote LAN Control (v0.2.1).zip
File size: 482.40 KB
(Source included)



juuso
Keycodes (in hex) you can find on my page - http://moras86.ugu.pl/samsung/pliki/lista/#Remote - look at bottom-right for link called 'kody'
This is same file like somewhere on this forum.
Image . Image
TV LCD: Samsung LE40B651T3W (CI) | Internet@TV | fw: 2005 (patched: SamyGO v0.24 + GMT2, ArFIX2, ADFIX) | matrix: SQ04
BluRay: Samsung BD-D5300-ZF | SamsungApps | fw: 1013
Android-Box: Zidoo X8 | Realtek RTD1295 64bit (QuadCore), Mali-T820 GPU, 2 GB RAM, HDMI IN record, Android 6.0 | ZDMC 17.1
my projects: Remote LAN Control - Desktop app (v0.8) | Signal checker for DVB-T (v0.3)

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: Remote Control Signal Over Lan?

Post by juusso »

i think you can edit same post for smal fixes, only few people have downloaded it :)
Here is no guide code in the list. Anyway, we do not need it actualy.
Waiting for next releases (anyone can port ir for android???)

You can store IP on windows registry (off course if IP is to set over GUI in next versions)
Small buttons for quick numbers is realy good idea!
I serios recommend call vote for most wanted custom functions, or it is better - let users to add custom function over GUI.
I think you have tested all possible key combinations to get hidden functions, right? we do not need search for it again?

I dream about audio switcher in DTV television... better as ContentLibrary app...

I added remote to my autostart :mrgreen:
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

moras86
Official SamyGO Developer
Posts: 180
Joined: Sun Feb 21, 2010 3:18 pm
Location: Poland
Contact:

Remote LAN Control (v0.2.5) - Desktop app

Post by moras86 »

Small update for desktop app (v0.2.5):
- fix "fast 0" button
- add user custom keycode button (default hide; see config.ini file)

Download from HERE.


Also I would like to add Windows Aero transparent for app background, but I got small problem with all buttons labels. Include second source for it in app archive :roll:
Image . Image
TV LCD: Samsung LE40B651T3W (CI) | Internet@TV | fw: 2005 (patched: SamyGO v0.24 + GMT2, ArFIX2, ADFIX) | matrix: SQ04
BluRay: Samsung BD-D5300-ZF | SamsungApps | fw: 1013
Android-Box: Zidoo X8 | Realtek RTD1295 64bit (QuadCore), Mali-T820 GPU, 2 GB RAM, HDMI IN record, Android 6.0 | ZDMC 17.1
my projects: Remote LAN Control - Desktop app (v0.8) | Signal checker for DVB-T (v0.3)

Post Reply

Return to “[B] Software”