Enabling Internet onUExxB6000 and B550 series

Ideas and dreaming will go this forum
Post Reply

aquadran
Posts: 264
Joined: Fri Oct 16, 2009 9:35 pm
Location: Poland

Re: Enabling Internet onUExxB6000 and B550 series

Post by aquadran »

veberino wrote:I also tried to unsquash mtd_appdata on Laptop and then start samsung sw on TV.

Here's the output of samsung-start.sh
time for testing :)
grab latest oe repo and follow wiki instructions.
i don't know about exeDSP on your tv, it worked in past, maybe it was issue related latest issues.

aquadran
Posts: 264
Joined: Fri Oct 16, 2009 9:35 pm
Location: Poland

Re: Enabling Internet onUExxB6000 and B550 series

Post by aquadran »

veberino wrote:Grabbed latest oe repository, compiled and tried.

Kernel boots fine.
samsung-install.sh now runs fine: it finished with no error.

Starting Samsung software I get some error, nothing appears on tv.

In attach three logs:

install_oe.log first kernel start, sw installation and first try
start_samsug.log restarted tv, and started only samsung sw
original_fw.log log of original (onboard) firmware: started tv and changed channel

Hope it helps
ok, i think i know what it is, i'll build new kernel image for you today.

aquadran
Posts: 264
Joined: Fri Oct 16, 2009 9:35 pm
Location: Poland

Re: Enabling Internet onUExxB6000 and B550 series

Post by aquadran »

aquadran wrote:
veberino wrote:Grabbed latest oe repository, compiled and tried.

Kernel boots fine.
samsung-install.sh now runs fine: it finished with no error.

Starting Samsung software I get some error, nothing appears on tv.

In attach three logs:

install_oe.log first kernel start, sw installation and first try
start_samsug.log restarted tv, and started only samsung sw
original_fw.log log of original (onboard) firmware: started tv and changed channel

Hope it helps
ok, i think i know what it is, i'll build new kernel image for you today.
http://aquadran.users.sourceforge.net/uImage.bz2

i don't know if this will work, if not i'll use old i2c source code from b series.

aquadran
Posts: 264
Joined: Fri Oct 16, 2009 9:35 pm
Location: Poland

Re: Enabling Internet onUExxB6000 and B550 series

Post by aquadran »

veberino wrote:Unfortunately it's not working fine.

In attach the log.
try again

aquadran
Posts: 264
Joined: Fri Oct 16, 2009 9:35 pm
Location: Poland

Re: Enabling Internet onUExxB6000 and B550 series

Post by aquadran »

veberino wrote:Just tried.... we're reaching the target!

kernel loads fine and samsung software starts
Pressing buttons on the remote turns on the TV screen :)

Here's the report of first try:

Channel list is empty (it's not loading the common one) so I change to HDMI1 IN and i can see picture from my sat receiver.
I browsed in TV menus (settings, language, etc)
Tried to start Media player (no success)
TV is not responding quickly, it seems that some commands are not executed.

Second try:
Rebooted TV and started channel search using only DTV aerial search.
After a few second it hanged, picture is corrupted.

Logs are attached.

Thank for your efforts!
settings are stored in /mtd_rwarea so on usb you have empty directory so tv set defaults.
i wonder what happen with media player

Post Reply

Return to “[B] Brainstorm”