2. Are you able to enter to u-boot menu over ExLink?
3. So i understand your main problem is not working USB port and the second - you need samygo.sh after you repair it, right?
Code: Select all
sh +x /mtd_boot/usb
Code: Select all
insmod /lib/modules/fsr.ko insmod /lib/modules/rfs.ko insmod /lib/modules/fsr_stl.ko
Then do step 3 from this manual (with unxored firmware). Skip step1 and step2. You can use firmware file T-CHL5DEUC-2008v24-auto-arfix2-decod.rar from /T-CHL5DEUC-2008.0-v.24-auto-arfix2-net/Step-3
You can place u-boot.bin, Image and onw.bin to this usb to directory /T-CHL5DEUC/image .Files you can get from here (just copy files u-boot.bin, onw.bin and Image from this archive to your upgrade USB)
What you need and what i don`t have - untouched boot.img - maybe you have dump of this bml7? If yes, rename to boot.img and place to /image directory too. After this execute commands in Step3.
Why do you need original boot.img - it is because i think you have modified it(it is in merv07 manual) and you got problems because modified boot.img
I wrote a litle bit chaotic, if something unclear, i can write step by step...
you need exe.img and appdata.img instead .enc
And rename your untouched bml_07 to boot.img and place to USB/T-CHL5DEUC/image next to other images (exe.img, appdata.img, u-boot.bin, onw.bin, Image...and so on.)
This archive is ready for flashing in this way i suggest for you, but your situation requires to add extra files.
if you want, i make full usb for you, just give me your bml_07 dump
Added: Ok, i understand, you got what you should do
Who is online
Users browsing this forum: No registered users and 2 guests