Page 1 of 1

My F5410AW is dead?

Posted: Sun Feb 04, 2018 11:35 am
by jonsbun
Hello,

I tried all ways to fully reset my F5410. However, after TV power off old channel information always came back. When I found INFO – MENU – MUTE – POWER feature and run Upgrade... However, after that my TV looks like totally dead - no red light, can't power on.

Any ideas or solution?

Re: My F5410AW is dead?

Posted: Sun Feb 04, 2018 11:39 am
by juusso
Did you run Upgrade from service menu? I bet it was micom upgrade...
Yes, your TV is dead unless you have programmer and can flash micom firmware via VGA port back to TV. And no guaranty it will work.
Otherwise - mainboard replacement.

Re: My F5410AW is dead?

Posted: Sun Feb 04, 2018 11:42 am
by jonsbun
Yes, from service menu. I just saw "Upgrading"... and nothing more happened. Where I can find information how to fix my TV?

Re: My F5410AW is dead?

Posted: Sun Feb 04, 2018 5:11 pm
by juusso
Search this forum for "Micom upgrade" and you will find your answers.

Re: My F5410AW is dead?

Posted: Fri Apr 13, 2018 8:52 pm
by notengo13
if you still have TV you could try put the firmware on USB and turn on TV maybe is searching for correct files or get from some rooted TV file with name SubMicomEU.bin or something similar and try also with this file. Could be useful or don't, I don't know, I never tried. I have this file on usb stick just for case if something happens

I don't take any responsibility for this is just a suggestion
Factory Settings.jpeg
Software Upgrade.jpeg
submicom upgrade.jpg

Re: My F5410AW is dead?

Posted: Sat Oct 06, 2018 1:53 pm
by jonsbun
notengo13 wrote: Fri Apr 13, 2018 8:52 pm if you still have TV you could try put the firmware on USB and turn on TV maybe is searching for correct files or get from some rooted TV file with name SubMicomEU.bin or something similar and try also with this file. Could be useful or don't, I don't know, I never tried. I have this file on usb stick just for case if something happens

I don't take any responsibility for this is just a suggestion

Factory Settings.jpeg
Software Upgrade.jpeg
submicom upgrade.jpg
Could you upload SubMicomEU.bin here? This file is the same for all bricked TVs?

Re: My F5410AW is dead?

Posted: Sat Oct 06, 2018 9:53 pm
by notengo13
jonsbun wrote: Sat Oct 06, 2018 1:53 pm
notengo13 wrote: Fri Apr 13, 2018 8:52 pm if you still have TV you could try put the firmware on USB and turn on TV maybe is searching for correct files or get from some rooted TV file with name SubMicomEU.bin or something similar and try also with this file. Could be useful or don't, I don't know, I never tried. I have this file on usb stick just for case if something happens

I don't take any responsibility for this is just a suggestion

Factory Settings.jpeg
Software Upgrade.jpeg
submicom upgrade.jpg
Could you upload SubMicomEU.bin here? This file is the same for all bricked TVs?
I have only one from H series and I don't think is same for all TV. I guess is something like "bios" for TV.

Re: My F5410AW is dead?

Posted: Sat Oct 06, 2018 10:03 pm
by jonsbun
Doesn't matter. TV LED is not lighting also. Because I can't find MB, I am planning to use TV LCD panel for future project.