Page 110 of 113

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Thu Dec 21, 2017 7:13 am
by VenimK
I'l give it a test with a official CI+ module this week ...
See what happens or what works

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Thu Nov 01, 2018 11:17 am
by fluffi444
Hey Guys!
I recently switched to Win10 and started PVRD but the GUI is corrupted somehow.
Is it in general not compatile to Win10? Or does anyone have a glue whats going on here?

The general functionality seams to work but Buttons and other things are not visible or....

See screenshot.
PVRD_Win10.png

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Thu Nov 01, 2018 12:01 pm
by zoelechat
No such issue here (just tried on 2 Win10 PCs), looks like some font problem (you used custom one maybe?). Did you upgrade to Win10? If so you should maybe try to delete PVRDecoder reg entry (HKCU\Software\SamyGOPVRDecoder).

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Thu Nov 01, 2018 4:15 pm
by fluffi444
zoelechat wrote: Thu Nov 01, 2018 12:01 pm No such issue here (just tried on 2 Win10 PCs), looks like some font problem (you used custom one maybe?). Did you upgrade to Win10? If so you should maybe try to delete PVRDecoder reg entry (HKCU\Software\SamyGOPVRDecoder).
That was easy! Thx Zoel. After I delete the reg everything is fine!
And yes - Was lazy and did an Win7->Win10 upgrade...

Should learn from this. I noticed some other programs that have some little issues with more strict security and ownership settings of Win10.
Maybe someday an fresh start would be good - But up to now I was suppriesed that this upgrade went almost flawlessly...

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Thu Dec 06, 2018 3:14 pm
by motte
May i switch back to the:

"Unable to retrive xxx.key. No point in continuing copy-process..
Process FAILED somewhere down the road for xxx.srf.
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user." Topic?

SamyGo v1.8.2.53 was working fine for month until some weeks ago. During my encoding to HDD, suddenly this message appears. From this time on, I am not able to use that tool anymore. Suddenly....
I read in the forum about "chmod to 7777" via connecting with Telnet on my TV, where SamyGo is installed, but it doesn´t help. I tried to reinstall SamyGo, to have the origin configuration, but it also does not help.

I do not understand what happened here, because i did not change my running system (no Firmware Updates etc.)
Has someone an idea, what I also can try?

Thx

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Sat Dec 08, 2018 9:42 am
by Zen
I remember, that I had also an issue like that, but not absolutely sure.
Check, if the TV workint tool directory (under Settings -> pahts) is /mtd_rwarea
Changing to this one helped for me.

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Mon Jan 28, 2019 2:04 pm
by Jopardy
motte wrote: Thu Dec 06, 2018 3:14 pm May i switch back to the:

"Unable to retrive xxx.key. No point in continuing copy-process..
Process FAILED somewhere down the road for xxx.srf.
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user." Topic?

SamyGo v1.8.2.53 was working fine for month until some weeks ago. During my encoding to HDD, suddenly this message appears. From this time on, I am not able to use that tool anymore. Suddenly....
I read in the forum about "chmod to 7777" via connecting with Telnet on my TV, where SamyGo is installed, but it doesn´t help. I tried to reinstall SamyGo, to have the origin configuration, but it also does not help.

I do not understand what happened here, because i did not change my running system (no Firmware Updates etc.)
Has someone an idea, what I also can try?

Thx
same my problem yesterday.
never change my pc system and tvsoftware.

reset tv. but problem continued.

what can I do?

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Mon Jan 28, 2019 2:17 pm
by Jopardy
EVREKA. :)

before I delete regedit HKCU\Software\SamyGOPVRDecoder

after I connected tv with filezilla
go to /mtd_rwcommon
I delete ;
libPVRAnyDev
libPVRdumpkeys
libPVRtoTS
libPVRtoTS
PVRDecoder
sam
samyGOso

and my old reserv this files re load.
and problem finish.

sory my language.

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Sun Sep 01, 2019 12:58 pm
by 4tune
What is this "remoteadmin.netcat.ad" warning i'm getting?

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Posted: Sun Sep 01, 2019 1:02 pm
by juusso
To gain tv access PVR decoder uses netcat, wich can be recognized as potential risk by some antivirus software. No worries, nobody wants harm you :)