[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte »

Yes, that TV is supported by newest SamyGO tools.

Yes, the PVRDecoder will decode your recordings, and you can play the file on any device
that support the .ts format, or you can encode it to whatever format that will play on your prefered device.

To gain status of donor, you should donate at LEAST ?10 ... Some electronic filter ignores donations less than ?10

Best of luck .. Its a nice TV :-)
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

Rider
Posts: 5
Joined: Sat Jan 10, 2015 8:17 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Rider »

And also does this tool record from Setup box like (Airtel Digital tv, Dish TV, Videocon HD? Please share the info thanks :)

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte »

Rider wrote:And also does this tool record from Setup box like (Airtel Digital tv, Dish TV, Videocon HD? Please share the info thanks :)
The tool dosent record anything. Your TV records "something", and the PVRDecoder allows decoding of that "something".
The actual source of the recording is of no consern, once the recording exists as a file on your USB-device (attached to TV).
The file gets decoded as a bytestream with no regards as to its content.
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

Rider
Posts: 5
Joined: Sat Jan 10, 2015 8:17 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Rider »

Lordbyte wrote:
Rider wrote:And also does this tool record from Setup box like (Airtel Digital tv, Dish TV, Videocon HD? Please share the info thanks :)
The tool dosent record anything. Your TV records "something", and the PVRDecoder allows decoding of that "something".
The actual source of the recording is of no consern, once the recording exists as a file on your USB-device (attached to TV).
The file gets decoded as a bytestream with no regards as to its content.
Thanks a lot for the info, If possible please make a faq for new users like me. :)

I'm gonna soon donate for H series :)

wechselgnom
SamyGO Project Donor
Posts: 5
Joined: Tue Dec 30, 2014 7:38 am

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by wechselgnom »

Successfully rooted my UE48H6270. It all works....

PVRdecoder works, connects to the TV and I can check the records for decoding. When decoding starts everytime the program says:

Examining DRM status for file ...
Recording is not DRM protected.
Lade 1,59 Gb von 1,59 Gb ..
File successfully retrieved.

Then the progress stops and I got the file as a ts-stream on HD. But it is not playable. Flying-Preview of the recorded srf-files produces the right preview-image in PVR-Decoder.
What do I have to do? Thanks a lot.

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte »

wechselgnom wrote:Successfully rooted my UE48H6270. It all works....

PVRdecoder works, connects to the TV and I can check the records for decoding. When decoding starts everytime the program says:

Examining DRM status for file ...
Recording is not DRM protected.
Lade 1,59 Gb von 1,59 Gb ..
File successfully retrieved.

Then the progress stops and I got the file as a ts-stream on HD. But it is not playable. Flying-Preview of the recorded srf-files produces the right preview-image in PVR-Decoder.
What do I have to do? Thanks a lot.
Seen this a couple of times by now, - Could you try setting port 23 for Telnet in the PVRDecoder settings and try again ?
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

wechselgnom
SamyGO Project Donor
Posts: 5
Joined: Tue Dec 30, 2014 7:38 am

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by wechselgnom »

Lordbyte wrote:
wechselgnom wrote:Successfully rooted my UE48H6270. It all works....

PVRdecoder works, connects to the TV and I can check the records for decoding. When decoding starts everytime the program says:

Examining DRM status for file ...
Recording is not DRM protected.
Lade 1,59 Gb von 1,59 Gb ..
File successfully retrieved.

Then the progress stops and I got the file as a ts-stream on HD. But it is not playable. Flying-Preview of the recorded srf-files produces the right preview-image in PVR-Decoder.
What do I have to do? Thanks a lot.
Seen this a couple of times by now, - Could you try setting port 23 for Telnet in the PVRDecoder settings and try again ?
That works. Thank you very much.

User avatar
erdem_ua
SamyGO Admin
Posts: 3114
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by erdem_ua »

Hi LordByte,
Today I tried PVRDecoder on my T-ECPDEUC-1010.3 to copy captured TV contest show that I am appear as a winner contestant :D .

Unfortunatelly, SamyGO PVRDecoder does not work on my PC properly.

The tool finds TV, connects TV's FTP port but cannot connect/Verify the Telnet port from port 23.
But I can connect to TV from 23 port by telnet command when I tried.

The Log says:
Connecting to 192.168.1.215:21 .. Success
Querying recordings on TV ...
Verifying telnet access to 192.168.1.215:23 .. (2/50)
Caching 20150103154131.inf
Verifying telnet access to 192.168.1.215:23 .. (49/50)
There is a problem with telnet access to the TV. Please investigate port.
:cry:

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte »

erdem_ua wrote:Hi LordByte,
Today I tried PVRDecoder on my T-ECPDEUC-1010.3 to copy captured TV contest show that I am appear as a winner contestant :D .

Unfortunatelly, SamyGO PVRDecoder does not work on my PC properly.

The tool finds TV, connects TV's FTP port but cannot connect/Verify the Telnet port from port 23.
But I can connect to TV from 23 port by telnet command when I tried.

The Log says:
Connecting to 192.168.1.215:21 .. Success
Querying recordings on TV ...
Verifying telnet access to 192.168.1.215:23 .. (2/50)
Caching 20150103154131.inf
Verifying telnet access to 192.168.1.215:23 .. (49/50)
There is a problem with telnet access to the TV. Please investigate port.
:cry:
Hi,

Could you Start the PVRDecoder, and click the ABORT-button, when its doing the (xx of yy) telnet-thing.
Then open the Netcat-monitor from the tool-menu, and then open Settings, and just click OK (will force a re-scan).
Is there anything going on in the netcat-monitor at all afther this .. and could you paste the log here, please ?
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

User avatar
erdem_ua
SamyGO Admin
Posts: 3114
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by erdem_ua »

Netcat-monitor from tool menu?
Where it is?
PVRDecoder has no menu option like that on tools menu (tool button) :?:

Post Reply

Return to “[F] Software”