[App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support

Here are software that related with Samsung F series TVs.
Post Reply

sectroyer
Official SamyGO Developer
Posts: 5565
Joined: Wed May 04, 2011 5:10 pm

[App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support

Post by sectroyer » Fri Mar 28, 2014 7:36 pm

Remote control key remapping

With this tool you can re-define keys of your remote control, by assigning any other key or commandline (allowing key macros, for example).

Usage:
*For D series (arm), replace every instance of /mnt below by /mtd_rwcommon/widgets/user/SamyGO/SamyGO
*For C series (arm), replace every instance of /mnt below by /SamyGO on your rooting USB device
  • Get latest samyGOso from there and copy/overwrite samyGOso file (not folder) to /mnt/opt/privateer/usr/bin
  • Set permissions if needed (usually not if overwritten)

    Code: Select all

    chmod +x /mnt/opt/privateer/usr/bin/samyGOso
  • Extract attached archives and copy libRCremap.so and libRCremap.config to /mnt/opt/privateer/usr/libso (folder may not exist, create it if needed. Both files always have to be together in same folder)
  • Execute

    Code: Select all

    samyGOso -d -T -B -r -l /mnt/opt/privateer/usr/libso/libRCremap.so
    You can only remap keys once per TV boot. If you need to redefine keys, you have to reboot TV first.
  • Default config is for testing only and should invert up/down and left/right keys, and create/delete a test file with keys 1/2, so you HAVE TO edit libRCremap.config. Here's default config:
    SpoilerShow

    Code: Select all

    [
        {
            "KEY_VOLUP": "KEY_VOLDOWN"
        },
        {
            "KEY_VOLDOWN": "KEY_VOLUP"
        },
        {
            "KEY_CHDOWN": "KEY_CHUP"
        },
        {
            "KEY_CHUP": "KEY_CHDOWN"
        },
        {
            "KEY_1": "CMD:touch /tmp/test.txt"
        },
        {
            "KEY_2": "CMD:rm /tmp/test.txt"
        }
    ]
    "KEY_to_remap": "KEY_to_assign"
    For validating config you can use e.g. http://jsonlint.com/
  • Key list:
    SpoilerShow

    Code: Select all

    enum samyGO_RCKeys
    {
        KEY_MTS = 0,
        KEY_SOURCE = 1,
        BD_KEY_POWER = 2,
        KEY_SLEEP = 3,
        KEY_1 = 4,
        KEY_2 = 5,
        KEY_3 = 6,
        KEY_VOLUP = 7,
        KEY_4 = 8,
        KEY_5 = 9,
        KEY_6 = 10,
        KEY_VOLDOWN = 11,
        KEY_7 = 12,
        KEY_8 = 13,
        KEY_9 = 14,
        KEY_MUTE = 15,
        KEY_CHDOWN = 16,
        KEY_0 = 17,
        KEY_CHUP = 18,
        KEY_PRECH = 19,
        KEY_GREEN = 20,
        KEY_YELLOW = 21,
        KEY_CYAN = 22,
        KEY_VAL_23 = 23,
        KEY_VAL_24 = 24,
        KEY_ADDDEL = 25,
        KEY_MENU = 26,
        KEY_TV = 27,
        KEY_VAL_28 = 28,
        KEY_VAL_29 = 29,
        KEY_VAL_30 = 30,
        KEY_INFO = 31,
        KEY_PIP_ONOFF = 32,
        KEY_PIP_SWAP = 33,
        KEY_VAL_34 = 34,
        KEY_PLUS100 = 35,
        KEY_VAL_36 = 36,
        KEY_CAPTION = 37,
        KEY_VAL_38 = 38,
        KEY_AD = 39,
        KEY_PMODE = 40,
        KEY_VAL_41 = 41,
        KEY_VAL_42 = 42,
        KEY_VAL_43 = 43,
        KEY_TTX_MIX = 44,
        KEY_EXIT = 45,
        KEY_VAL_46 = 46,
        KEY_PIP_SIZE = 47,
        KEY_MAGIC_CHANNEL = 48,
        KEY_PIP_SCAN = 49,
        KEY_PIP_CHUP = 50,
        KEY_PIP_CHDOWN = 51,
        KEY_DEVICE_CONNECT = 52,
        KEY_HELP = 53,
        KEY_ANTENA = 54,
        KEY_CONVERGENCE = 55,
        KEY_11 = 56,
        KEY_12 = 57,
        KEY_AUTO_PROGRAM = 58,
        KEY_RSURF = 61,
        KEY_PICTURE_SIZE = 62,
        KEY_TOPMENU = 63,
        KEY_GAME = 64,
        KEY_QUICK_REPLAY = 65,
        KEY_STILL_PICTURE = 66,
        KEY_DTV = 67,
        KEY_FAVCH = 68,
        KEY_REWIND = 69,
        KEY_STOP = 70,
        KEY_PLAY = 71,
        KEY_FF = 72,
        KEY_REC = 73,
        KEY_PAUSE = 74,
        KEY_TOOLS = 75,
        KEY_INSTANT_REPLAY = 76,
        KEY_LINK = 77,
        KEY_FF_ = 78,
        KEY_GUIDE = 79,
        KEY_REWIND_ = 80,
        KEY_ANGLE = 81,
        KEY_RESERVED1 = 82,
        KEY_ZOOM1 = 83,
        KEY_PROGRAM = 84,
        KEY_BOOKMARK = 85,
        KEY_DISC_MENU = 86,
        KEY_PRINT = 87,
        KEY_RETURN = 88,
        KEY_SUB_TITLE = 89,
        KEY_CLEAR = 90,
        KEY_VCHIP = 91,
        KEY_REPEAT = 92,
        KEY_DOOR = 93,
        KEY_OPEN = 94,
        KEY_WHEEL_LEFT = 95,
        KEY_UP = 96,
        KEY_DOWN = 97,
        KEY_RIGHT = 98,
        KEY_DMA = 99,
        KEY_TURBO = 100,
        KEY_LEFT = 101,
        KEY_FM_RADIO = 102,
        KEY_DVR_MENU = 103,
        KEY_ENTER = 104,
        KEY_PCMODE = 105,
        KEY_TTX_SUBFACE = 106,
        KEY_CH_LIST = 107,
        KEY_RED = 108,
        KEY_DNIe = 109,
        KEY_SRS = 110,
        KEY_CONVERT_AUDIO_MAINSUB = 111,
        KEY_MDC = 112,
        KEY_SEFFECT = 113,
        KEY_DVR = 114,
        KEY_DTV_SIGNAL = 115,
        KEY_LIVE = 116,
        KEY_PERPECT_FOCUS = 117,
        KEY_HOME = 118,
        KEY_ESAVING = 119,
        KEY_WHEEL_RIGHT = 120,
        KEY_CONTENTS = 121,
        KEY_VCR_MODE = 122,
        KEY_CATV_MODE = 123,
        KEY_DSS_MODE = 124,
        KEY_TV_MODE = 125,
        KEY_DVD_MODE = 126,
        KEY_STB_MODE = 127,
        KEY_CALLER_ID = 128,
        KEY_SCALE = 129,
        KEY_ZOOM_MOVE = 130,
        KEY_CLOCK_DISPLAY = 131,
        KEY_AV1 = 132,
        KEY_SVIDEO1 = 133,
        KEY_COMPONENT1 = 134,
        KEY_SETUP_CLOCK_TIMER = 135,
        KEY_COMPONENT2 = 136,
        KEY_MAGIC_BRIGHT = 137,
        KEY_DVI = 138,
        KEY_HDMI = 139,
        KEY_W_LINK = 140,
        KEY_DTV_LINK = 141,
        KEY_VAL_142 = 142,
        KEY_APP_LIST = 143,
        KEY_BACK_MHP = 144,
        KEY_ALT_MHP = 145,
        KEY_DNSe = 146,
        KEY_RSS = 147,
        KEY_ENTERTAINMENT = 148,
        KEY_ID_INPUT = 149,
        KEY_ID_SETUP = 150,
        KEY_ANYNET = 151,
        KEY_POWEROFF = 152,
        KEY_POWERON = 153,
        KEY_ANYVIEW = 154,
        KEY_MS = 155,
        KEY_MORE = 156,
        KEY_PANNEL_POWER = 157,
        KEY_PANNEL_CHUP = 158,
        KEY_PANNEL_CHDOWN = 159,
        KEY_PANNEL_VOLUP = 160,
        KEY_PANNEL_VOLDOW = 161,
        KEY_PANNEL_ENTER = 162,
        KEY_PANNEL_MENU = 163,
        KEY_PANNEL_SOURCE = 164,
        KEY_AV2 = 165,
        KEY_AV3 = 166,
        KEY_SVIDEO2 = 167,
        KEY_SVIDEO3 = 168,
        KEY_ZOOM2 = 169,
        KEY_PANORAMA = 170,
        KEY_4_3 = 171,
        KEY_16_9 = 172,
        KEY_DYNAMIC = 173,
        KEY_STANDARD = 174,
        KEY_MOVIE1 = 175,
        KEY_CUSTOM = 176,
        KEY_AUTO_ARC_RESET = 177,
        KEY_AUTO_ARC_LNA_ON = 178,
        KEY_AUTO_ARC_LNA_OFF = 179,
        KEY_AUTO_ARC_ANYNET_MODE_OK = 180,
        KEY_AUTO_ARC_ANYNET_AUTO_START = 181,
        KEY_AUTO_FORMAT = 182,
        KEY_DNET = 183,
        KEY_HDMI1 = 184,
        KEY_AUTO_ARC_CAPTION_ON = 185,
        KEY_AUTO_ARC_CAPTION_OFF = 186,
        KEY_AUTO_ARC_PIP_DOUBLE = 187,
        KEY_AUTO_ARC_PIP_LARGE = 188,
        KEY_AUTO_ARC_PIP_SMALL = 189,
        KEY_AUTO_ARC_PIP_WIDE = 190,
        KEY_AUTO_ARC_PIP_LEFT_TOP = 191,
        KEY_AUTO_ARC_PIP_RIGHT_TOP = 192,
        KEY_AUTO_ARC_PIP_LEFT_BOTTOM = 193,
        KEY_AUTO_ARC_PIP_RIGHT_BOTTOM = 194,
        KEY_AUTO_ARC_PIP_CH_CHANGE = 195,
        KEY_AUTO_ARC_AUTOCOLOR_SUCCESS = 196,
        KEY_AUTO_ARC_AUTOCOLOR_FAIL = 197,
        KEY_AUTO_ARC_C_FORCE_AGING = 198,
        KEY_AUTO_ARC_USBJACK_INSPECT = 199,
        KEY_AUTO_ARC_JACK_IDENT = 200,
        KEY_NINE_SEPERATE = 201,
        KEY_ZOOM_IN = 202,
        KEY_ZOOM_OUT = 203,
        KEY_MIC = 204,
        KEY_HDMI2 = 205,
        KEY_HDMI3 = 206,
        KEY_AUTO_ARC_CAPTION_KOR = 207,
        KEY_AUTO_ARC_CAPTION_ENG = 208,
        KEY_AUTO_ARC_PIP_SOURCE_CHANGE = 209,
        KEY_HDMI4 = 210,
        KEY_AUTO_ARC_ANTENNA_AIR = 211,
        KEY_AUTO_ARC_ANTENNA_CABLE = 212,
        KEY_AUTO_ARC_ANTENNA_SATELLITE = 213,
        KEY_EXT1 = 214,
        KEY_EXT2 = 215,
        KEY_EXT3 = 216,
        KEY_EXT4 = 217,
        KEY_EXT5 = 218,
        KEY_EXT6 = 219,
        KEY_EXT7 = 220,
        KEY_EXT8 = 221,
        KEY_EXT9 = 222,
        KEY_EXT10 = 223,
        KEY_EXT11 = 224,
        KEY_EXT12 = 225,
        KEY_EXT13 = 226,
        KEY_EXT14 = 227,
        KEY_EXT15 = 228,
        KEY_EXT16 = 229,
        KEY_EXT17 = 230,
        KEY_EXT18 = 231,
        KEY_EXT19 = 232,
        KEY_EXT20 = 233,
        KEY_EXT21 = 234,
        KEY_EXT22 = 235,
        KEY_EXT23 = 236,
        KEY_EXT24 = 237,
        KEY_EXT25 = 238,
        KEY_EXT26 = 239,
        KEY_EXT27 = 240,
        KEY_EXT28 = 241,
        KEY_EXT29 = 242,
        KEY_EXT30 = 243,
        KEY_EXT31 = 244,
        KEY_EXT32 = 245,
        KEY_EXT33 = 246,
        KEY_EXT34 = 247,
        KEY_EXT35 = 248,
        KEY_EXT36 = 249,
        KEY_EXT37 = 250,
        KEY_EXT38 = 251,
        KEY_EXT39 = 252,
        KEY_EXT40 = 253,
        KEY_EXT41 = 254,
    
        KEY_SERVICE = 59,
        KEY_3SPEED = 60,
    };
    
  • List of most interesting keys:
    SpoilerShow

    Code: Select all

    3D = KEY_PANNEL_CHDOWN
    Support = KEY_TOPMENU
    Fam. Story = KEY_AUTO_ARC_C_FORCE_AGING
    History = KEY_AUTO_ARC_CAPTION_ENG
    AD/Subt. = KEY_AD
    AD/Subt. = KEY_CAPTION
    Camera = KEY_AUTO_ARC_USBJACK_INSPECT
    Search = KEY_DTV_SIGNAL
    Sleeptimer = KEY_SLEEP
    Bluetooth on/off? = KEY_AUTO_ARC_PIP_SOURCE_CHANGE
    Picture Format = KEY_ASPECT
    Picture Format = KEY_PICTURE_SIZE
    Social TV = KEY_TURBO
    AllShare Play = KEY_AV2
    SmartTV = KEY_CONTENTS
    Direct to internet browser = KEY_CONVERGENCE
    Energie Saving = KEY_ESAVING
    Picture Mode = KEY_PMODE
    "D" = KEY_APP_LIST
  • Autostart
    • Copy 99_95_RCremap.init to /mnt/etc/init.d
    • Set permissions

      Code: Select all

      chmod +x /mnt/etc/init.d/99_95_RCremap.init
Usage of CMD support:
  • With that version, it's possible to map a commandline to any remote control key. To do so, you have to remap to CMD:/path/to/your/script in libRCremap.config file. e.g.:

    Code: Select all

    ...
        {
            "KEY_DTV_SIGNAL": "CMD:/mnt/opt/privateer/usr/bin/script"
        },
    ...
    Don't forget to give execution rights to your script (chmod +x /mnt/opt/privateer/usr/bin/script)
  • Every script have to begin with a little check to prevent several instances of it to be executed at once (in case you press RC key "a bit too long":

    Code: Select all

    #!/bin/sh
    [ $(pidof ${0##*/}) ] 2>/dev/null || exit 0
    You may also add some sleep at the end of it to prevent new execution before some time. e.g. 2 seconds:

    Code: Select all

    sleep 2
  • Here's sample full script sending consecutive keys (macro), uses samyGOrc (check your TV series section if you want to get and install suitable version, and for how-to)
    SpoilerShow

    Code: Select all

    #!/bin/sh
    [ $(pidof ${0##*/}) ] 2>/dev/null || exit 0
    PATCHDIR=${0%/*}
    PID_EXE=$(pidof exeDSP || pidof exeTV)
    
    	$PATCHDIR/samyGOrc -p $PID_EXE 107 108			# CH_LIST, RED
    	sleep 1
    	$PATCHDIR/samyGOrc -p $PID_EXE 97 104			# DOWN, ENTER
    	sleep 3
    	$PATCHDIR/samyGOrc -p $PID_EXE 45 45			# EXIT, EXIT
    What script does: KEY_CH_LIST->KEY_RED->wait 1 sec->KEY_DOWN->KEY_ENTER->wait 3 sec->Key_EXIT->KEY_EXIT
    It's supposed to move to next tuner type on (at least) E series. Just an example anyway.
    samyGOrc and CMD script have to be in the same folder together.
Known issue: For some reason, patch can't handle a 'CMD:' as first (or only) remap. If that's what you expected, workaround is to first remap any key to itself in .config.

In case you couldn't find expected key(s) to remap, especially due to labels consistency (!!), here's a small tool to monitor RC keypresses (D/E/F/H only)Image
  • libLogRCkey.zip
  • Extract archive and copy libLogRCkey.so to /mnt/opt/privateer/usr/libso
  • Inject:

    Code: Select all

    samyGOso -d -T -B -r -l /mnt/opt/privateer/usr/libso/libLogRCkey.so
  • Each keypress will be then logged to /dtv/LogRCkey.log
    SpoilerShow

    Code: Select all

    [...]
    [LogRCkey] Init done, now monitoring RC keypress...
    [LogRCkey] Input: 0     Key: 104 KEY_ENTER
    [LogRCkey] Input: 0     Key: 98 KEY_RIGHT
    [LogRCkey] Input: 0     Key: 97 KEY_DOWN
    [LogRCkey] Input: 0     Key: 96 KEY_UP
    [LogRCkey] Input: 0     Key: 101 KEY_LEFT
    [LogRCkey] Input: 1     Key: 7 KEY_VOLUP
    [LogRCkey] Input: 1     Key: 11 KEY_VOLDOWN
    [...]
*Changelog:

Code: Select all

2/4/2014
v0.3.5 - added surprise :)
* Fixed multiple keys issue on D
* Added C support
* CMD support
1/9/2013
v0.2.2 - public release version
You do not have the required permissions to view the files attached to this post.
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

User avatar
greenhorn
SamyGO Project Donor
Posts: 685
Joined: Wed Feb 15, 2012 3:05 pm
Location: Eastern Europe

Re: [APP] SamyGO RCremap for C/D(arm)

Post by greenhorn » Sun Mar 30, 2014 2:28 pm

Great! Works!
SpoilerShow
# ./samyGOso -p $(pidof exeTV || pidof exeDSP) -l /dtv/usb/sda1/SamyGO/opt/privateer/usr/sbin/libRCremap.so -r
samyGOso v1.2.2 (c) bugficks 2013
Injecting '/dtv/usb/sda1/SamyGO/opt/privateer/usr/sbin/libRCremap.so' resident: '1'
adding libc addr to found symaddress c81a0 + 42c2d000 42cf51a0
Succeeded.
and LOG:

Code: Select all

[RCremap] SamyGO RCremap v0.2.2 log - (c) bugficks 2013
[RCremap] mapping key: 'KEY_VOLUP' to 'KEY_VOLDOWN'
[RCremap] mapping key: 'KEY_VOLDOWN' to 'KEY_VOLUP'
[RCremap] mapping key: 'KEY_CHDOWN' to 'KEY_CHUP'
[RCremap] mapping key: 'KEY_CHUP' to 'KEY_CHDOWN'
[RCremap] Trying to get _ZN9KeyCommon17SendKeyPressInputEiis on C.
[RCremap] Found _ZN9TDBuilder8GetTDiCPE16TDSourceObject_k location at: 0x002dd460
[RCremap] Found _fini location at: 0x01aacb24
[RCremap] text range: @0x0025d460 -> @0x0020d460
[RCremap] rodata range: @0x01aacb24 -> @0x0a2acb24
[RCremap] Found SendKeyPressInput at @0x0024546c
[RCremap] SendKeyPressInput address: 0x0024546c
[RCremap] _ZN9KeyCommon17SendKeyPressInputEiis address: 0x00245330
[RCremap] 1 _ZN9KeyCommon17SendKeyPressInputEiis [0x245330].
[RCremap] init done...
TV: UE40F7000 - T-FXPDEUC-1115.0 - SamyGO Extensions on F series
TV: UE55ES7000S - T-ECPDEUC-2003.4 - SamyGO tool Right from USB - no develop account is needed
TV: UE40C6710 - T-VALDEUC 3011 - Hacking TV over Hotel mode (C650 T-VALDEUC-3009.2)
BD-Player: BD-E6100 - B-FIRBPEWWC 1063.3 - rooted, no more Cin@vi@
NAS: CIFS: MAG250 NFS: Playon!HD

sectroyer
Official SamyGO Developer
Posts: 5565
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by sectroyer » Wed Apr 02, 2014 9:47 pm

Surprise added, juuso test :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

zoelechat
SamyGO Moderator
Posts: 7471
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by zoelechat » Wed Apr 02, 2014 9:59 pm

How to use "surprise"? :)
I do NOT reply to any question by PM. Please use forum.

sectroyer
Official SamyGO Developer
Posts: 5565
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by sectroyer » Wed Apr 02, 2014 10:05 pm

zoelechat wrote:How to use "surprise"? :)
Surprise will be revealed when it will be confirmed that it works stably across all devices :) Does it work for you ? :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

zoelechat
SamyGO Moderator
Posts: 7471
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by zoelechat » Wed Apr 02, 2014 10:09 pm

It works as previous version with my existing remap config, yes. But if you're talking about surprise I'm still searching where it is :)
I do NOT reply to any question by PM. Please use forum.

sectroyer
Official SamyGO Developer
Posts: 5565
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by sectroyer » Wed Apr 02, 2014 10:12 pm

zoelechat wrote:It works as previous version with my existing remap config, yes. But if you're talking about surprise I'm still searching where it is :)
Ehh I am not religious guy but maybe a good answer will be Mathew 7 7:
Ask, and it will be given to you; seek, and you will find; knock, and it will be opened to you.
:D
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

zoelechat
SamyGO Moderator
Posts: 7471
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by zoelechat » Wed Apr 02, 2014 10:20 pm

I see something like "CMD:" in my crystal ball :)
I do NOT reply to any question by PM. Please use forum.

sectroyer
Official SamyGO Developer
Posts: 5565
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by sectroyer » Wed Apr 02, 2014 10:24 pm

zoelechat wrote:I see something like "CMD:" in my crystal ball :)
Hehe, use it wisely grasshopper ;)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

zoelechat
SamyGO Moderator
Posts: 7471
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [APP] SamyGO RCremap for C/D(arm)/E/F with surprise :)

Post by zoelechat » Wed Apr 02, 2014 10:44 pm

For feedback, I've done a quick test with samyGOrc_test, surprise works as expected.

Code: Select all

[RCremap] mapping key: 'KEY_TOPMENU' to command: '/mnt/opt/privateer/usr/patch/samyGOrc_test'
I'm going to try my famous air to sat sequence with needed delays and so on. Btw, thanks! ;)
I do NOT reply to any question by PM. Please use forum.

Post Reply

Return to “[F] Software”

Who is online

Users browsing this forum: Google [Bot] and 3 guests