[ROOT] Rooting E/F on latest firmwares

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

phdez29
Posts: 5
Joined: Wed Aug 17, 2016 3:02 am

Re: [App] Rooting E/F on latest firmwares

Post by phdez29 »

Hi, i root mi tv and now i dont see anythinf, but it power on. I follow the next steps:

1) Identify the TV's firmware version by acessing the "Extended Service Menu". Follow the steps below to do it:
Turn the power off. On the remote, press Mute followed by 1, 8, 2, Power in sequence. (site: http://factory-reset.com/wiki/Samsung_Service_Menu).

2) The TV should display the menu as described on this image. Take note of the firmware name. The important thing to know if whether it contains MST or not. The sample image displays T-MST12UABC-1121.1:
https://goo.gl/photos/aCkjcchqTQeUhCZK9

3) Disable the OTN Support: On the "Extended Service Menu" (step #1 above), go to the Menu "Option", then "MRT Option", and change "OTN Support" to off

4) Format a USB drive using FAT

5) Download and unzip the file SamyGO_data.zip from download/file.php?id=7670

6) Download and unzip the file samyext4.img.F.zip from https://www.dropbox.com/s/i6v2sus8kd18x ... F.zip?dl=0

7) Copy file samyext4.img to the folder SamyGO_data that was unziped on step #5.

8) Download and unzip the file from download/file.php?id=7533.

7) At this point you should have 2 folders in your computer: SamyGO-F-SM-MST-Fix and SamyGO_data. Copy both of them to the your USB drive formatted on step #4

8) Connect your TV to the internet using a ETHERNET cable (it does not work with wi-fi)

9) Connect the USB drive in your TV

10) Click on the Smart HUB button on your remote controller and go to "More Apps" when the screen loads

11) At this point you should see the widget "SamyGO-F-SM-MST-Fix". If you don't, repeat the steps 9 and 10 after restarting your TV

12) The widget will automatically start and finish the installation and will ask you to restart the TV when it finishes. Here is a picture of the process when it is done: https://goo.gl/photos/GpbWkR37pYb2M7du8

13) Reboot TV and wait 1-2 minutes.

14) Now SamyGO should auto start and the basic services telnet/ftp/etc should work just fine.
phdez29
Posts: 5
Joined: Wed Aug 17, 2016 3:02 am

Re: [App] Rooting E/F on latest firmwares

Post by phdez29 »

phdez29 wrote: Sun May 28, 2017 12:35 am Hi, i root mi tv and now i dont see anythinf, but it power on. I follow the next steps:

1) Identify the TV's firmware version by acessing the "Extended Service Menu". Follow the steps below to do it:
Turn the power off. On the remote, press Mute followed by 1, 8, 2, Power in sequence. (site: http://factory-reset.com/wiki/Samsung_Service_Menu).

2) The TV should display the menu as described on this image. Take note of the firmware name. The important thing to know if whether it contains MST or not. The sample image displays T-MST12UABC-1121.1:
https://goo.gl/photos/aCkjcchqTQeUhCZK9

3) Disable the OTN Support: On the "Extended Service Menu" (step #1 above), go to the Menu "Option", then "MRT Option", and change "OTN Support" to off

4) Format a USB drive using FAT

5) Download and unzip the file SamyGO_data.zip from download/file.php?id=7670

6) Download and unzip the file samyext4.img.F.zip from https://www.dropbox.com/s/i6v2sus8kd18x ... F.zip?dl=0

7) Copy file samyext4.img to the folder SamyGO_data that was unziped on step #5.

8) Download and unzip the file from download/file.php?id=7533.

7) At this point you should have 2 folders in your computer: SamyGO-F-SM-MST-Fix and SamyGO_data. Copy both of them to the your USB drive formatted on step #4

8) Connect your TV to the internet using a ETHERNET cable (it does not work with wi-fi)

9) Connect the USB drive in your TV

10) Click on the Smart HUB button on your remote controller and go to "More Apps" when the screen loads

11) At this point you should see the widget "SamyGO-F-SM-MST-Fix". If you don't, repeat the steps 9 and 10 after restarting your TV

12) The widget will automatically start and finish the installation and will ask you to restart the TV when it finishes. Here is a picture of the process when it is done: https://goo.gl/photos/GpbWkR37pYb2M7du8

13) Reboot TV and wait 1-2 minutes.

14) Now SamyGO should auto start and the basic services telnet/ftp/etc should work just fine.
I reset my tv to factory, and nothig happened, what should i do?
noahjoseph
SamyGO Project Donor
Posts: 55
Joined: Thu Oct 29, 2015 4:11 pm

Re: [App] Rooting E/F on latest firmwares

Post by noahjoseph »

My Root is Not working sometimes. What should i do? I tried the Solutions for root fix. Not working. My root was working Fine for months. I didnt update the tv... also i tried to reinstall to root, but worked only two times, After that root is not working correctly on every startup . I keep the USB plugged on my tv. Also virt USB Not showing only my usb Drive....

I have a es8090
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: [App] Rooting E/F on latest firmwares

Post by juusso »

Take another usb and download required files once again. In the other words: root your tv again with another USB dongle used.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
noahjoseph
SamyGO Project Donor
Posts: 55
Joined: Thu Oct 29, 2015 4:11 pm

Re: [App] Rooting E/F on latest firmwares

Post by noahjoseph »

ok will try
noahjoseph
SamyGO Project Donor
Posts: 55
Joined: Thu Oct 29, 2015 4:11 pm

Re: [App] Rooting E/F on latest firmware

Post by noahjoseph »

juusso wrote: Tue Jun 06, 2017 9:10 am Take another usb and download required files once again. In the other words: root your tv again with another USB dongle used.
It doesnt work. My root started for two times but after that its not working. I dont know why is it like this. I have installed the root one year ago without problems. But now When the root is not starting, then my smarthub is also not starting. My tv shows my usb but not the virtuall usb. I did also soft factory reset, but nothing changed... Please help me. When the root is not starting, then oscam will not start right?
hbatista
SamyGO Project Donor
Posts: 7
Joined: Mon Nov 23, 2015 10:40 am

Help UE40ES6800 root and ftp telnet

Post by hbatista »

Hello, can anyone tell me the settings (folders, files) for tv UE40ES6800?

T-MST10PDEUC - 1029.0
T-MST10PDEUS - 1001
ONT Support OFF
Watchdog OFF

With this configuration I have FTP access but telnet NOK

1. Unpack SamyGO_data_E.zip to FAT32 USB (download here download / file.php? Id = 4566)
2. Extract SamyGO.zip find file samyext4.img and copy file samyext4.img to folder SamyGO_data on FAT32 USB (download here: http: //download.samygo.tv/F%20Series/Widgets/SamyGO.zip)
3. Copy file 128mb.xfs to folder SamyGO_data on FAT32 USB (Download here https://www.sendspace.com/file/el3xm8)
4. Unpack SamyGO-F-SM-MST-Fix-USB to FAT32 USB (Download here download / file.php? Id = 4534)
5. Connect USB to TV

I also tested with this:
For E SERIES !!!! Do this:
* E-MST users, better go there.
Unpack attached SamyGO_data_E.zip to FAT USB
Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from / data folder of this archive
Copy file 128mb.xfs to folder SamyGO_data on FAT USB
Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
Connect to TV
Launch SamyGO-F from SmartHub (if it does not appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF !!!
The widget will automatically finish installation (and does not need to push any buttons) and close itself
Now SamyGO is started and telnet / ftp / etc. Should work
If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart
In case of problems please check NETcat (NOT Ncat and NOT telnet) on ports 3023, 3123, 4023, 4123, 5023, 5123 and report result
But it does not work.

If you can help me, thank you.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: [App] Rooting E/F on latest firmwares

Post by juusso »

When no Smarthub is started, then no SamyGo, no root, no virtual usb...

The most important thing is what has been happened with smarthub? This has caused all other consequenses...

LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
noahjoseph
SamyGO Project Donor
Posts: 55
Joined: Thu Oct 29, 2015 4:11 pm

Re: [App] Rooting E/F on latest firmwares

Post by noahjoseph »

juusso wrote: Fri Jun 09, 2017 7:20 pm When no Smarthub is started, then no SamyGo, no root, no virtual usb...

The most important thing is what has been happened with smarthub? This has caused all other consequenses...
When trying to open smart hub, tv starts to freeze. Otherwise smarthub takes about 10 min to start (sometimes smart hub is even not available)

What can i do that smart hub is not allways reinstalling in the background?
hbatista
SamyGO Project Donor
Posts: 7
Joined: Mon Nov 23, 2015 10:40 am

Re: [App] Rooting E/F on latest firmwares

Post by hbatista »

noahjoseph wrote: Fri Jun 09, 2017 9:42 pm
juusso wrote: Fri Jun 09, 2017 7:20 pm When no Smarthub is started, then no SamyGo, no root, no virtual usb...

The most important thing is what has been happened with smarthub? This has caused all other consequenses...
When trying to open smart hub, tv starts to freeze. Otherwise smarthub takes about 10 min to start (sometimes smart hub is even not available)

What can i do that smart hub is not allways reinstalling in the background?
I turn on the tv and go to smarthub, and I have the application:
I can connect to ftp port 21 ok
Telnet connection port 23 nok

I'm going to smarthub download in SamyGo application:
Ftp ok
Telnet nok

Post Reply

Return to “[F] Software”